]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
zd1211rw: beacon config error checking
authorDaniel Drake <dsd@gentoo.org>
Fri, 4 Jul 2008 03:30:49 +0000 (04:30 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Tue, 8 Jul 2008 18:16:03 +0000 (14:16 -0400)
Add some error checking to the new beacon configuration code.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/zd1211rw/zd_mac.c

index 317c5e24f80c9e9f2b19d94d236a7245971e5b70..665f76af2fec134fcb53bad523dfee7593362088 100644 (file)
@@ -405,43 +405,66 @@ static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs,
        /* FIXME: Management frame? */
 }
 
-void zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon)
+static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon)
 {
        struct zd_mac *mac = zd_hw_mac(hw);
+       int r;
        u32 tmp, j = 0;
        /* 4 more bytes for tail CRC */
        u32 full_len = beacon->len + 4;
-       zd_iowrite32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, 0);
-       zd_ioread32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, &tmp);
+
+       r = zd_iowrite32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, 0);
+       if (r < 0)
+               return r;
+       r = zd_ioread32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, &tmp);
+       if (r < 0)
+               return r;
+
        while (tmp & 0x2) {
-               zd_ioread32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, &tmp);
+               r = zd_ioread32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, &tmp);
+               if (r < 0)
+                       return r;
                if ((++j % 100) == 0) {
                        printk(KERN_ERR "CR_BCN_FIFO_SEMAPHORE not ready\n");
                        if (j >= 500)  {
                                printk(KERN_ERR "Giving up beacon config.\n");
-                               return;
+                               return -ETIMEDOUT;
                        }
                }
                msleep(1);
        }
 
-       zd_iowrite32(&mac->chip, CR_BCN_FIFO, full_len - 1);
-       if (zd_chip_is_zd1211b(&mac->chip))
-               zd_iowrite32(&mac->chip, CR_BCN_LENGTH, full_len - 1);
+       r = zd_iowrite32(&mac->chip, CR_BCN_FIFO, full_len - 1);
+       if (r < 0)
+               return r;
+       if (zd_chip_is_zd1211b(&mac->chip)) {
+               r = zd_iowrite32(&mac->chip, CR_BCN_LENGTH, full_len - 1);
+               if (r < 0)
+                       return r;
+       }
 
-       for (j = 0 ; j < beacon->len; j++)
-               zd_iowrite32(&mac->chip, CR_BCN_FIFO,
+       for (j = 0 ; j < beacon->len; j++) {
+               r = zd_iowrite32(&mac->chip, CR_BCN_FIFO,
                                *((u8 *)(beacon->data + j)));
+               if (r < 0)
+                       return r;
+       }
 
-       for (j = 0; j < 4; j++)
-               zd_iowrite32(&mac->chip, CR_BCN_FIFO, 0x0);
+       for (j = 0; j < 4; j++) {
+               r = zd_iowrite32(&mac->chip, CR_BCN_FIFO, 0x0);
+               if (r < 0)
+                       return r;
+       }
+
+       r = zd_iowrite32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, 1);
+       if (r < 0)
+               return r;
 
-       zd_iowrite32(&mac->chip, CR_BCN_FIFO_SEMAPHORE, 1);
        /* 802.11b/g 2.4G CCK 1Mb
         * 802.11a, not yet implemented, uses different values (see GPL vendor
         * driver)
         */
-       zd_iowrite32(&mac->chip, CR_BCN_PLCP_CFG, 0x00000400 |
+       return zd_iowrite32(&mac->chip, CR_BCN_PLCP_CFG, 0x00000400 |
                        (full_len << 19));
 }
 
@@ -699,15 +722,20 @@ static int zd_op_config_interface(struct ieee80211_hw *hw,
 {
        struct zd_mac *mac = zd_hw_mac(hw);
        int associated;
+       int r;
 
        if (mac->type == IEEE80211_IF_TYPE_MESH_POINT ||
            mac->type == IEEE80211_IF_TYPE_IBSS) {
                associated = true;
                if (conf->beacon) {
-                       zd_mac_config_beacon(hw, conf->beacon);
-                       kfree_skb(conf->beacon);
-                       zd_set_beacon_interval(&mac->chip, BCN_MODE_IBSS |
+                       r = zd_mac_config_beacon(hw, conf->beacon);
+                       if (r < 0)
+                               return r;
+                       r = zd_set_beacon_interval(&mac->chip, BCN_MODE_IBSS |
                                        hw->conf.beacon_int);
+                       if (r < 0)
+                               return r;
+                       kfree_skb(conf->beacon);
                }
        } else
                associated = is_valid_ether_addr(conf->bssid);