Revert "input: add more error checks to lm8323 driver"

This reverts commit c0c5beb86fe59cafd2c61a0797f94980056e33c0.

This patch breaks n810 keyboard.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 3d10a0fea6191396084ef03cb056680833b2e247..72bb587eb035adca819363047f527c62baa1c915 100644 (file)
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -348,10 +348,10 @@ static void lm8323_process_error(struct lm8323_chip *lm)
        }
 }
 
-static int lm8323_reset(struct lm8323_chip *lm)
+static void lm8323_reset(struct lm8323_chip *lm)
 {
        /* The docs say we must pass 0xAA as the data byte. */
-       return lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
+       lm8323_write(lm, 2, LM8323_CMD_RESET, 0xAA);
 }
 
 static int lm8323_configure(struct lm8323_chip *lm)
@@ -360,7 +360,6 @@ static int lm8323_configure(struct lm8323_chip *lm)
        int clock = (CLK_SLOWCLKEN | CLK_RCPWM_EXTERNAL);
        int debounce = lm->debounce_time >> 2;
        int active = lm->active_time >> 2;
-       int ret;
 
        /*
         * Active time must be greater than the debounce time: if it's
@@ -369,25 +368,13 @@ static int lm8323_configure(struct lm8323_chip *lm)
        if (debounce >= active)
                active = debounce + 3;
 
-       ret = lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
-       if (ret)
-               goto err;
-       ret = lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
-       if (ret)
-               goto err;
-       ret = lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
-       if (ret)
-               goto err;
+       lm8323_write(lm, 2, LM8323_CMD_WRITE_CFG, 0);
+       lm8323_write(lm, 2, LM8323_CMD_WRITE_CLOCK, clock);
+       lm8323_write(lm, 2, LM8323_CMD_SET_KEY_SIZE, keysize);
        lm8323_set_active_time(lm, lm->active_time);
-       ret = lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
-       if (ret)
-               goto err;
-       ret = lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
-       if (ret)
-               goto err;
-       ret = lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
-       if (ret)
-               goto err;
+       lm8323_write(lm, 2, LM8323_CMD_SET_DEBOUNCE, debounce);
+       lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_STATE, 0xff, 0xff);
+       lm8323_write(lm, 3, LM8323_CMD_WRITE_PORT_SEL, 0, 0);
 
        /*
         * Not much we can do about errors at this point, so just hope
@@ -395,11 +382,6 @@ static int lm8323_configure(struct lm8323_chip *lm)
         */
 
        return 0;
-
-err:
-       dev_err(&lm->client->dev, "failed to configure lm8323\n");
-
-       return ret;
 }
 
 /*
@@ -739,9 +721,7 @@ static int lm8323_probe(struct i2c_client *client,
        else if (lm->active_time == -1) /* Disable sleep. */
                lm->active_time = 0;
 
-       err = lm8323_reset(lm);
-       if (err)
-               goto fail2;
+       lm8323_reset(lm);
 
        /* Nothing's set up to service the IRQ yet, so just spin for max.
         * 100ms until we can configure. */
@@ -758,9 +738,7 @@ static int lm8323_probe(struct i2c_client *client,
 
                msleep(1);
        }
-       err = lm8323_configure(lm);
-       if (err)
-               goto fail2;
+       lm8323_configure(lm);
 
        /* If a true probe check the device */
        if (lm8323_read_id(lm, data) != 0) {