[PATCH] x86_64: Implement early DMI scanning

There are more and more cases where we need to know DMI information
early to work around bugs.  i386 already had early DMI scanning, but
x86-64 didn't.  Implement this now.

This required some cleanup in the i386 code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/i386/kernel/dmi_scan.c b/arch/i386/kernel/dmi_scan.c
index d2dfd9c8d691e0b6003e78e5124b8ec6148a9a8a..ebc8dc116c430425dd0051734d5db552f8bde4df 100644 (file)
--- a/arch/i386/kernel/dmi_scan.c
+++ b/arch/i386/kernel/dmi_scan.c
@@ -5,6 +5,7 @@
 #include <linux/dmi.h>
 #include <linux/bootmem.h>
 #include <linux/slab.h>
+#include <asm/dmi.h>
 
 static char * __init dmi_string(struct dmi_header *dm, u8 s)
 {

diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 49f285871df580ac7c9ddff7491cd10ee2a0de5a..8acf5313e835f7d7c35d202e0b5f3e8d2e0c9f84 100644 (file)
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -68,6 +68,7 @@
 #include <asm/swiotlb.h>
 #include <asm/sections.h>
 #include <asm/gart-mapping.h>
+#include <asm/dmi.h>
 
 /*
  * Machine setup..
@@ -92,6 +93,12 @@ int bootloader_type;
 
 unsigned long saved_video_mode;
 
+/* 
+ * Early DMI memory
+ */
+int dmi_alloc_index;
+char dmi_alloc_data[DMI_MAX_DATA];
+
 /*
  * Setup options
  */
@@ -620,6 +627,8 @@ void __init setup_arch(char **cmdline_p)
 
        init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
 
+       dmi_scan_machine();
+
        zap_low_mappings(0);
 
 #ifdef CONFIG_ACPI
@@ -1412,10 +1421,3 @@ struct seq_operations cpuinfo_op = {
        .show = show_cpuinfo,
 };
 
-static int __init run_dmi_scan(void)
-{
-       dmi_scan_machine();
-       return 0;
-}
-core_initcall(run_dmi_scan);
-

diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index 675a4569133888e3d93dedb827d1edd19f1ff76c..54c7f5975b44d3faa5c92fe7e4efd2a232d2a44d 100644 (file)
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -225,6 +225,33 @@ static __meminit void unmap_low_page(int i)
        ti->allocated = 0; 
 } 
 
+/* Must run before zap_low_mappings */
+__init void *early_ioremap(unsigned long addr, unsigned long size)
+{
+       unsigned long map = round_down(addr, LARGE_PAGE_SIZE); 
+
+       /* actually usually some more */
+       if (size >= LARGE_PAGE_SIZE) { 
+               printk("SMBIOS area too long %lu\n", size);
+               return NULL;
+       }
+       set_pmd(temp_mappings[0].pmd,  __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
+       map += LARGE_PAGE_SIZE;
+       set_pmd(temp_mappings[1].pmd,  __pmd(map | _KERNPG_TABLE | _PAGE_PSE));
+       __flush_tlb();
+       return temp_mappings[0].address + (addr & (LARGE_PAGE_SIZE-1));
+}
+
+/* To avoid virtual aliases later */
+__init void early_iounmap(void *addr, unsigned long size)
+{
+       if ((void *)round_down((unsigned long)addr, LARGE_PAGE_SIZE) != temp_mappings[0].address)
+               printk("early_iounmap: bad address %p\n", addr);
+       set_pmd(temp_mappings[0].pmd, __pmd(0));
+       set_pmd(temp_mappings[1].pmd, __pmd(0));
+       __flush_tlb();
+}
+
 static void __meminit
 phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end)
 {

diff --git a/include/asm-i386/dmi.h b/include/asm-i386/dmi.h
new file mode 100644 (file)
index 0000000..38d4eeb
--- /dev/null
+++ b/include/asm-i386/dmi.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H 1
+
+#include <asm/io.h>
+
+/* Use early IO mappings for DMI because it's initialized early */
+#define dmi_ioremap bt_ioremap
+#define dmi_iounmap bt_iounmap
+#define dmi_alloc alloc_bootmem
+
+#endif

diff --git a/include/asm-x86_64/dmi.h b/include/asm-x86_64/dmi.h
new file mode 100644 (file)
index 0000000..93b2b15
--- /dev/null
+++ b/include/asm-x86_64/dmi.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H 1
+
+#include <asm/io.h>
+
+extern void *dmi_ioremap(unsigned long addr, unsigned long size);
+extern void dmi_iounmap(void *addr, unsigned long size);
+
+#define DMI_MAX_DATA 2048
+
+extern int dmi_alloc_index;
+extern char dmi_alloc_data[DMI_MAX_DATA];
+
+/* This is so early that there is no good way to allocate dynamic memory. 
+   Allocate data in an BSS array. */
+static inline void *dmi_alloc(unsigned len)
+{
+       int idx = dmi_alloc_index;
+       if ((dmi_alloc_index += len) > DMI_MAX_DATA)
+               return NULL;
+       return dmi_alloc_data + idx;
+}
+
+#define dmi_ioremap early_ioremap
+#define dmi_iounmap early_iounmap
+
+#endif

diff --git a/include/asm-x86_64/io.h b/include/asm-x86_64/io.h
index a85fe8370820023fbaf333e327ef38d3f38f229b..ac12bda3bb1f70be61d9503464957f62f5993e44 100644 (file)
--- a/include/asm-x86_64/io.h
+++ b/include/asm-x86_64/io.h
@@ -135,6 +135,9 @@ static inline void __iomem * ioremap (unsigned long offset, unsigned long size)
        return __ioremap(offset, size, 0);
 }
 
+extern void *early_ioremap(unsigned long addr, unsigned long size);
+extern void early_iounmap(void *addr, unsigned long size);
+
 /*
  * This one maps high address device memory and turns off caching for that area.
  * it's useful if some control registers are in such an area and write combining
@@ -143,11 +146,6 @@ static inline void __iomem * ioremap (unsigned long offset, unsigned long size)
 extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 extern void iounmap(volatile void __iomem *addr);
 
-/* Use normal IO mappings for DMI */
-#define dmi_ioremap ioremap
-#define dmi_iounmap(x,l) iounmap(x)
-#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
-
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
  */