#include "line.h"
#include "os.h"
-/* XXX: could well be moved to somewhere else, if needed. */
-static int my_printf(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
-
-static int my_printf(const char * fmt, ...)
-{
- /* Yes, can be called on atomic context.*/
- char *buf = kmalloc(4096, GFP_ATOMIC);
- va_list args;
- int r;
-
- if (!buf) {
- /* We print directly fmt.
- * Yes, yes, yes, feel free to complain. */
- r = strlen(fmt);
- } else {
- va_start(args, fmt);
- r = vsprintf(buf, fmt, args);
- va_end(args);
- fmt = buf;
- }
-
- if (r)
- r = os_write_file(1, fmt, r);
- return r;
-
-}
-
#ifdef CONFIG_NOCONFIG_CHAN
-/* Despite its name, there's no added trailing newline. */
-static int my_puts(const char * buf)
+static void *not_configged_init(char *str, int device,
+ const struct chan_opts *opts)
{
- return os_write_file(1, buf, strlen(buf));
-}
-
-static void *not_configged_init(char *str, int device, struct chan_opts *opts)
-{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return NULL;
}
static int not_configged_open(int input, int output, int primary, void *data,
char **dev_out)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return -ENODEV;
}
static void not_configged_close(int fd, void *data)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
}
static int not_configged_read(int fd, char *c_out, void *data)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return -EIO;
}
static int not_configged_write(int fd, const char *buf, int len, void *data)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return -EIO;
}
static int not_configged_console_write(int fd, const char *buf, int len)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return -EIO;
}
static int not_configged_window_size(int fd, void *data, unsigned short *rows,
unsigned short *cols)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
return -ENODEV;
}
static void not_configged_free(void *data)
{
- my_puts("Using a channel type which is configured out of "
+ printk("Using a channel type which is configured out of "
"UML\n");
}
};
static struct chan *parse_chan(struct line *line, char *str, int device,
- const struct chan_opts *opts)
+ const struct chan_opts *opts, char **error_out)
{
const struct chan_type *entry;
const struct chan_ops *ops;
}
}
if(ops == NULL){
- my_printf("parse_chan couldn't parse \"%s\"\n",
- str);
+ *error_out = "No match for configured backends";
return NULL;
}
- if(ops->init == NULL)
- return NULL;
+
data = (*ops->init)(str, device, opts);
- if(data == NULL)
+ if(data == NULL){
+ *error_out = "Configuration failed";
return NULL;
+ }
chan = kmalloc(sizeof(*chan), GFP_ATOMIC);
- if(chan == NULL)
+ if(chan == NULL){
+ *error_out = "Memory allocation failed";
return NULL;
+ }
*chan = ((struct chan) { .list = LIST_HEAD_INIT(chan->list),
.free_list =
LIST_HEAD_INIT(chan->free_list),
}
int parse_chan_pair(char *str, struct line *line, int device,
- const struct chan_opts *opts)
+ const struct chan_opts *opts, char **error_out)
{
struct list_head *chans = &line->chan_list;
struct chan *new, *chan;
in = str;
*out = '\0';
out++;
- new = parse_chan(line, in, device, opts);
+ new = parse_chan(line, in, device, opts, error_out);
if(new == NULL)
return -1;
new->input = 1;
list_add(&new->list, chans);
- new = parse_chan(line, out, device, opts);
+ new = parse_chan(line, out, device, opts, error_out);
if(new == NULL)
return -1;
new->output = 1;
}
else {
- new = parse_chan(line, str, device, opts);
+ new = parse_chan(line, str, device, opts, error_out);
if(new == NULL)
return -1;
close_chan(&lines[i].chan_list, 0);
}
-static void setup_one_line(struct line *lines, int n, char *init, int init_prio)
+static int setup_one_line(struct line *lines, int n, char *init, int init_prio,
+ char **error_out)
{
struct line *line = &lines[n];
+ int err = -EINVAL;
spin_lock(&line->count_lock);
if(line->tty != NULL){
- printk("line_setup - device %d is open\n", n);
+ *error_out = "Device is already open";
goto out;
}
line->valid = 1;
}
}
+ err = 0;
out:
spin_unlock(&line->count_lock);
+ return err;
}
/* Common setup code for both startup command line and mconsole initialization.
* @lines contains the array (of size @num) to modify;
* @init is the setup string;
+ * @error_out is an error string in the case of failure;
*/
-int line_setup(struct line *lines, unsigned int num, char *init)
+int line_setup(struct line *lines, unsigned int num, char *init,
+ char **error_out)
{
- int i, n;
+ int i, n, err;
char *end;
if(*init == '=') {
else {
n = simple_strtoul(init, &end, 0);
if(*end != '='){
- printk(KERN_ERR "line_setup failed to parse \"%s\"\n",
- init);
- return 0;
+ *error_out = "Couldn't parse device number";
+ return -EINVAL;
}
init = end;
}
init++;
if (n >= (signed int) num) {
- printk("line_setup - %d out of range ((0 ... %d) allowed)\n",
- n, num - 1);
- return 0;
+ *error_out = "Device number out of range";
+ return -EINVAL;
+ }
+ else if (n >= 0){
+ err = setup_one_line(lines, n, init, INIT_ONE, error_out);
+ if(err)
+ return err;
}
- else if (n >= 0)
- setup_one_line(lines, n, init, INIT_ONE);
else {
- for(i = 0; i < num; i++)
- setup_one_line(lines, i, init, INIT_ALL);
+ for(i = 0; i < num; i++){
+ err = setup_one_line(lines, i, init, INIT_ALL,
+ error_out);
+ if(err)
+ return err;
+ }
}
return n == -1 ? num : n;
}
int line_config(struct line *lines, unsigned int num, char *str,
- const struct chan_opts *opts)
+ const struct chan_opts *opts, char **error_out)
{
struct line *line;
char *new;
int n;
if(*str == '='){
- printk("line_config - can't configure all devices from "
- "mconsole\n");
- return 1;
+ *error_out = "Can't configure all devices from mconsole";
+ return -EINVAL;
}
new = kstrdup(str, GFP_KERNEL);
if(new == NULL){
- printk("line_config - kstrdup failed\n");
- return 1;
+ *error_out = "Failed to allocate memory";
+ return -ENOMEM;
}
- n = line_setup(lines, num, new);
+ n = line_setup(lines, num, new, error_out);
if(n < 0)
- return 1;
+ return n;
line = &lines[n];
- return parse_chan_pair(line->init_str, line, n, opts);
+ return parse_chan_pair(line->init_str, line, n, opts, error_out);
}
int line_get_config(char *name, struct line *lines, unsigned int num, char *str,
return n;
}
-int line_remove(struct line *lines, unsigned int num, int n)
+int line_remove(struct line *lines, unsigned int num, int n, char **error_out)
{
int err;
char config[sizeof("conxxxx=none\0")];
sprintf(config, "%d=none", n);
- err = line_setup(lines, num, config);
+ err = line_setup(lines, num, config, error_out);
if(err >= 0)
err = 0;
return err;
void lines_init(struct line *lines, int nlines, struct chan_opts *opts)
{
struct line *line;
+ char *error;
int i;
for(i = 0; i < nlines; i++){
if(line->init_str == NULL)
printk("lines_init - kstrdup returned NULL\n");
- if(parse_chan_pair(line->init_str, line, i, opts)){
- printk("parse_chan_pair failed for device %d\n", i);
+ if(parse_chan_pair(line->init_str, line, i, opts, &error)){
+ printk("parse_chan_pair failed for device %d : %s\n",
+ i, error);
line->valid = 0;
}
}
static struct list_head unplugged_pages = LIST_HEAD_INIT(unplugged_pages);
static int unplug_index = UNPLUGGED_PER_PAGE;
-static int mem_config(char *str)
+static int mem_config(char *str, char **error_out)
{
unsigned long long diff;
int err = -EINVAL, i, add;
char *ret;
- if(str[0] != '=')
+ if(str[0] != '='){
+ *error_out = "Expected '=' after 'mem'";
goto out;
+ }
str++;
if(str[0] == '-')
else if(str[0] == '+'){
add = 1;
}
- else goto out;
+ else {
+ *error_out = "Expected increment to start with '-' or '+'";
+ goto out;
+ }
str++;
diff = memparse(str, &ret);
- if(*ret != '\0')
+ if(*ret != '\0'){
+ *error_out = "Failed to parse memory increment";
goto out;
+ }
diff /= PAGE_SIZE;
unplugged = list_entry(entry,
struct unplugged_pages,
list);
- unplugged->pages[unplug_index++] = addr;
err = os_drop_memory(addr, PAGE_SIZE);
- if(err)
+ if(err){
printk("Failed to release memory - "
"errno = %d\n", err);
+ *error_out = "Failed to release memory";
+ goto out;
+ }
+ unplugged->pages[unplug_index++] = addr;
}
unplugged_pages_count++;
return 0;
}
-static int mem_remove(int n)
+static int mem_remove(int n, char **error_out)
{
+ *error_out = "Memory doesn't support the remove operation";
return -EBUSY;
}
void mconsole_config(struct mc_request *req)
{
struct mc_device *dev;
- char *ptr = req->request.data, *name;
+ char *ptr = req->request.data, *name, *error_string = "";
int err;
ptr += strlen("config");
ptr++;
if(*ptr == '='){
- err = (*dev->config)(name);
- mconsole_reply(req, "", err, 0);
+ err = (*dev->config)(name, &error_string);
+ mconsole_reply(req, error_string, err, 0);
}
else mconsole_get_config(dev->get_config, req, name);
}
goto out;
}
- err = (*dev->remove)(n);
+ err_msg = NULL;
+ err = (*dev->remove)(n, &err_msg);
switch(err){
case -ENODEV:
- err_msg = "Device doesn't exist";
+ if(err_msg == NULL)
+ err_msg = "Device doesn't exist";
break;
case -EBUSY:
- err_msg = "Device is currently open";
+ if(err_msg == NULL)
+ err_msg = "Device is currently open";
break;
default:
break;
/*
- * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
+ * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and
* James Leu (jleu@mindspring.net).
* Copyright (C) 2001 by various other people who didn't put their name here.
* Licensed under the GPL.
spin_lock(&lp->lock);
while((err = uml_net_rx(dev)) > 0) ;
if(err < 0) {
- printk(KERN_ERR
- "Device '%s' read returned %d, shutting it down\n",
+ printk(KERN_ERR
+ "Device '%s' read returned %d, shutting it down\n",
dev->name, err);
/* dev_close can't be called in interrupt context, and takes
* again lp->lock.
static int uml_net_close(struct net_device *dev)
{
struct uml_net_private *lp = dev->priv;
-
+
netif_stop_queue(dev);
free_irq(dev->irq, dev);
/* this is normally done in the interrupt when tx finishes */
netif_wake_queue(dev);
- }
+ }
else if(len == 0){
netif_start_queue(dev);
lp->stats.tx_dropped++;
struct uml_net_private *lp;
int save, err, size;
- size = transport->private_size + sizeof(struct uml_net_private) +
+ size = transport->private_size + sizeof(struct uml_net_private) +
sizeof(((struct uml_net_private *) 0)->user);
device = kzalloc(sizeof(*device), GFP_KERNEL);
lp->tl.function = uml_net_user_timer_expire;
memcpy(lp->mac, device->mac, sizeof(lp->mac));
- if (transport->user->init)
+ if (transport->user->init)
(*transport->user->init)(&lp->user, dev);
set_ether_mac(dev, device->mac);
return(device);
}
-static int eth_parse(char *str, int *index_out, char **str_out)
+static int eth_parse(char *str, int *index_out, char **str_out,
+ char **error_out)
{
char *end;
- int n;
+ int n, err = -EINVAL;;
n = simple_strtoul(str, &end, 0);
if(end == str){
- printk(KERN_ERR "eth_setup: Failed to parse '%s'\n", str);
- return(1);
- }
- if(n < 0){
- printk(KERN_ERR "eth_setup: device %d is negative\n", n);
- return(1);
+ *error_out = "Bad device number";
+ return err;
}
+
str = end;
if(*str != '='){
- printk(KERN_ERR
- "eth_setup: expected '=' after device number\n");
- return(1);
+ *error_out = "Expected '=' after device number";
+ return err;
}
+
str++;
if(find_device(n)){
- printk(KERN_ERR "eth_setup: Device %d already configured\n",
- n);
- return(1);
+ *error_out = "Device already configured";
+ return err;
}
- if(index_out) *index_out = n;
+
+ *index_out = n;
*str_out = str;
- return(0);
+ return 0;
}
struct eth_init {
static int eth_setup(char *str)
{
struct eth_init *new;
+ char *error;
int n, err;
- err = eth_parse(str, &n, &str);
- if(err)
+ err = eth_parse(str, &n, &str, &error);
+ if(err){
+ printk(KERN_ERR "eth_setup - Couldn't parse '%s' : %s\n",
+ str, error);
return 1;
+ }
new = alloc_bootmem(sizeof(*new));
if (new == NULL){
if(eth_setup_common(eth->init, eth->index))
list_del(ð->list);
}
-
+
return(1);
}
__initcall(eth_init);
#endif
-static int net_config(char *str)
+static int net_config(char *str, char **error_out)
{
int n, err;
- err = eth_parse(str, &n, &str);
- if(err) return(err);
+ err = eth_parse(str, &n, &str, error_out);
+ if(err)
+ return err;
+ /* This string is broken up and the pieces used by the underlying
+ * driver. So, it is freed only if eth_setup_common fails.
+ */
str = kstrdup(str, GFP_KERNEL);
if(str == NULL){
- printk(KERN_ERR "net_config failed to strdup string\n");
- return(-1);
+ *error_out = "net_config failed to strdup string";
+ return -ENOMEM;
}
err = !eth_setup_common(str, n);
- if(err)
+ if(err)
kfree(str);
return(err);
}
return n;
}
-static int net_remove(int n)
+static int net_remove(int n, char **error_out)
{
struct uml_net *device;
struct net_device *dev;
static int uml_net_init(void)
{
struct list_head *ele;
- struct uml_net_private *lp;
+ struct uml_net_private *lp;
struct in_device *ip;
struct in_ifaddr *in;
uml_inetaddr_event(NULL, NETDEV_UP, in);
in = in->ifa_next;
}
- }
+ }
return(0);
}
return(skb);
}
-void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *,
- void *),
+void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *,
+ void *),
void *arg)
{
struct net_device *dev = d;
struct in_ifaddr *in;
__be32 *mask_out = m;
- if(ip == NULL)
+ if(ip == NULL)
return(1);
in = ip->ifa_list;
- if(in == NULL)
+ if(in == NULL)
return(1);
*mask_out = in->ifa_mask;
free_pages((unsigned long) buffer, 0);
}
-int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out,
+int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out,
char **gate_addr)
{
char *remain;
{
return(eth_type_trans(skb, skb->dev));
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
.in_kernel = 1,
};
-static int ssl_config(char *str);
+static int ssl_config(char *str, char **error_out);
static int ssl_get_config(char *dev, char *str, int size, char **error_out);
-static int ssl_remove(int n);
+static int ssl_remove(int n, char **error_out);
static struct line_driver driver = {
.name = "UML serial line",
static struct lines lines = LINES_INIT(NR_PORTS);
-static int ssl_config(char *str)
+static int ssl_config(char *str, char **error_out)
{
- return line_config(serial_lines, ARRAY_SIZE(serial_lines), str, &opts);
+ return line_config(serial_lines, ARRAY_SIZE(serial_lines), str, &opts,
+ error_out);
}
static int ssl_get_config(char *dev, char *str, int size, char **error_out)
size, error_out);
}
-static int ssl_remove(int n)
+static int ssl_remove(int n, char **error_out)
{
- return line_remove(serial_lines, ARRAY_SIZE(serial_lines), n);
+ return line_remove(serial_lines, ARRAY_SIZE(serial_lines), n,
+ error_out);
}
static int ssl_open(struct tty_struct *tty, struct file *filp)
static int ssl_chan_setup(char *str)
{
- return line_setup(serial_lines, ARRAY_SIZE(serial_lines), str);
+ char *error;
+ int ret;
+
+ ret = line_setup(serial_lines, ARRAY_SIZE(serial_lines), str, &error);
+ if(ret < 0)
+ printk(KERN_ERR "Failed to set up serial line with "
+ "configuration string \"%s\" : %s\n", str, error);
+
+ return 1;
}
__setup("ssl", ssl_chan_setup);
.in_kernel = 1,
};
-static int con_config(char *str);
+static int con_config(char *str, char **error_out);
static int con_get_config(char *dev, char *str, int size, char **error_out);
-static int con_remove(int n);
+static int con_remove(int n, char **con_remove);
static struct line_driver driver = {
.name = "UML console",
[ 1 ... MAX_TTYS - 1 ] =
LINE_INIT(CONFIG_CON_CHAN, &driver) };
-static int con_config(char *str)
+static int con_config(char *str, char **error_out)
{
- return line_config(vts, ARRAY_SIZE(vts), str, &opts);
+ return line_config(vts, ARRAY_SIZE(vts), str, &opts, error_out);
}
static int con_get_config(char *dev, char *str, int size, char **error_out)
return line_get_config(dev, vts, ARRAY_SIZE(vts), str, size, error_out);
}
-static int con_remove(int n)
+static int con_remove(int n, char **error_out)
{
- return line_remove(vts, ARRAY_SIZE(vts), n);
+ return line_remove(vts, ARRAY_SIZE(vts), n, error_out);
}
static int con_open(struct tty_struct *tty, struct file *filp)
static int console_chan_setup(char *str)
{
- return line_setup(vts, ARRAY_SIZE(vts), str);
+ char *error;
+ int ret;
+
+ ret = line_setup(vts, ARRAY_SIZE(vts), str, &error);
+ if(ret < 0)
+ printk(KERN_ERR "Failed to set up console with "
+ "configuration string \"%s\" : %s\n", str, error);
+
+ return 1;
}
__setup("con", console_chan_setup);
__channel_help(console_chan_setup, "con");
* otherwise, the str pointer is used (and owned) inside ubd_devs array, so it
* should not be freed on exit.
*/
-static int ubd_setup_common(char *str, int *index_out)
+static int ubd_setup_common(char *str, int *index_out, char **error_out)
{
struct ubd *ubd_dev;
struct openflags flags = global_openflags;
str++;
if(!strcmp(str, "sync")){
global_openflags = of_sync(global_openflags);
- return(0);
+ return 0;
}
major = simple_strtoul(str, &end, 0);
if((*end != '\0') || (end == str)){
- printk(KERN_ERR
- "ubd_setup : didn't parse major number\n");
- return(1);
+ *error_out = "Didn't parse major number";
+ return -EINVAL;
}
- err = 1;
- mutex_lock(&ubd_lock);
- if(fake_major != MAJOR_NR){
- printk(KERN_ERR "Can't assign a fake major twice\n");
- goto out1;
- }
+ err = -EINVAL;
+ mutex_lock(&ubd_lock);
+ if(fake_major != MAJOR_NR){
+ *error_out = "Can't assign a fake major twice";
+ goto out1;
+ }
- fake_major = major;
+ fake_major = major;
printk(KERN_INFO "Setting extra ubd major number to %d\n",
major);
- err = 0;
- out1:
- mutex_unlock(&ubd_lock);
- return(err);
+ err = 0;
+ out1:
+ mutex_unlock(&ubd_lock);
+ return err;
}
n = parse_unit(&str);
if(n < 0){
- printk(KERN_ERR "ubd_setup : couldn't parse unit number "
- "'%s'\n", str);
- return(1);
+ *error_out = "Couldn't parse device number";
+ return -EINVAL;
}
if(n >= MAX_DEV){
- printk(KERN_ERR "ubd_setup : index %d out of range "
- "(%d devices, from 0 to %d)\n", n, MAX_DEV, MAX_DEV - 1);
- return(1);
+ *error_out = "Device number out of range";
+ return 1;
}
- err = 1;
+ err = -EBUSY;
mutex_lock(&ubd_lock);
ubd_dev = &ubd_devs[n];
if(ubd_dev->file != NULL){
- printk(KERN_ERR "ubd_setup : device already configured\n");
+ *error_out = "Device is already configured";
goto out;
}
if (index_out)
*index_out = n;
+ err = -EINVAL;
for (i = 0; i < sizeof("rscd="); i++) {
switch (*str) {
case 'r':
str++;
goto break_loop;
default:
- printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r, s, c, or d)\n");
+ *error_out = "Expected '=' or flag letter "
+ "(r, s, c, or d)";
goto out;
}
str++;
}
- if (*str == '=')
- printk(KERN_ERR "ubd_setup : Too many flags specified\n");
- else
- printk(KERN_ERR "ubd_setup : Expected '='\n");
+ if (*str == '=')
+ *error_out = "Too many flags specified";
+ else
+ *error_out = "Missing '='";
goto out;
break_loop:
- err = 0;
backing_file = strchr(str, ',');
- if (!backing_file) {
+ if (backing_file == NULL)
backing_file = strchr(str, ':');
- }
- if(backing_file){
- if(ubd_dev->no_cow)
- printk(KERN_ERR "Can't specify both 'd' and a "
- "cow file\n");
+ if(backing_file != NULL){
+ if(ubd_dev->no_cow){
+ *error_out = "Can't specify both 'd' and a cow file";
+ goto out;
+ }
else {
*backing_file = '\0';
backing_file++;
}
}
+ err = 0;
ubd_dev->file = str;
ubd_dev->cow.file = backing_file;
ubd_dev->boot_openflags = flags;
out:
mutex_unlock(&ubd_lock);
- return(err);
+ return err;
}
static int ubd_setup(char *str)
{
- ubd_setup_common(str, NULL);
- return(1);
+ char *error;
+ int err;
+
+ err = ubd_setup_common(str, NULL, &error);
+ if(err)
+ printk(KERN_ERR "Failed to initialize device with \"%s\" : "
+ "%s\n", str, error);
+ return 1;
}
__setup("ubd", ubd_setup);
" use either a ':' or a ',': the first one allows writing things like;\n"
" ubd0=~/Uml/root_cow:~/Uml/root_backing_file\n"
" while with a ',' the shell would not expand the 2nd '~'.\n"
-" When using only one filename, UML will detect whether to thread it like\n"
+" When using only one filename, UML will detect whether to treat it like\n"
" a COW file or a backing file. To override this detection, add the 'd'\n"
" flag:\n"
" ubd0d=BackingFile\n"
#define ROUND_BLOCK(n) ((n + ((1 << 9) - 1)) & (-1 << 9))
-static int ubd_add(int n)
+static int ubd_add(int n, char **error_out)
{
struct ubd *ubd_dev = &ubd_devs[n];
- int err;
+ int err = 0;
- err = -ENODEV;
if(ubd_dev->file == NULL)
goto out;
err = ubd_file_size(ubd_dev, &ubd_dev->size);
- if(err < 0)
+ if(err < 0){
+ *error_out = "Couldn't determine size of device's file";
goto out;
+ }
ubd_dev->size = ROUND_BLOCK(ubd_dev->size);
return err;
}
-static int ubd_config(char *str)
+static int ubd_config(char *str, char **error_out)
{
int n, ret;
+ /* This string is possibly broken up and stored, so it's only
+ * freed if ubd_setup_common fails, or if only general options
+ * were set.
+ */
str = kstrdup(str, GFP_KERNEL);
if (str == NULL) {
- printk(KERN_ERR "ubd_config failed to strdup string\n");
- ret = 1;
- goto out;
+ *error_out = "Failed to allocate memory";
+ return -ENOMEM;
}
- ret = ubd_setup_common(str, &n);
- if (ret) {
- ret = -1;
+
+ ret = ubd_setup_common(str, &n, error_out);
+ if (ret)
goto err_free;
- }
+
if (n == -1) {
ret = 0;
goto err_free;
}
mutex_lock(&ubd_lock);
- ret = ubd_add(n);
+ ret = ubd_add(n, error_out);
if (ret)
ubd_devs[n].file = NULL;
mutex_unlock(&ubd_lock);
return n;
}
-static int ubd_remove(int n)
+static int ubd_remove(int n, char **error_out)
{
struct ubd *ubd_dev;
int err = -ENODEV;
return err;
}
-/* All these are called by mconsole in process context and without ubd-specific locks. */
+/* All these are called by mconsole in process context and without
+ * ubd-specific locks.
+ */
static struct mc_device ubd_mc = {
.name = "ubd",
.config = ubd_config,
static int __init ubd_init(void)
{
- int i;
+ char *error;
+ int i, err;
if (register_blkdev(MAJOR_NR, "ubd"))
return -1;
return -1;
}
platform_driver_register(&ubd_driver);
- for (i = 0; i < MAX_DEV; i++)
- ubd_add(i);
+ for (i = 0; i < MAX_DEV; i++){
+ err = ubd_add(i, &error);
+ if(err)
+ printk(KERN_ERR "Failed to initialize ubd device %d :"
+ "%s\n", i, error);
+ }
return 0;
}
extern void chan_interrupt(struct list_head *chans, struct delayed_work *task,
struct tty_struct *tty, int irq);
extern int parse_chan_pair(char *str, struct line *line, int device,
- const struct chan_opts *opts);
+ const struct chan_opts *opts, char **error_out);
extern int open_chan(struct list_head *chans);
extern int write_chan(struct list_head *chans, const char *buf, int len,
int write_irq);
extern void line_close(struct tty_struct *tty, struct file * filp);
extern int line_open(struct line *lines, struct tty_struct *tty);
extern int line_setup(struct line *lines, unsigned int sizeof_lines,
- char *init);
+ char *init, char **error_out);
extern int line_write(struct tty_struct *tty, const unsigned char *buf,
int len);
extern void line_put_char(struct tty_struct *tty, unsigned char ch);
extern void close_lines(struct line *lines, int nlines);
extern int line_config(struct line *lines, unsigned int sizeof_lines,
- char *str, const struct chan_opts *opts);
+ char *str, const struct chan_opts *opts,
+ char **error_out);
extern int line_id(char **str, int *start_out, int *end_out);
-extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n);
+extern int line_remove(struct line *lines, unsigned int sizeof_lines, int n,
+ char **error_out);
extern int line_get_config(char *dev, struct line *lines,
unsigned int sizeof_lines, char *str,
int size, char **error_out);
struct mc_device {
struct list_head list;
char *name;
- int (*config)(char *);
+ int (*config)(char *, char **);
int (*get_config)(char *, char *, int, char **);
int (*id)(char **, int *, int *);
- int (*remove)(int);
+ int (*remove)(int, char **);
};
#define CONFIG_CHUNK(str, size, current, chunk, end) \
#endif
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
init_proxy(debugger_pid, 0, 0);
}
-int gdb_config(char *str)
+int gdb_config(char *str, char **error_out)
{
struct gdb_data data;
exit_debugger_cb(NULL);
}
-int gdb_remove(int unused)
+int gdb_remove(int unused, char **error_out)
{
initial_thread_cb(remove_gdb_cb, NULL);
return 0;
#ifdef CONFIG_MCONSOLE
-extern int gdb_config(char *str);
-extern int gdb_remove(int n);
+extern int gdb_config(char *str, char **error_out);
+extern int gdb_remove(int n, char **error_out);
static struct mc_device gdb_mc = {
.name = "gdb",
projects / linux-2.6-omap-h63xx.git / commitdiff