]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
IB/ipath: Make some constants chip-specific, related cleanup
authorDave Olson <dave.olson@qlogic.com>
Thu, 17 Apr 2008 04:01:12 +0000 (21:01 -0700)
committerRoland Dreier <rolandd@cisco.com>
Thu, 17 Apr 2008 04:01:12 +0000 (21:01 -0700)
This patch makes some constants chip-specific, and makes some related
changes to prepare for supporting another HCA.

Signed-off-by: Dave Olson <dave.olson@qlogic.com
Signed-off-by: Roland Dreier <rolandd@cisco.com>
drivers/infiniband/hw/ipath/ipath_iba6110.c
drivers/infiniband/hw/ipath/ipath_iba6120.c
drivers/infiniband/hw/ipath/ipath_registers.h

index 9e2ced3cdc5e656af160b48cd5b53ba8753f19c6..684c27e4240622599c313688085d9e4c172d3e04 100644 (file)
@@ -40,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/htirq.h>
+#include <rdma/ib_verbs.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -476,7 +477,13 @@ static const struct ipath_hwerror_msgs ipath_6110_hwerror_msgs[] = {
 #define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
                          << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
 
-static int ipath_ht_txe_recover(struct ipath_devdata *);
+static void ipath_ht_txe_recover(struct ipath_devdata *dd)
+{
+       ++ipath_stats.sps_txeparity;
+       dev_info(&dd->pcidev->dev,
+               "Recovering from TXE PIO parity error\n");
+}
+
 
 /**
  * ipath_ht_handle_hwerrors - display hardware errors.
@@ -557,11 +564,11 @@ static void ipath_ht_handle_hwerrors(struct ipath_devdata *dd, char *msg,
                 * occur if a processor speculative read is done to the PIO
                 * buffer while we are sending a packet, for example.
                 */
-               if ((hwerrs & TXE_PIO_PARITY) && ipath_ht_txe_recover(dd))
+               if (hwerrs & TXE_PIO_PARITY) {
+                       ipath_ht_txe_recover(dd);
                        hwerrs &= ~TXE_PIO_PARITY;
-               if (hwerrs & RXE_EAGER_PARITY)
-                       ipath_dev_err(dd, "RXE parity, Eager TID error is not "
-                               "recoverable\n");
+               }
+
                if (!hwerrs) {
                        ipath_dbg("Clearing freezemode on ignored or "
                                  "recovered hardware error\n");
@@ -1653,22 +1660,6 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 }
 
 
-static int ipath_ht_txe_recover(struct ipath_devdata *dd)
-{
-       int cnt = ++ipath_stats.sps_txeparity;
-       if (cnt >= IPATH_MAX_PARITY_ATTEMPTS)  {
-               if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
-                       ipath_dev_err(dd,
-                               "Too many attempts to recover from "
-                               "TXE parity, giving up\n");
-               return 0;
-       }
-       dev_info(&dd->pcidev->dev,
-               "Recovering from TXE PIO parity error\n");
-       return 1;
-}
-
-
 /**
  * ipath_init_ht_get_base_info - set chip-specific flags for user code
  * @dd: the infinipath device
index c7a2f50824c08357be3620725077e83035bde4c0..8423fee6344b5e868e1faab7f6d53b4d531c6f66 100644 (file)
@@ -38,7 +38,7 @@
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-
+#include <rdma/ib_verbs.h>
 
 #include "ipath_kernel.h"
 #include "ipath_registers.h"
@@ -311,6 +311,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
        .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
 };
 
+/* kr_control bits */
+#define INFINIPATH_C_RESET 1U
+
 /* kr_intstatus, kr_intclear, kr_intmask bits */
 #define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1)
 #define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1)
@@ -338,6 +341,9 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define INFINIPATH_EXTS_MEMBIST_ENDTEST     0x0000000000004000
 #define INFINIPATH_EXTS_MEMBIST_FOUND       0x0000000000008000
 
+/* kr_xgxsconfig bits */
+#define INFINIPATH_XGXS_RESET          0x5ULL
+
 #define _IPATH_GPIO_SDA_NUM 1
 #define _IPATH_GPIO_SCL_NUM 0
 
@@ -346,6 +352,16 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define IPATH_GPIO_SCL (1ULL << \
        (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
 
+#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL
+#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \
+       ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
+#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid))
+#define INFINIPATH_RT_IS_VALID(tid) \
+       (((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \
+        ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK)))
+#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
+#define INFINIPATH_RT_ADDR_SHIFT 10
+
 #define INFINIPATH_R_INTRAVAIL_SHIFT 16
 #define INFINIPATH_R_TAILUPD_SHIFT 31
 
@@ -372,6 +388,8 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
 #define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
                        INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
                        << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
+                         << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
 
 static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
                               u32, unsigned long);
@@ -450,10 +468,8 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
         * make sure we get this much out, unless told to be quiet,
         * or it's occurred within the last 5 seconds
         */
-       if ((hwerrs & ~(dd->ipath_lasthwerror |
-                       ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
-                         INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
-                        << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
+       if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
+                       RXE_EAGER_PARITY)) ||
            (ipath_debug & __IPATH_VERBDBG))
                dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
                         "(cleared)\n", (unsigned long long) hwerrs);
@@ -1218,7 +1234,7 @@ static void ipath_pe_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
                }
                pa >>= 11;
                /* paranoia check */
-               if (pa & (7<<29))
+               if (pa & ~INFINIPATH_RT_ADDR_MASK)
                        ipath_dev_err(dd,
                                      "BUG: Physical page address 0x%lx "
                                      "has bits set in 31-29\n", pa);
@@ -1270,7 +1286,7 @@ static void ipath_pe_put_tid_2(struct ipath_devdata *dd, u64 __iomem *tidptr,
                }
                pa >>= 11;
                /* paranoia check */
-               if (pa & (7<<29))
+               if (pa & ~INFINIPATH_RT_ADDR_MASK)
                        ipath_dev_err(dd,
                                      "BUG: Physical page address 0x%lx "
                                      "has bits set in 31-29\n", pa);
index 92ad73a7fff0f20f353a1f63e2efe0bd265e0ce3..cb19ea260837d5046a0cd1a60065c111cda69d2f 100644 (file)
@@ -63,7 +63,6 @@
 /* kr_control bits */
 #define INFINIPATH_C_FREEZEMODE 0x00000002
 #define INFINIPATH_C_LINKENABLE 0x00000004
-#define INFINIPATH_C_RESET 0x00000001
 
 /* kr_sendctrl bits */
 #define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
 #define INFINIPATH_SERDC0_L1PWR_DN      0xF0ULL
 
 /* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET          0x7ULL
 #define INFINIPATH_XGXS_RX_POL_SHIFT 19
 #define INFINIPATH_XGXS_RX_POL_MASK 0xfULL