#include <linux/sched.h>
-/* Define to 1 to always calibrate all possible LO control pairs.
- * This is a workaround until we fix the partial LO calibration optimization. */
-#define B43_CALIB_ALL_LOCTLS 1
+static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
+{
+ struct b43_lo_calib *c;
+
+ list_for_each_entry(c, &lo->calib_list, list) {
+ if (!b43_compare_bbatt(&c->bbatt, bbatt))
+ continue;
+ if (!b43_compare_rfatt(&c->rfatt, rfatt))
+ continue;
+ return c;
+ }
+ return NULL;
+}
/* Write the LocalOscillator Control (adjust) value-pair. */
static void b43_lo_write(struct b43_wldev *dev, struct b43_loctl *control)
b43_phy_write(dev, reg, value);
}
-static int assert_rfatt_and_bbatt(const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt,
- struct b43_wldev *dev)
-{
- int err = 0;
-
- /* Check the attenuation values against the LO control array sizes. */
- if (unlikely(rfatt->att >= B43_NR_RF)) {
- b43err(dev->wl, "rfatt(%u) >= size of LO array\n", rfatt->att);
- err = -EINVAL;
- }
- if (unlikely(bbatt->att >= B43_NR_BB)) {
- b43err(dev->wl, "bbatt(%u) >= size of LO array\n", bbatt->att);
- err = -EINVAL;
- }
-
- return err;
-}
-
-#if !B43_CALIB_ALL_LOCTLS
-static
-struct b43_loctl *b43_get_lo_g_ctl_nopadmix(struct b43_wldev *dev,
- const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
-
- if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
- return &(lo->no_padmix[0][0]); /* Just prevent a crash */
- return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-#endif /* !B43_CALIB_ALL_LOCTLS */
-
-struct b43_loctl *b43_get_lo_g_ctl(struct b43_wldev *dev,
- const struct b43_rfatt *rfatt,
- const struct b43_bbatt *bbatt)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
-
- if (assert_rfatt_and_bbatt(rfatt, bbatt, dev))
- return &(lo->no_padmix[0][0]); /* Just prevent a crash */
- if (rfatt->with_padmix)
- return &(lo->with_padmix[bbatt->att][rfatt->att]);
- return &(lo->no_padmix[bbatt->att][rfatt->att]);
-}
-
-/* Call a function for every possible LO control value-pair. */
-static void b43_call_for_each_loctl(struct b43_wldev *dev,
- void (*func) (struct b43_wldev *,
- struct b43_loctl *))
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *ctl = phy->lo_control;
- int i, j;
-
- for (i = 0; i < B43_NR_BB; i++) {
- for (j = 0; j < B43_NR_RF; j++)
- func(dev, &(ctl->with_padmix[i][j]));
- }
- for (i = 0; i < B43_NR_BB; i++) {
- for (j = 0; j < B43_NR_RF; j++)
- func(dev, &(ctl->no_padmix[i][j]));
- }
-}
-
-static u16 lo_b_r15_loop(struct b43_wldev *dev)
-{
- int i;
- u16 ret = 0;
-
- for (i = 0; i < 10; i++) {
- b43_phy_write(dev, 0x0015, 0xAFA0);
- udelay(1);
- b43_phy_write(dev, 0x0015, 0xEFA0);
- udelay(10);
- b43_phy_write(dev, 0x0015, 0xFFA0);
- udelay(40);
- ret += b43_phy_read(dev, 0x002C);
- }
-
- return ret;
-}
-
-void b43_lo_b_measure(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- u16 regstack[12] = { 0 };
- u16 mls;
- u16 fval;
- int i, j;
-
- regstack[0] = b43_phy_read(dev, 0x0015);
- regstack[1] = b43_radio_read16(dev, 0x0052) & 0xFFF0;
-
- if (phy->radio_ver == 0x2053) {
- regstack[2] = b43_phy_read(dev, 0x000A);
- regstack[3] = b43_phy_read(dev, 0x002A);
- regstack[4] = b43_phy_read(dev, 0x0035);
- regstack[5] = b43_phy_read(dev, 0x0003);
- regstack[6] = b43_phy_read(dev, 0x0001);
- regstack[7] = b43_phy_read(dev, 0x0030);
-
- regstack[8] = b43_radio_read16(dev, 0x0043);
- regstack[9] = b43_radio_read16(dev, 0x007A);
- regstack[10] = b43_read16(dev, 0x03EC);
- regstack[11] = b43_radio_read16(dev, 0x0052) & 0x00F0;
-
- b43_phy_write(dev, 0x0030, 0x00FF);
- b43_write16(dev, 0x03EC, 0x3F3F);
- b43_phy_write(dev, 0x0035, regstack[4] & 0xFF7F);
- b43_radio_write16(dev, 0x007A, regstack[9] & 0xFFF0);
- }
- b43_phy_write(dev, 0x0015, 0xB000);
- b43_phy_write(dev, 0x002B, 0x0004);
-
- if (phy->radio_ver == 0x2053) {
- b43_phy_write(dev, 0x002B, 0x0203);
- b43_phy_write(dev, 0x002A, 0x08A3);
- }
-
- phy->minlowsig[0] = 0xFFFF;
-
- for (i = 0; i < 4; i++) {
- b43_radio_write16(dev, 0x0052, regstack[1] | i);
- lo_b_r15_loop(dev);
- }
- for (i = 0; i < 10; i++) {
- b43_radio_write16(dev, 0x0052, regstack[1] | i);
- mls = lo_b_r15_loop(dev) / 10;
- if (mls < phy->minlowsig[0]) {
- phy->minlowsig[0] = mls;
- phy->minlowsigpos[0] = i;
- }
- }
- b43_radio_write16(dev, 0x0052, regstack[1] | phy->minlowsigpos[0]);
-
- phy->minlowsig[1] = 0xFFFF;
-
- for (i = -4; i < 5; i += 2) {
- for (j = -4; j < 5; j += 2) {
- if (j < 0)
- fval = (0x0100 * i) + j + 0x0100;
- else
- fval = (0x0100 * i) + j;
- b43_phy_write(dev, 0x002F, fval);
- mls = lo_b_r15_loop(dev) / 10;
- if (mls < phy->minlowsig[1]) {
- phy->minlowsig[1] = mls;
- phy->minlowsigpos[1] = fval;
- }
- }
- }
- phy->minlowsigpos[1] += 0x0101;
-
- b43_phy_write(dev, 0x002F, phy->minlowsigpos[1]);
- if (phy->radio_ver == 0x2053) {
- b43_phy_write(dev, 0x000A, regstack[2]);
- b43_phy_write(dev, 0x002A, regstack[3]);
- b43_phy_write(dev, 0x0035, regstack[4]);
- b43_phy_write(dev, 0x0003, regstack[5]);
- b43_phy_write(dev, 0x0001, regstack[6]);
- b43_phy_write(dev, 0x0030, regstack[7]);
-
- b43_radio_write16(dev, 0x0043, regstack[8]);
- b43_radio_write16(dev, 0x007A, regstack[9]);
-
- b43_radio_write16(dev, 0x0052,
- (b43_radio_read16(dev, 0x0052) & 0x000F)
- | regstack[11]);
-
- b43_write16(dev, 0x03EC, regstack[10]);
- }
- b43_phy_write(dev, 0x0015, regstack[0]);
-}
-
static u16 lo_measure_feedthrough(struct b43_wldev *dev,
u16 lna, u16 pga, u16 trsw_rx)
{
b43_radio_write16(dev, 0x52, b43_radio_read16(dev, 0x52)
& 0xFFF0); /* TX bias == 0 */
}
+ lo->txctl_measured_time = jiffies;
}
static void lo_read_power_vector(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
struct b43_txpower_lo_control *lo = phy->lo_control;
- u16 i;
+ int i;
u64 tmp;
u64 power_vector = 0;
- int rf_offset, bb_offset;
- struct b43_loctl *loctl;
for (i = 0; i < 8; i += 2) {
tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x310 + i);
- /* Clear the top byte. We get holes in the bitmap... */
- tmp &= 0xFF;
power_vector |= (tmp << (i * 8));
/* Clear the vector on the device. */
b43_shm_write16(dev, B43_SHM_SHARED, 0x310 + i, 0);
}
-
if (power_vector)
lo->power_vector = power_vector;
- power_vector = lo->power_vector;
-
- for (i = 0; i < 64; i++) {
- if (power_vector & ((u64) 1ULL << i)) {
- /* Now figure out which b43_loctl corresponds
- * to this bit.
- */
- rf_offset = i / lo->rfatt_list.len;
- bb_offset = i % lo->rfatt_list.len; //FIXME?
- loctl =
- b43_get_lo_g_ctl(dev,
- &lo->rfatt_list.list[rf_offset],
- &lo->bbatt_list.list[bb_offset]);
- /* And mark it as "used", as the device told us
- * through the bitmap it is using it.
- */
- loctl->used = 1;
- }
- }
+ lo->pwr_vec_read_time = jiffies;
}
/* 802.11/LO/GPHY/MeasuringGains */
b43_phy_write(dev, B43_PHY_CCK(0x16), 0x410);
b43_phy_write(dev, B43_PHY_CCK(0x17), 0x820);
}
- if (!lo->rebuild && b43_has_hardware_pctl(phy))
- lo_read_power_vector(dev);
if (phy->rev >= 2) {
sav->phy_analogover = b43_phy_read(dev, B43_PHY_ANALOGOVER);
sav->phy_analogoverval =
b43_radio_read16(dev, 0x51); /* dummy read */
if (phy->type == B43_PHYTYPE_G)
b43_phy_write(dev, B43_PHY_CCK(0x2F), 0);
- if (lo->rebuild)
+
+ /* Re-measure the txctl values, if needed. */
+ if (time_before(lo->txctl_measured_time,
+ jiffies - B43_LO_TXCTL_EXPIRE))
lo_measure_txctl_values(dev);
+
if (phy->type == B43_PHYTYPE_G && phy->rev >= 3) {
b43_phy_write(dev, B43_PHY_LO_MASK, 0xC078);
} else {
struct lo_g_saved_values *sav)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
u16 tmp;
if (phy->rev >= 2) {
tmp = (phy->pga_gain | 0xEFA0);
b43_phy_write(dev, B43_PHY_PGACTL, tmp);
}
- if (b43_has_hardware_pctl(phy)) {
- b43_gphy_dc_lt_init(dev);
- } else {
- if (lo->rebuild)
- b43_lo_g_adjust_to(dev, 3, 2, 0);
- else
- b43_lo_g_adjust(dev);
- }
if (phy->type == B43_PHYTYPE_G) {
if (phy->rev >= 3)
b43_phy_write(dev, B43_PHY_CCK(0x2E), 0xC078);
struct b43_lo_g_statemachine *d)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_loctl test_loctl;
struct b43_loctl orig_loctl;
struct b43_loctl prev_loctl = {
found_lower = 1;
d->lowest_feedth = feedth;
if ((d->nr_measured < 2) &&
- (!has_loopback_gain(phy) || lo->rebuild))
+ !has_loopback_gain(phy))
break;
}
}
int *max_rx_gain)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_lo_g_statemachine d;
u16 feedth;
int found_lower;
d.nr_measured = 0;
d.state_val_multiplier = 1;
- if (has_loopback_gain(phy) && !lo->rebuild)
+ if (has_loopback_gain(phy))
d.state_val_multiplier = 3;
memcpy(&d.min_loctl, loctl, sizeof(struct b43_loctl));
- if (has_loopback_gain(phy) && lo->rebuild)
+ if (has_loopback_gain(phy))
max_repeat = 4;
do {
b43_lo_write(dev, &d.min_loctl);
feedth = lo_measure_feedthrough(dev, phy->lna_gain,
phy->pga_gain,
phy->trsw_rx_gain);
- if (!lo->rebuild && feedth < 0x258) {
+ if (feedth < 0x258) {
if (feedth >= 0x12C)
*max_rx_gain += 6;
else
} while (++repeat_cnt < max_repeat);
}
-#if B43_CALIB_ALL_LOCTLS
-static const struct b43_rfatt b43_full_rfatt_list_items[] = {
- { .att = 0, .with_padmix = 0, },
- { .att = 1, .with_padmix = 0, },
- { .att = 2, .with_padmix = 0, },
- { .att = 3, .with_padmix = 0, },
- { .att = 4, .with_padmix = 0, },
- { .att = 5, .with_padmix = 0, },
- { .att = 6, .with_padmix = 0, },
- { .att = 7, .with_padmix = 0, },
- { .att = 8, .with_padmix = 0, },
- { .att = 9, .with_padmix = 0, },
- { .att = 10, .with_padmix = 0, },
- { .att = 11, .with_padmix = 0, },
- { .att = 12, .with_padmix = 0, },
- { .att = 13, .with_padmix = 0, },
- { .att = 14, .with_padmix = 0, },
- { .att = 15, .with_padmix = 0, },
- { .att = 0, .with_padmix = 1, },
- { .att = 1, .with_padmix = 1, },
- { .att = 2, .with_padmix = 1, },
- { .att = 3, .with_padmix = 1, },
- { .att = 4, .with_padmix = 1, },
- { .att = 5, .with_padmix = 1, },
- { .att = 6, .with_padmix = 1, },
- { .att = 7, .with_padmix = 1, },
- { .att = 8, .with_padmix = 1, },
- { .att = 9, .with_padmix = 1, },
- { .att = 10, .with_padmix = 1, },
- { .att = 11, .with_padmix = 1, },
- { .att = 12, .with_padmix = 1, },
- { .att = 13, .with_padmix = 1, },
- { .att = 14, .with_padmix = 1, },
- { .att = 15, .with_padmix = 1, },
-};
-static const struct b43_rfatt_list b43_full_rfatt_list = {
- .list = b43_full_rfatt_list_items,
- .len = ARRAY_SIZE(b43_full_rfatt_list_items),
-};
-
-static const struct b43_bbatt b43_full_bbatt_list_items[] = {
- { .att = 0, },
- { .att = 1, },
- { .att = 2, },
- { .att = 3, },
- { .att = 4, },
- { .att = 5, },
- { .att = 6, },
- { .att = 7, },
- { .att = 8, },
- { .att = 9, },
- { .att = 10, },
- { .att = 11, },
-};
-static const struct b43_bbatt_list b43_full_bbatt_list = {
- .list = b43_full_bbatt_list_items,
- .len = ARRAY_SIZE(b43_full_bbatt_list_items),
-};
-#endif /* B43_CALIB_ALL_LOCTLS */
-
-static void lo_measure(struct b43_wldev *dev)
+static
+struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
struct b43_loctl loctl = {
.i = 0,
.q = 0,
};
- struct b43_loctl *ploctl;
int max_rx_gain;
- int rfidx, bbidx;
- const struct b43_bbatt_list *bbatt_list;
- const struct b43_rfatt_list *rfatt_list;
-
+ struct b43_lo_calib *cal;
+ struct lo_g_saved_values uninitialized_var(saved_regs);
/* Values from the "TXCTL Register and Value Table" */
u16 txctl_reg;
u16 txctl_value;
u16 pad_mix_gain;
- bbatt_list = &lo->bbatt_list;
- rfatt_list = &lo->rfatt_list;
-#if B43_CALIB_ALL_LOCTLS
- bbatt_list = &b43_full_bbatt_list;
- rfatt_list = &b43_full_rfatt_list;
-#endif
+ saved_regs.old_channel = phy->channel;
+ b43_mac_suspend(dev);
+ lo_measure_setup(dev, &saved_regs);
txctl_reg = lo_txctl_register_table(dev, &txctl_value, &pad_mix_gain);
- for (rfidx = 0; rfidx < rfatt_list->len; rfidx++) {
-
- b43_radio_write16(dev, 0x43, (b43_radio_read16(dev, 0x43)
- & 0xFFF0) |
- rfatt_list->list[rfidx].att);
- b43_radio_write16(dev, txctl_reg,
- (b43_radio_read16(dev, txctl_reg)
- & ~txctl_value)
- | (rfatt_list->list[rfidx].with_padmix ?
- txctl_value : 0));
-
- for (bbidx = 0; bbidx < bbatt_list->len; bbidx++) {
- if (lo->rebuild) {
-#if B43_CALIB_ALL_LOCTLS
- ploctl = b43_get_lo_g_ctl(dev,
- &rfatt_list->list[rfidx],
- &bbatt_list->list[bbidx]);
-#else
- ploctl = b43_get_lo_g_ctl_nopadmix(dev,
- &rfatt_list->
- list[rfidx],
- &bbatt_list->
- list[bbidx]);
-#endif
- } else {
- ploctl = b43_get_lo_g_ctl(dev,
- &rfatt_list->list[rfidx],
- &bbatt_list->list[bbidx]);
- if (!ploctl->used)
- continue;
- }
- memcpy(&loctl, ploctl, sizeof(loctl));
- loctl.i = 0;
- loctl.q = 0;
-
- max_rx_gain = rfatt_list->list[rfidx].att * 2;
- max_rx_gain += bbatt_list->list[bbidx].att / 2;
- if (rfatt_list->list[rfidx].with_padmix)
- max_rx_gain -= pad_mix_gain;
- if (has_loopback_gain(phy))
- max_rx_gain += phy->max_lb_gain;
- lo_measure_gain_values(dev, max_rx_gain,
- has_loopback_gain(phy));
-
- b43_phy_set_baseband_attenuation(dev,
- bbatt_list->list[bbidx].att);
- lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
- if (phy->type == B43_PHYTYPE_B) {
- loctl.i++;
- loctl.q++;
- }
- b43_loctl_set_calibrated(&loctl, 1);
- memcpy(ploctl, &loctl, sizeof(loctl));
- }
- }
-}
-
-#if B43_DEBUG
-static void do_validate_loctl(struct b43_wldev *dev, struct b43_loctl *control)
-{
- const int is_initializing = (b43_status(dev) == B43_STAT_UNINIT);
- int i = control->i;
- int q = control->q;
+ b43_radio_write16(dev, 0x43,
+ (b43_radio_read16(dev, 0x43) & 0xFFF0)
+ | rfatt->att);
+ b43_radio_write16(dev, txctl_reg,
+ (b43_radio_read16(dev, txctl_reg) & ~txctl_value)
+ | (rfatt->with_padmix) ? txctl_value : 0);
- if (b43_loctl_is_calibrated(control)) {
- if ((abs(i) > 16) || (abs(q) > 16))
- goto error;
- } else {
- if (control->used)
- goto error;
- if (dev->phy.lo_control->rebuild) {
- control->i = 0;
- control->q = 0;
- if ((i != B43_LOCTL_POISON) ||
- (q != B43_LOCTL_POISON))
- goto error;
- }
+ max_rx_gain = rfatt->att * 2;
+ max_rx_gain += bbatt->att / 2;
+ if (rfatt->with_padmix)
+ max_rx_gain -= pad_mix_gain;
+ if (has_loopback_gain(phy))
+ max_rx_gain += phy->max_lb_gain;
+ lo_measure_gain_values(dev, max_rx_gain,
+ has_loopback_gain(phy));
+
+ b43_phy_set_baseband_attenuation(dev, bbatt->att);
+ lo_probe_loctls_statemachine(dev, &loctl, &max_rx_gain);
+
+ lo_measure_restore(dev, &saved_regs);
+ b43_mac_enable(dev);
+
+ if (b43_debug(dev, B43_DBG_LO)) {
+ b43dbg(dev->wl, "LO: Calibrated for BB(%u), RF(%u,%u) "
+ "=> I=%d Q=%d\n",
+ bbatt->att, rfatt->att, rfatt->with_padmix,
+ loctl.i, loctl.q);
}
- if (is_initializing && control->used)
- goto error;
-
- return;
-error:
- b43err(dev->wl, "LO control pair validation failed "
- "(I: %d, Q: %d, used %u, calib: %u, initing: %d)\n",
- i, q, control->used,
- b43_loctl_is_calibrated(control),
- is_initializing);
-}
-static void validate_all_loctls(struct b43_wldev *dev)
-{
- b43_call_for_each_loctl(dev, do_validate_loctl);
-}
-
-static void do_reset_calib(struct b43_wldev *dev, struct b43_loctl *control)
-{
- if (dev->phy.lo_control->rebuild ||
- control->used) {
- b43_loctl_set_calibrated(control, 0);
- control->i = B43_LOCTL_POISON;
- control->q = B43_LOCTL_POISON;
+ cal = kmalloc(sizeof(*cal), GFP_KERNEL);
+ if (!cal) {
+ b43warn(dev->wl, "LO calib: out of memory\n");
+ return NULL;
}
+ memcpy(&cal->bbatt, bbatt, sizeof(*bbatt));
+ memcpy(&cal->rfatt, rfatt, sizeof(*rfatt));
+ memcpy(&cal->ctl, &loctl, sizeof(loctl));
+ cal->calib_time = jiffies;
+ INIT_LIST_HEAD(&cal->list);
+
+ return cal;
}
-static void reset_all_loctl_calibration_states(struct b43_wldev *dev)
+/* Get a calibrated LO setting for the given attenuation values.
+ * Might return a NULL pointer under OOM! */
+static
+struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
- b43_call_for_each_loctl(dev, do_reset_calib);
+ struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_lo_calib *c;
+
+ c = b43_find_lo_calib(lo, bbatt, rfatt);
+ if (c)
+ return c;
+ /* Not in the list of calibrated LO settings.
+ * Calibrate it now. */
+ c = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+ if (!c)
+ return NULL;
+ list_add(&c->list, &lo->calib_list);
+
+ return c;
}
-#else /* B43_DEBUG */
-static inline void validate_all_loctls(struct b43_wldev *dev) { }
-static inline void reset_all_loctl_calibration_states(struct b43_wldev *dev) { }
-#endif /* B43_DEBUG */
-
-void b43_lo_g_measure(struct b43_wldev *dev)
+void b43_gphy_dc_lt_init(struct b43_wldev *dev, bool update_all)
{
struct b43_phy *phy = &dev->phy;
- struct lo_g_saved_values uninitialized_var(sav);
-
- B43_WARN_ON((phy->type != B43_PHYTYPE_B) &&
- (phy->type != B43_PHYTYPE_G));
-
- sav.old_channel = phy->channel;
- lo_measure_setup(dev, &sav);
- reset_all_loctl_calibration_states(dev);
- lo_measure(dev);
- lo_measure_restore(dev, &sav);
-
- validate_all_loctls(dev);
+ struct b43_txpower_lo_control *lo = phy->lo_control;
+ int i;
+ int rf_offset, bb_offset;
+ const struct b43_rfatt *rfatt;
+ const struct b43_bbatt *bbatt;
+ u64 power_vector;
+ bool table_changed = 0;
- phy->lo_control->lo_measured = 1;
- phy->lo_control->rebuild = 0;
-}
+ BUILD_BUG_ON(B43_DC_LT_SIZE != 32);
+ B43_WARN_ON(lo->rfatt_list.len * lo->bbatt_list.len > 64);
-#if B43_DEBUG
-static void validate_loctl_calibration(struct b43_wldev *dev,
- struct b43_loctl *loctl,
- struct b43_rfatt *rfatt,
- struct b43_bbatt *bbatt)
-{
- if (b43_loctl_is_calibrated(loctl))
- return;
- if (!dev->phy.lo_control->lo_measured) {
- /* On init we set the attenuation values before we
- * calibrated the LO. I guess that's OK. */
- return;
+ power_vector = lo->power_vector;
+ if (!update_all && !power_vector)
+ return; /* Nothing to do. */
+
+ /* Suspend the MAC now to avoid continuous suspend/enable
+ * cycles in the loop. */
+ b43_mac_suspend(dev);
+
+ for (i = 0; i < B43_DC_LT_SIZE * 2; i++) {
+ struct b43_lo_calib *cal;
+ int idx;
+ u16 val;
+
+ if (!update_all && !(power_vector & (((u64)1ULL) << i)))
+ continue;
+ /* Update the table entry for this power_vector bit.
+ * The table rows are RFatt entries and columns are BBatt. */
+ bb_offset = i / lo->rfatt_list.len;
+ rf_offset = i % lo->rfatt_list.len;
+ bbatt = &(lo->bbatt_list.list[bb_offset]);
+ rfatt = &(lo->rfatt_list.list[rf_offset]);
+
+ cal = b43_calibrate_lo_setting(dev, bbatt, rfatt);
+ if (!cal) {
+ b43warn(dev->wl, "LO: Could not "
+ "calibrate DC table entry\n");
+ continue;
+ }
+ /*FIXME: Is Q really in the low nibble? */
+ val = (u8)(cal->ctl.q);
+ val |= ((u8)(cal->ctl.i)) << 4;
+ kfree(cal);
+
+ /* Get the index into the hardware DC LT. */
+ idx = i / 2;
+ /* Change the table in memory. */
+ if (i % 2) {
+ /* Change the high byte. */
+ lo->dc_lt[idx] = (lo->dc_lt[idx] & 0x00FF)
+ | ((val & 0x00FF) << 8);
+ } else {
+ /* Change the low byte. */
+ lo->dc_lt[idx] = (lo->dc_lt[idx] & 0xFF00)
+ | (val & 0x00FF);
+ }
+ table_changed = 1;
}
- b43err(dev->wl, "Adjusting Local Oscillator to an uncalibrated "
- "control pair: rfatt=%u,%spadmix bbatt=%u\n",
- rfatt->att,
- (rfatt->with_padmix) ? "" : "no-",
- bbatt->att);
-}
-#else
-static inline void validate_loctl_calibration(struct b43_wldev *dev,
- struct b43_loctl *loctl,
- struct b43_rfatt *rfatt,
- struct b43_bbatt *bbatt)
-{
+ if (table_changed) {
+ /* The table changed in memory. Update the hardware table. */
+ for (i = 0; i < B43_DC_LT_SIZE; i++)
+ b43_phy_write(dev, 0x3A0 + i, lo->dc_lt[i]);
+ }
+ b43_mac_enable(dev);
}
-#endif
-static inline void fixup_rfatt_for_txcontrol(struct b43_rfatt *rf,
- u8 tx_control)
+/* Fixup the RF attenuation value for the case where we are
+ * using the PAD mixer. */
+static inline void b43_lo_fixup_rfatt(struct b43_rfatt *rf)
{
- if (tx_control & B43_TXCTL_TXMIX) {
- if (rf->att < 5)
- rf->att = 4;
- }
+ if (!rf->with_padmix)
+ return;
+ if ((rf->att != 1) && (rf->att != 2) && (rf->att != 3))
+ rf->att = 4;
}
void b43_lo_g_adjust(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
+ struct b43_lo_calib *cal;
struct b43_rfatt rf;
- struct b43_loctl *loctl;
memcpy(&rf, &phy->rfatt, sizeof(rf));
- fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
+ b43_lo_fixup_rfatt(&rf);
- loctl = b43_get_lo_g_ctl(dev, &rf, &phy->bbatt);
- validate_loctl_calibration(dev, loctl, &rf, &phy->bbatt);
- b43_lo_write(dev, loctl);
+ cal = b43_get_calib_lo_settings(dev, &phy->bbatt, &rf);
+ if (!cal)
+ return;
+ b43_lo_write(dev, &cal->ctl);
}
void b43_lo_g_adjust_to(struct b43_wldev *dev,
{
struct b43_rfatt rf;
struct b43_bbatt bb;
- struct b43_loctl *loctl;
+ struct b43_lo_calib *cal;
memset(&rf, 0, sizeof(rf));
memset(&bb, 0, sizeof(bb));
rf.att = rfatt;
bb.att = bbatt;
- fixup_rfatt_for_txcontrol(&rf, tx_control);
- loctl = b43_get_lo_g_ctl(dev, &rf, &bb);
- validate_loctl_calibration(dev, loctl, &rf, &bb);
- b43_lo_write(dev, loctl);
+ b43_lo_fixup_rfatt(&rf);
+ cal = b43_get_calib_lo_settings(dev, &bb, &rf);
+ if (!cal)
+ return;
+ b43_lo_write(dev, &cal->ctl);
}
-static void do_mark_unused(struct b43_wldev *dev, struct b43_loctl *control)
+/* Periodic LO maintanance work */
+void b43_lo_g_maintanance_work(struct b43_wldev *dev)
{
- control->used = 0;
+ struct b43_phy *phy = &dev->phy;
+ struct b43_txpower_lo_control *lo = phy->lo_control;
+ unsigned long now;
+ unsigned long expire;
+ struct b43_lo_calib *cal, *tmp;
+ bool current_item_expired = 0;
+ bool hwpctl;
+
+ if (!lo)
+ return;
+ now = jiffies;
+ hwpctl = b43_has_hardware_pctl(phy);
+
+ if (hwpctl) {
+ /* Read the power vector and update it, if needed. */
+ expire = now - B43_LO_PWRVEC_EXPIRE;
+ if (time_before(lo->pwr_vec_read_time, expire)) {
+ lo_read_power_vector(dev);
+ b43_gphy_dc_lt_init(dev, 0);
+ }
+ //FIXME Recalc the whole DC table from time to time?
+ }
+
+ if (hwpctl)
+ return;
+ /* Search for expired LO settings. Remove them.
+ * Recalibrate the current setting, if expired. */
+ expire = now - B43_LO_CALIB_EXPIRE;
+ list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+ if (!time_before(cal->calib_time, expire))
+ continue;
+ /* This item expired. */
+ if (b43_compare_bbatt(&cal->bbatt, &phy->bbatt) &&
+ b43_compare_rfatt(&cal->rfatt, &phy->rfatt)) {
+ B43_WARN_ON(current_item_expired);
+ current_item_expired = 1;
+ }
+ if (b43_debug(dev, B43_DBG_LO)) {
+ b43dbg(dev->wl, "LO: Item BB(%u), RF(%u,%u), "
+ "I=%d, Q=%d expired\n",
+ cal->bbatt.att, cal->rfatt.att,
+ cal->rfatt.with_padmix,
+ cal->ctl.i, cal->ctl.q);
+ }
+ list_del(&cal->list);
+ kfree(cal);
+ }
+ if (current_item_expired || unlikely(list_empty(&lo->calib_list))) {
+ /* Recalibrate currently used LO setting. */
+ if (b43_debug(dev, B43_DBG_LO))
+ b43dbg(dev->wl, "LO: Recalibrating current LO setting\n");
+ cal = b43_calibrate_lo_setting(dev, &phy->bbatt, &phy->rfatt);
+ if (cal) {
+ list_add(&cal->list, &lo->calib_list);
+ b43_lo_write(dev, &cal->ctl);
+ } else
+ b43warn(dev->wl, "Failed to recalibrate current LO setting\n");
+ }
}
-void b43_lo_g_ctl_mark_all_unused(struct b43_wldev *dev)
+void b43_lo_g_cleanup(struct b43_wldev *dev)
{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
+ struct b43_txpower_lo_control *lo = dev->phy.lo_control;
+ struct b43_lo_calib *cal, *tmp;
- b43_call_for_each_loctl(dev, do_mark_unused);
- lo->rebuild = 1;
+ if (!lo)
+ return;
+ list_for_each_entry_safe(cal, tmp, &lo->calib_list, list) {
+ list_del(&cal->list);
+ kfree(cal);
+ }
}
-void b43_lo_g_ctl_mark_cur_used(struct b43_wldev *dev)
+/* LO Initialization */
+void b43_lo_g_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
- struct b43_rfatt rf;
- memcpy(&rf, &phy->rfatt, sizeof(rf));
- fixup_rfatt_for_txcontrol(&rf, phy->tx_control);
-
- b43_get_lo_g_ctl(dev, &rf, &phy->bbatt)->used = 1;
+ if (b43_has_hardware_pctl(phy)) {
+ lo_read_power_vector(dev);
+ b43_gphy_dc_lt_init(dev, 1);
+ }
}
{.att = 9,.with_padmix = 1,},
};
- if ((phy->type == B43_PHYTYPE_A && phy->rev < 5) ||
- (phy->type == B43_PHYTYPE_G && phy->rev < 6)) {
+ if (!b43_has_hardware_pctl(phy)) {
/* Software pctl */
list->list = rfatt_0;
list->len = ARRAY_SIZE(rfatt_0);
/* Hardware pctl */
list->list = rfatt_1;
list->len = ARRAY_SIZE(rfatt_1);
- list->min_val = 2;
+ list->min_val = 0;
list->max_val = 14;
return;
}
/* Save the values for later */
phy->tx_control = tx_control;
memcpy(&phy->rfatt, rfatt, sizeof(*rfatt));
+ phy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX);
memcpy(&phy->bbatt, bbatt, sizeof(*bbatt));
if (b43_debug(dev, B43_DBG_XMITPOWER)) {
u16 tmp;
u8 rf, bb;
- if (!lo->lo_measured) {
- b43_phy_write(dev, 0x3FF, 0);
- return;
- }
-
for (rf = 0; rf < lo->rfatt_list.len; rf++) {
for (bb = 0; bb < lo->bbatt_list.len; bb++) {
if (nr_written >= 0x40)
}
}
-/* GPHY_DC_Lookup_Table */
-void b43_gphy_dc_lt_init(struct b43_wldev *dev)
-{
- struct b43_phy *phy = &dev->phy;
- struct b43_txpower_lo_control *lo = phy->lo_control;
- struct b43_loctl *loctl0;
- struct b43_loctl *loctl1;
- int i;
- int rf_offset, bb_offset;
- u16 tmp;
-
- for (i = 0; i < lo->rfatt_list.len + lo->bbatt_list.len; i += 2) {
- rf_offset = i / lo->rfatt_list.len;
- bb_offset = i % lo->rfatt_list.len;
-
- loctl0 = b43_get_lo_g_ctl(dev, &lo->rfatt_list.list[rf_offset],
- &lo->bbatt_list.list[bb_offset]);
- if (i + 1 < lo->rfatt_list.len * lo->bbatt_list.len) {
- rf_offset = (i + 1) / lo->rfatt_list.len;
- bb_offset = (i + 1) % lo->rfatt_list.len;
-
- loctl1 =
- b43_get_lo_g_ctl(dev,
- &lo->rfatt_list.list[rf_offset],
- &lo->bbatt_list.list[bb_offset]);
- } else
- loctl1 = loctl0;
-
- tmp = ((u16) loctl0->q & 0xF);
- tmp |= ((u16) loctl0->i & 0xF) << 4;
- tmp |= ((u16) loctl1->q & 0xF) << 8;
- tmp |= ((u16) loctl1->i & 0xF) << 12; //FIXME?
- b43_phy_write(dev, 0x3A0 + (i / 2), tmp);
- }
-}
-
static void hardware_pctl_init_aphy(struct b43_wldev *dev)
{
//TODO
b43_phy_write(dev, 0x0801, b43_phy_read(dev, 0x0801)
& 0xFFBF);
- b43_gphy_dc_lt_init(dev);
+ b43_gphy_dc_lt_init(dev, 1);
}
/* HardwarePowerControl init for A and G PHY */
b43_phy_write(dev, 0x0032, 0x00CA);
b43_phy_write(dev, 0x0032, 0x00CC);
b43_phy_write(dev, 0x0035, 0x07C2);
- b43_lo_b_measure(dev);
+//XXX won't trigger b43_lo_b_measure(dev);
b43_phy_write(dev, 0x0026, 0xCC00);
if (phy->radio_ver != 0x2050)
b43_phy_write(dev, 0x0026, 0xCE00);
b43_phy_write(dev, 0x0032, 0x00E0);
b43_phy_write(dev, 0x0035, 0x07C2);
- b43_lo_b_measure(dev);
+//XXX won't trigger b43_lo_b_measure(dev);
b43_phy_write(dev, 0x0026, 0xCC00);
if (phy->radio_ver == 0x2050)
b43_phy_write(dev, 0x0002, (b43_phy_read(dev, 0x0002) & 0xFFC0)
| 0x0004);
}
- if (phy->type == B43_PHYTYPE_B) {
- b43_write16(dev, 0x03E6, 0x8140);
- b43_phy_write(dev, 0x0016, 0x0410);
- b43_phy_write(dev, 0x0017, 0x0820);
- b43_phy_write(dev, 0x0062, 0x0007);
- b43_radio_init2050(dev);
- b43_lo_g_measure(dev);
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
- b43_calc_nrssi_slope(dev);
- b43_calc_nrssi_threshold(dev);
- }
- b43_phy_init_pctl(dev);
- } else if (phy->type == B43_PHYTYPE_G)
+ if (phy->type == B43_PHYTYPE_B)
+ B43_WARN_ON(1);
+ else if (phy->type == B43_PHYTYPE_G)
b43_write16(dev, 0x03E6, 0x0);
}
else
b43_radio_write16(dev, 0x0078, phy->initval);
}
- if (phy->lo_control->tx_bias == 0xFF) {
- b43_lo_g_measure(dev);
+ b43_lo_g_init(dev);
+ if (has_tx_magnification(phy)) {
+ b43_radio_write16(dev, 0x52,
+ (b43_radio_read16(dev, 0x52) & 0xFF00)
+ | phy->lo_control->tx_bias | phy->
+ lo_control->tx_magn);
} else {
- if (has_tx_magnification(phy)) {
- b43_radio_write16(dev, 0x52,
- (b43_radio_read16(dev, 0x52) & 0xFF00)
- | phy->lo_control->tx_bias | phy->
- lo_control->tx_magn);
- } else {
- b43_radio_write16(dev, 0x52,
- (b43_radio_read16(dev, 0x52) & 0xFFF0)
- | phy->lo_control->tx_bias);
- }
- if (phy->rev >= 6) {
- b43_phy_write(dev, B43_PHY_CCK(0x36),
- (b43_phy_read(dev, B43_PHY_CCK(0x36))
- & 0x0FFF) | (phy->lo_control->
- tx_bias << 12));
- }
- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
- b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
- else
- b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
- if (phy->rev < 2)
- b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101);
- else
- b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202);
+ b43_radio_write16(dev, 0x52,
+ (b43_radio_read16(dev, 0x52) & 0xFFF0)
+ | phy->lo_control->tx_bias);
}
+ if (phy->rev >= 6) {
+ b43_phy_write(dev, B43_PHY_CCK(0x36),
+ (b43_phy_read(dev, B43_PHY_CCK(0x36))
+ & 0x0FFF) | (phy->lo_control->
+ tx_bias << 12));
+ }
+ if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
+ else
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
+ if (phy->rev < 2)
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x101);
+ else
+ b43_phy_write(dev, B43_PHY_CCK(0x2F), 0x202);
if (phy->gmode || phy->rev >= 2) {
b43_lo_g_adjust(dev);
b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
bbatt_delta -= 4 * rfatt_delta;
/* So do we finally need to adjust something? */
- if ((rfatt_delta == 0) && (bbatt_delta == 0)) {
- b43_lo_g_ctl_mark_cur_used(dev);
+ if ((rfatt_delta == 0) && (bbatt_delta == 0))
return;
- }
/* Calculate the new attenuation values. */
bbatt = phy->bbatt.att;
b43_radio_lock(dev);
b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt,
phy->tx_control);
- b43_lo_g_ctl_mark_cur_used(dev);
b43_radio_unlock(dev);
b43_phy_unlock(dev);
break;
projects / linux-2.6-omap-h63xx.git / commitdiff