select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
- select RTAS_FW
default y
config PPC_CHRP
bool " Cell Broadband Processor Architecture"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_RTAS
- select RTAS_FW
select MMIO_NVRAM
config PPC_OF
depends on PPC_RTAS
default n
-config RTAS_FW
- bool
+config RTAS_PROC
+ bool "Proc interface to RTAS"
depends on PPC_RTAS
- default n
+ default y
+
+config RTAS_FLASH
+ tristate "Firmware flash interface"
+ depends on PPC64 && RTAS_PROC
config MMIO_NVRAM
bool
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
obj-$(CONFIG_PPC_RTAS) += rtas.o
-obj-$(CONFIG_RTAS_FW) += rtas_fw.o
+obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
+obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_IBMVIO) += vio.o
ifeq ($(CONFIG_PPC_MERGE),y)
char rtas_data_buf[RTAS_DATA_BUF_SIZE] __cacheline_aligned;
unsigned long rtas_rmo_buf;
+/*
+ * If non-NULL, this gets called when the kernel terminates.
+ * This is done like this so rtas_flash can be a module.
+ */
+void (*rtas_flash_term_hook)(int);
+EXPORT_SYMBOL(rtas_flash_term_hook);
+
/*
* call_rtas_display_status and call_rtas_display_status_delay
* are designed only for very early low-level debugging, which
spin_unlock(&progress_lock);
}
+EXPORT_SYMBOL(rtas_progress); /* needed by rtas_flash module */
int rtas_token(const char *service)
{
void rtas_restart(char *cmd)
{
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_RESTART);
printk("RTAS system-reboot returned %d\n",
rtas_call(rtas_token("system-reboot"), 0, 1, NULL));
for (;;);
void rtas_power_off(void)
{
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_POWER_OFF);
/* allow power on only with power button press */
printk("RTAS power-off returned %d\n",
rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
void rtas_halt(void)
{
- rtas_power_off();
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_HALT);
+ /* allow power on only with power button press */
+ printk("RTAS power-off returned %d\n",
+ rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1));
+ for (;;);
}
/* Must be in the RMO region, so we place it here */
#include <asm/delay.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
+#include <asm/abs_addr.h>
#define MODULE_VERS "1.0"
#define MODULE_NAME "rtas_flash"
#define VALIDATE_BUF_SIZE 4096
#define RTAS_MSG_MAXLEN 64
+struct flash_block {
+ char *data;
+ unsigned long length;
+};
+
+/* This struct is very similar but not identical to
+ * that needed by the rtas flash update.
+ * All we need to do for rtas is rewrite num_blocks
+ * into a version/length and translate the pointers
+ * to absolute.
+ */
+#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
+struct flash_block_list {
+ unsigned long num_blocks;
+ struct flash_block_list *next;
+ struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
+};
+struct flash_block_list_header { /* just the header of flash_block_list */
+ unsigned long num_blocks;
+ struct flash_block_list *next;
+};
+
+static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+
+#define FLASH_BLOCK_LIST_VERSION (1UL)
+
/* Local copy of the flash block list.
* We only allow one open of the flash proc file and create this
- * list as we go. This list will be put in the kernel's
- * rtas_firmware_flash_list global var once it is fully read.
+ * list as we go. This list will be put in the
+ * rtas_firmware_flash_list var once it is fully read.
*
* For convenience as we build the list we use virtual addrs,
* we do not fill in the version number, and the length field
return 0;
}
+static void rtas_flash_firmware(int reboot_type)
+{
+ unsigned long image_size;
+ struct flash_block_list *f, *next, *flist;
+ unsigned long rtas_block_list;
+ int i, status, update_token;
+
+ if (rtas_firmware_flash_list.next == NULL)
+ return; /* nothing to do */
+
+ if (reboot_type != SYS_RESTART) {
+ printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
+ printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
+ return;
+ }
+
+ update_token = rtas_token("ibm,update-flash-64-and-reboot");
+ if (update_token == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot "
+ "is not available -- not a service partition?\n");
+ printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
+ return;
+ }
+
+ /* NOTE: the "first" block list is a global var with no data
+ * blocks in the kernel data segment. We do this because
+ * we want to ensure this block_list addr is under 4GB.
+ */
+ rtas_firmware_flash_list.num_blocks = 0;
+ flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+ rtas_block_list = virt_to_abs(flist);
+ if (rtas_block_list >= 4UL*1024*1024*1024) {
+ printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+ return;
+ }
+
+ printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
+ /* Update the block_list in place. */
+ image_size = 0;
+ for (f = flist; f; f = next) {
+ /* Translate data addrs to absolute */
+ for (i = 0; i < f->num_blocks; i++) {
+ f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+ image_size += f->blocks[i].length;
+ }
+ next = f->next;
+ /* Don't translate NULL pointer for last entry */
+ if (f->next)
+ f->next = (struct flash_block_list *)virt_to_abs(f->next);
+ else
+ f->next = NULL;
+ /* make num_blocks into the version/length field */
+ f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
+ }
+
+ printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
+ printk(KERN_ALERT "FLASH: performing flash and reboot\n");
+ rtas_progress("Flashing \n", 0x0);
+ rtas_progress("Please Wait... ", 0x0);
+ printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
+ status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
+ switch (status) { /* should only get "bad" status */
+ case 0:
+ printk(KERN_ALERT "FLASH: success\n");
+ break;
+ case -1:
+ printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
+ break;
+ case -3:
+ printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
+ break;
+ case -4:
+ printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
+ break;
+ default:
+ printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
+ break;
+ }
+}
+
static void remove_flash_pde(struct proc_dir_entry *dp)
{
if (dp) {
if (rc != 0)
goto cleanup;
+ rtas_flash_term_hook = rtas_flash_firmware;
return 0;
cleanup:
void __exit rtas_flash_cleanup(void)
{
+ rtas_flash_term_hook = NULL;
remove_flash_pde(firmware_flash_pde);
remove_flash_pde(firmware_update_pde);
remove_flash_pde(validate_pde);
+++ /dev/null
-/*
- *
- * Procedures for firmware flash updates.
- *
- * Peter Bergner, IBM March 2001.
- * Copyright (C) 2001 IBM.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <stdarg.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/prom.h>
-#include <asm/rtas.h>
-#include <asm/semaphore.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/param.h>
-#include <asm/system.h>
-#include <asm/abs_addr.h>
-#include <asm/udbg.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-#include <asm/systemcfg.h>
-
-struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
-
-#define FLASH_BLOCK_LIST_VERSION (1UL)
-
-static void rtas_flash_firmware(void)
-{
- unsigned long image_size;
- struct flash_block_list *f, *next, *flist;
- unsigned long rtas_block_list;
- int i, status, update_token;
-
- update_token = rtas_token("ibm,update-flash-64-and-reboot");
- if (update_token == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
- printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
- return;
- }
-
- /* NOTE: the "first" block list is a global var with no data
- * blocks in the kernel data segment. We do this because
- * we want to ensure this block_list addr is under 4GB.
- */
- rtas_firmware_flash_list.num_blocks = 0;
- flist = (struct flash_block_list *)&rtas_firmware_flash_list;
- rtas_block_list = virt_to_abs(flist);
- if (rtas_block_list >= 4UL*1024*1024*1024) {
- printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
- return;
- }
-
- printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
- /* Update the block_list in place. */
- image_size = 0;
- for (f = flist; f; f = next) {
- /* Translate data addrs to absolute */
- for (i = 0; i < f->num_blocks; i++) {
- f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
- image_size += f->blocks[i].length;
- }
- next = f->next;
- /* Don't translate NULL pointer for last entry */
- if (f->next)
- f->next = (struct flash_block_list *)virt_to_abs(f->next);
- else
- f->next = NULL;
- /* make num_blocks into the version/length field */
- f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
- }
-
- printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
- printk(KERN_ALERT "FLASH: performing flash and reboot\n");
- rtas_progress("Flashing \n", 0x0);
- rtas_progress("Please Wait... ", 0x0);
- printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
- status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
- switch (status) { /* should only get "bad" status */
- case 0:
- printk(KERN_ALERT "FLASH: success\n");
- break;
- case -1:
- printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
- break;
- case -3:
- printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
- break;
- case -4:
- printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
- break;
- default:
- printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
- break;
- }
-}
-
-void rtas_flash_bypass_warning(void)
-{
- printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
- printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
-}
-
-
-void rtas_fw_restart(char *cmd)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_firmware();
- rtas_restart(cmd);
-}
-
-void rtas_fw_power_off(void)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_bypass_warning();
- rtas_power_off();
-}
-
-void rtas_fw_halt(void)
-{
- if (rtas_firmware_flash_list.next)
- rtas_flash_bypass_warning();
- rtas_halt();
-}
-
-EXPORT_SYMBOL(rtas_firmware_flash_list);
depends on PPC_PSERIES
default y if !EMBEDDED
-config RTAS_PROC
- bool "Proc interface to RTAS"
- depends on PPC_RTAS
- default y
-
-config RTAS_FLASH
- tristate "Firmware flash interface"
- depends on PPC64 && RTAS_PROC
-
config SCANLOG
tristate "Scanlog dump interface"
depends on RTAS_PROC && PPC_PSERIES
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
- setup.o iommu.o ras.o
+ setup.o iommu.o ras.o rtasd.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_XICS) += xics.o
.pcibios_fixup = pSeries_final_fixup,
.pci_probe_mode = pSeries_pci_probe_mode,
.irq_bus_setup = pSeries_irq_bus_setup,
- .restart = rtas_fw_restart,
- .power_off = rtas_fw_power_off,
- .halt = rtas_fw_halt,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
.panic = rtas_os_term,
.cpu_die = pSeries_mach_cpu_die,
.get_boot_time = rtas_get_boot_time,
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
endif
-obj-$(CONFIG_PPC_PSERIES) += rtasd.o udbg_16550.o
+obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o
obj-$(CONFIG_KEXEC) += machine_kexec.o
obj-$(CONFIG_EEH) += eeh.o
obj-$(CONFIG_PROC_FS) += proc_ppc64.o
-obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_MODULES) += module.o
ifneq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_MODULES) += ppc_ksyms.o
endif
obj-$(CONFIG_PPC_RTAS) += rtas_pci.o
-obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_SCANLOG) += scanlog.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
unsigned char buffer[1];
};
-struct flash_block {
- char *data;
- unsigned long length;
-};
-
-/* This struct is very similar but not identical to
- * that needed by the rtas flash update.
- * All we need to do for rtas is rewrite num_blocks
- * into a version/length and translate the pointers
- * to absolute.
+/*
+ * This can be set by the rtas_flash module so that it can get called
+ * as the absolutely last thing before the kernel terminates.
*/
-#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block))
-struct flash_block_list {
- unsigned long num_blocks;
- struct flash_block_list *next;
- struct flash_block blocks[FLASH_BLOCKS_PER_NODE];
-};
-struct flash_block_list_header { /* just the header of flash_block_list */
- unsigned long num_blocks;
- struct flash_block_list *next;
-};
-extern struct flash_block_list_header rtas_firmware_flash_list;
-void rtas_fw_restart(char *cmd);
-void rtas_fw_power_off(void);
-void rtas_fw_halt(void);
+extern void (*rtas_flash_term_hook)(int);
extern struct rtas_t rtas;
projects / linux-2.6-omap-h63xx.git / commitdiff