]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
Merge branch 'video' into release
authorLen Brown <len.brown@intel.com>
Wed, 12 Nov 2008 02:15:50 +0000 (21:15 -0500)
committerLen Brown <len.brown@intel.com>
Wed, 12 Nov 2008 02:15:50 +0000 (21:15 -0500)
Conflicts:
Documentation/kernel-parameters.txt

Signed-off-by: Len Brown <len.brown@intel.com>
1  2 
Documentation/kernel-parameters.txt
drivers/acpi/Makefile
drivers/acpi/scan.c
drivers/acpi/video.c
drivers/acpi/video_detect.c
drivers/misc/fujitsu-laptop.c
include/linux/acpi.h

index 4782fe7ac7d0dd1095f06fdcff70df4026ccbb8e,dd5013f974d8263b937ace38e5e0424bb4aa0617..c600c4ffc6573a1b8cbf7ae811c31a047dbb1cfc
@@@ -198,30 -198,71 +198,42 @@@ and is between 256 and 4096 characters
                        that require a timer override, but don't have
                        HPET
  
 -      acpi.debug_layer=       [HW,ACPI]
+       acpi_backlight= [HW,ACPI]
+                       acpi_backlight=vendor
+                       acpi_backlight=video
+                       If set to vendor, prefer vendor specific driver
+                       (e.g. thinkpad_acpi, sony_acpi, etc.) instead
+                       of the ACPI video.ko driver.
+       acpi_display_output=    [HW,ACPI]
+                       acpi_display_output=vendor
+                       acpi_display_output=video
+                       See above.
 +      acpi.debug_layer=       [HW,ACPI,ACPI_DEBUG]
 +      acpi.debug_level=       [HW,ACPI,ACPI_DEBUG]
                        Format: <int>
 -                      Each bit of the <int> indicates an ACPI debug layer,
 -                      1: enable, 0: disable. It is useful for boot time
 -                      debugging. After system has booted up, it can be set
 -                      via /sys/module/acpi/parameters/debug_layer.
 -                      CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
 -                      Available bits (add the numbers together) to enable debug output
 -                      for specific parts of the ACPI subsystem:
 -                      0x01 utilities 0x02 hardware 0x04 events 0x08 tables
 -                      0x10 namespace 0x20 parser 0x40 dispatcher
 -                      0x80 executer 0x100 resources 0x200 acpica debugger
 -                      0x400 os services 0x800 acpica disassembler.
 -                      The number can be in decimal or prefixed with 0x in hex.
 -                      Warning: Many of these options can produce a lot of
 -                      output and make your system unusable. Be very careful.
 -
 -      acpi.debug_level=       [HW,ACPI]
 -                      Format: <int>
 -                      Each bit of the <int> indicates an ACPI debug level,
 -                      which corresponds to the level in an ACPI_DEBUG_PRINT
 -                      statement.  After system has booted up, this mask
 -                      can be set via /sys/module/acpi/parameters/debug_level.
 -
 -                      CONFIG_ACPI_DEBUG must be enabled for this to produce
 -                      any output.  The number can be in decimal or prefixed
 -                      with 0x in hex.  Some of these options produce so much
 -                      output that the system is unusable.
 -
 -                      The following global components are defined by the
 -                      ACPI CA:
 -                             0x01 error
 -                             0x02 warn
 -                             0x04 init
 -                             0x08 debug object
 -                             0x10 info
 -                             0x20 init names
 -                             0x40 parse
 -                             0x80 load
 -                            0x100 dispatch
 -                            0x200 execute
 -                            0x400 names
 -                            0x800 operation region
 -                           0x1000 bfield
 -                           0x2000 tables
 -                           0x4000 values
 -                           0x8000 objects
 -                          0x10000 resources
 -                          0x20000 user requests
 -                          0x40000 package
 -                      The number can be in decimal or prefixed with 0x in hex.
 -                      Warning: Many of these options can produce a lot of
 -                      output and make your system unusable. Be very careful.
 +                      CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
 +                      debug output.  Bits in debug_layer correspond to a
 +                      _COMPONENT in an ACPI source file, e.g.,
 +                          #define _COMPONENT ACPI_PCI_COMPONENT
 +                      Bits in debug_level correspond to a level in
 +                      ACPI_DEBUG_PRINT statements, e.g.,
 +                          ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
 +                      See Documentation/acpi/debug.txt for more information
 +                      about debug layers and levels.
 +
 +                      Enable AML "Debug" output, i.e., stores to the Debug
 +                      object while interpreting AML:
 +                          acpi.debug_layer=0xffffffff acpi.debug_level=0x2
 +                      Enable PCI/PCI interrupt routing info messages:
 +                          acpi.debug_layer=0x400000 acpi.debug_level=0x4
 +                      Enable all messages related to ACPI hardware:
 +                          acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
 +
 +                      Some values produce so much output that the system is
 +                      unusable.  The "log_buf_len" parameter may be useful
 +                      if you need to capture more output.
  
        acpi.power_nocheck=     [HW,ACPI]
                        Format: 1/0 enable/disable the check of power state.
Simple merge
Simple merge
Simple merge
index 0000000000000000000000000000000000000000,70b1e91ae2ab63ee6b94ec46aace3c67ae1846b2..f022eb6f563701dd93c72d12caf37037a526b7b6
mode 000000,100644..100644
--- /dev/null
@@@ -1,0 -1,268 +1,267 @@@
 -#define ACPI_VIDEO_COMPONENT          0x08000000
+ /*
+  *  Copyright (C) 2008       SuSE Linux Products GmbH
+  *                           Thomas Renninger <trenn@suse.de>
+  *
+  *  May be copied or modified under the terms of the GNU General Public License
+  *
+  * video_detect.c:
+  * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c
+  * There a Linux specific (Spec does not provide a HID for video devices) is
+  * assinged
+  *
+  * After PCI devices are glued with ACPI devices
+  * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+  * devices for which a real graphics card is plugged in
+  *
+  * Now acpi_video_get_capabilities() can be called to check which
+  * capabilities the graphics cards plugged in support. The check for general
+  * video capabilities will be triggered by the first caller of
+  * acpi_video_get_capabilities(NULL); which will happen when the first
+  * backlight (or display output) switching supporting driver calls:
+  * acpi_video_backlight_support();
+  *
+  * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
+  * are available, video.ko should be used to handle the device.
+  *
+  * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
+  * sony_acpi,... can take care about backlight brightness and display output
+  * switching.
+  *
+  * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
+  * this file will not be compiled, acpi_video_get_capabilities() and
+  * acpi_video_backlight_support() will always return 0 and vendor specific
+  * drivers always can handle backlight.
+  *
+  */
+ #include <linux/acpi.h>
+ #include <linux/dmi.h>
+ ACPI_MODULE_NAME("video");
+ #define _COMPONENT            ACPI_VIDEO_COMPONENT
+ static long acpi_video_support;
+ static bool acpi_video_caps_checked;
+ static acpi_status
+ acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context,
+                         void **retyurn_value)
+ {
+       long *cap = context;
+       acpi_handle h_dummy;
+       if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) &&
+           ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) {
+               ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight "
+                                 "support\n"));
+               *cap |= ACPI_VIDEO_BACKLIGHT;
+               /* We have backlight support, no need to scan further */
+               return AE_CTRL_TERMINATE;
+       }
+       return 0;
+ }
+ /* Returns true if the device is a video device which can be handled by
+  * video.ko.
+  * The device will get a Linux specific CID added in scan.c to
+  * identify the device as an ACPI graphics device
+  * Be aware that the graphics device may not be physically present
+  * Use acpi_video_get_capabilities() to detect general ACPI video
+  * capabilities of present cards
+  */
+ long acpi_is_video_device(struct acpi_device *device)
+ {
+       acpi_handle h_dummy;
+       long video_caps = 0;
+       if (!device)
+               return 0;
+       /* Does this device able to support video switching ? */
+       if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+           ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
+               video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
+       /* Does this device able to retrieve a video ROM ? */
+       if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
+               video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
+       /* Does this device able to configure which video head to be POSTed ? */
+       if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
+           ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
+           ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
+               video_caps |= ACPI_VIDEO_DEVICE_POSTING;
+       /* Only check for backlight functionality if one of the above hit. */
+       if (video_caps)
+               acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle,
+                                   ACPI_UINT32_MAX, acpi_backlight_cap_match,
+                                   &video_caps, NULL);
+       return video_caps;
+ }
+ EXPORT_SYMBOL(acpi_is_video_device);
+ static acpi_status
+ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
+ {
+       long *cap = context;
+       struct device *dev;
+       struct acpi_device *acpi_dev;
+       const struct acpi_device_id video_ids[] = {
+               {ACPI_VIDEO_HID, 0},
+               {"", 0},
+       };
+       if (acpi_bus_get_device(handle, &acpi_dev))
+               return AE_OK;
+       if (!acpi_match_device_ids(acpi_dev, video_ids)) {
+               dev = acpi_get_physical_pci_device(handle);
+               if (!dev)
+                       return AE_OK;
+               put_device(dev);
+               *cap |= acpi_is_video_device(acpi_dev);
+       }
+       return AE_OK;
+ }
+ /*
+  * Returns the video capabilities of a specific ACPI graphics device
+  *
+  * if NULL is passed as argument all ACPI devices are enumerated and
+  * all graphics capabilities of physically present devices are
+  * summerized and returned. This is cached and done only once.
+  */
+ long acpi_video_get_capabilities(acpi_handle graphics_handle)
+ {
+       long caps = 0;
+       struct acpi_device *tmp_dev;
+       acpi_status status;
+       if (acpi_video_caps_checked && graphics_handle == NULL)
+               return acpi_video_support;
+       if (!graphics_handle) {
+               /* Only do the global walk through all graphics devices once */
+               acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+                                   ACPI_UINT32_MAX, find_video,
+                                   &caps, NULL);
+               /* There might be boot param flags set already... */
+               acpi_video_support |= caps;
+               acpi_video_caps_checked = 1;
+               /* Add blacklists here. Be careful to use the right *DMI* bits
+                * to still be able to override logic via boot params, e.g.:
+                *
+                *   if (dmi_name_in_vendors("XY")) {
+                *      acpi_video_support |=
+                *              ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR;
+                *      acpi_video_support |=
+                *              ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
+                *}
+                */
+       } else {
+               status = acpi_bus_get_device(graphics_handle, &tmp_dev);
+               if (ACPI_FAILURE(status)) {
+                       ACPI_EXCEPTION((AE_INFO, status, "Invalid device"));
+                       return 0;
+               }
+               acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle,
+                                   ACPI_UINT32_MAX, find_video,
+                                   &caps, NULL);
+       }
+       ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n",
+                         graphics_handle ? caps : acpi_video_support,
+                         graphics_handle ? "on device " : "in general",
+                         graphics_handle ? acpi_device_bid(tmp_dev) : ""));
+       return caps;
+ }
+ EXPORT_SYMBOL(acpi_video_get_capabilities);
+ /* Returns true if video.ko can do backlight switching */
+ int acpi_video_backlight_support(void)
+ {
+       /*
+        * We must check whether the ACPI graphics device is physically plugged
+        * in. Therefore this must be called after binding PCI and ACPI devices
+        */
+       if (!acpi_video_caps_checked)
+               acpi_video_get_capabilities(NULL);
+       /* First check for boot param -> highest prio */
+       if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR)
+               return 0;
+       else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO)
+               return 1;
+       /* Then check for DMI blacklist -> second highest prio */
+       if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR)
+               return 0;
+       else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO)
+               return 1;
+       /* Then go the default way */
+       return acpi_video_support & ACPI_VIDEO_BACKLIGHT;
+ }
+ EXPORT_SYMBOL(acpi_video_backlight_support);
+ /*
+  * Returns true if video.ko can do display output switching.
+  * This does not work well/at all with binary graphics drivers
+  * which disable system io ranges and do it on their own.
+  */
+ int acpi_video_display_switch_support(void)
+ {
+       if (!acpi_video_caps_checked)
+               acpi_video_get_capabilities(NULL);
+       if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR)
+               return 0;
+       else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO)
+               return 1;
+       if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR)
+               return 0;
+       else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO)
+               return 1;
+       return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING;
+ }
+ EXPORT_SYMBOL(acpi_video_display_switch_support);
+ /*
+  * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video
+  * To force that backlight or display output switching is processed by vendor
+  * specific acpi drivers or video.ko driver.
+  */
+ int __init acpi_backlight(char *str)
+ {
+       if (str == NULL || *str == '\0')
+               return 1;
+       else {
+               if (!strcmp("vendor", str))
+                       acpi_video_support |=
+                               ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR;
+               if (!strcmp("video", str))
+                       acpi_video_support |=
+                               ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+       }
+       return 1;
+ }
+ __setup("acpi_backlight=", acpi_backlight);
+ int __init acpi_display_output(char *str)
+ {
+       if (str == NULL || *str == '\0')
+               return 1;
+       else {
+               if (!strcmp("vendor", str))
+                       acpi_video_support |=
+                               ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR;
+               if (!strcmp("video", str))
+                       acpi_video_support |=
+                               ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
+       }
+       return 1;
+ }
+ __setup("acpi_display_output=", acpi_display_output);
Simple merge
Simple merge