]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
isicom: use tty_port
authorAlan Cox <alan@redhat.com>
Wed, 16 Jul 2008 20:55:45 +0000 (21:55 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 21 Jul 2008 00:12:37 +0000 (17:12 -0700)
Switch isicom to use a tty_port structure for some fields

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/char/isicom.c

index a1a67e3d52cc32d6a85c914bd9776e74ca76133c..5a53c15b0dc2f5d69f6c3ffff4f5a02bad81c67c 100644 (file)
@@ -198,17 +198,12 @@ struct    isi_board {
 
 struct isi_port {
        unsigned short          magic;
-       unsigned int            flags;
-       int                     count;
-       int                     blocked_open;
+       struct tty_port         port;
        int                     close_delay;
        u16                     channel;
        u16                     status;
        u16                     closing_wait;
        struct isi_board        *card;
-       struct tty_struct       *tty;
-       wait_queue_head_t       close_wait;
-       wait_queue_head_t       open_wait;
        unsigned char           *xmit_buf;
        int                     xmit_head;
        int                     xmit_tail;
@@ -430,11 +425,11 @@ static void isicom_tx(unsigned long _data)
 
        for (; count > 0; count--, port++) {
                /* port not active or tx disabled to force flow control */
-               if (!(port->flags & ASYNC_INITIALIZED) ||
+               if (!(port->port.flags & ASYNC_INITIALIZED) ||
                                !(port->status & ISI_TXOK))
                        continue;
 
-               tty = port->tty;
+               tty = port->port.tty;
 
                if (tty == NULL)
                        continue;
@@ -458,7 +453,7 @@ static void isicom_tx(unsigned long _data)
                        if (residue == YES) {
                                residue = NO;
                                if (cnt > 0) {
-                                       wrd |= (port->xmit_buf[port->xmit_tail]
+                                       wrd |= (port->port.xmit_buf[port->xmit_tail]
                                                                        << 8);
                                        port->xmit_tail = (port->xmit_tail + 1)
                                                & (SERIAL_XMIT_SIZE - 1);
@@ -474,14 +469,14 @@ static void isicom_tx(unsigned long _data)
                        if (cnt <= 0)
                                break;
                        word_count = cnt >> 1;
-                       outsw(base, port->xmit_buf+port->xmit_tail, word_count);
+                       outsw(base, port->port.xmit_buf+port->xmit_tail, word_count);
                        port->xmit_tail = (port->xmit_tail
                                + (word_count << 1)) & (SERIAL_XMIT_SIZE - 1);
                        txcount -= (word_count << 1);
                        port->xmit_cnt -= (word_count << 1);
                        if (cnt & 0x0001) {
                                residue = YES;
-                               wrd = port->xmit_buf[port->xmit_tail];
+                               wrd = port->port.xmit_buf[port->xmit_tail];
                                port->xmit_tail = (port->xmit_tail + 1)
                                        & (SERIAL_XMIT_SIZE - 1);
                                port->xmit_cnt--;
@@ -548,13 +543,13 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                return IRQ_HANDLED;
        }
        port = card->ports + channel;
-       if (!(port->flags & ASYNC_INITIALIZED)) {
+       if (!(port->port.flags & ASYNC_INITIALIZED)) {
                outw(0x0000, base+0x04); /* enable interrupts */
                spin_unlock(&card->card_lock);
                return IRQ_HANDLED;
        }
 
-       tty = port->tty;
+       tty = port->port.tty;
        if (tty == NULL) {
                word_count = byte_count >> 1;
                while (byte_count > 1) {
@@ -572,7 +567,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                header = inw(base);
                switch (header & 0xff) {
                case 0: /* Change in EIA signals */
-                       if (port->flags & ASYNC_CHECK_CD) {
+                       if (port->port.flags & ASYNC_CHECK_CD) {
                                if (port->status & ISI_DCD) {
                                        if (!(header & ISI_DCD)) {
                                        /* Carrier has been lost  */
@@ -585,7 +580,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                                /* Carrier has been detected */
                                        pr_dbg("interrupt: DCD->high.\n");
                                        port->status |= ISI_DCD;
-                                       wake_up_interruptible(&port->open_wait);
+                                       wake_up_interruptible(&port->port.open_wait);
                                }
                        } else {
                                if (header & ISI_DCD)
@@ -594,17 +589,17 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
                                        port->status &= ~ISI_DCD;
                        }
 
-                       if (port->flags & ASYNC_CTS_FLOW) {
-                               if (port->tty->hw_stopped) {
+                       if (port->port.flags & ASYNC_CTS_FLOW) {
+                               if (port->port.tty->hw_stopped) {
                                        if (header & ISI_CTS) {
-                                               port->tty->hw_stopped = 0;
+                                               port->port.tty->hw_stopped = 0;
                                                /* start tx ing */
                                                port->status |= (ISI_TXOK
                                                        | ISI_CTS);
                                                tty_wakeup(tty);
                                        }
                                } else if (!(header & ISI_CTS)) {
-                                       port->tty->hw_stopped = 1;
+                                       port->port.tty->hw_stopped = 1;
                                        /* stop tx ing */
                                        port->status &= ~(ISI_TXOK | ISI_CTS);
                                }
@@ -629,7 +624,7 @@ static irqreturn_t isicom_interrupt(int irq, void *dev_id)
 
                case 1: /* Received Break !!! */
                        tty_insert_flip_char(tty, 0, TTY_BREAK);
-                       if (port->flags & ASYNC_SAK)
+                       if (port->port.flags & ASYNC_SAK)
                                do_SAK(tty);
                        tty_flip_buffer_push(tty);
                        break;
@@ -681,7 +676,7 @@ static void isicom_config_port(struct isi_port *port)
                shift_count = card->shift_count;
        unsigned char flow_ctrl;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
        if (tty == NULL)
                return;
@@ -697,7 +692,7 @@ static void isicom_config_port(struct isi_port *port)
 
                /* 1,2,3,4 => 57.6, 115.2, 230, 460 kbps resp. */
                if (baud < 1 || baud > 4)
-                       port->tty->termios->c_cflag &= ~CBAUDEX;
+                       port->port.tty->termios->c_cflag &= ~CBAUDEX;
                else
                        baud += 15;
        }
@@ -708,13 +703,13 @@ static void isicom_config_port(struct isi_port *port)
                 *  the 'setserial' utility.
                 */
 
-               if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+               if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
                        baud++; /*  57.6 Kbps */
-               if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+               if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
                        baud += 2; /*  115  Kbps */
-               if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+               if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
                        baud += 3; /* 230 kbps*/
-               if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+               if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
                        baud += 4; /* 460 kbps*/
        }
        if (linuxb_to_isib[baud] == -1) {
@@ -754,15 +749,15 @@ static void isicom_config_port(struct isi_port *port)
                InterruptTheCard(base);
        }
        if (C_CLOCAL(tty))
-               port->flags &= ~ASYNC_CHECK_CD;
+               port->port.flags &= ~ASYNC_CHECK_CD;
        else
-               port->flags |= ASYNC_CHECK_CD;
+               port->port.flags |= ASYNC_CHECK_CD;
 
        /* flow control settings ...*/
        flow_ctrl = 0;
-       port->flags &= ~ASYNC_CTS_FLOW;
+       port->port.flags &= ~ASYNC_CTS_FLOW;
        if (C_CRTSCTS(tty)) {
-               port->flags |= ASYNC_CTS_FLOW;
+               port->port.flags |= ASYNC_CTS_FLOW;
                flow_ctrl |= ISICOM_CTSRTS;
        }
        if (I_IXON(tty))
@@ -809,23 +804,15 @@ static int isicom_setup_port(struct isi_port *port)
        struct isi_board *card = port->card;
        unsigned long flags;
 
-       if (port->flags & ASYNC_INITIALIZED)
+       if (port->port.flags & ASYNC_INITIALIZED)
                return 0;
-       if (!port->xmit_buf) {
-               /* Relies on BKL */
-               unsigned long page  = get_zeroed_page(GFP_KERNEL);
-               if (page == 0)
-                       return -ENOMEM;
-               if (port->xmit_buf)
-                       free_page(page);
-               else
-                       port->xmit_buf = (unsigned char *) page;
-       }
+       if (tty_port_alloc_xmit_buf(&port->port) < 0)
+               return -ENOMEM;
 
        spin_lock_irqsave(&card->card_lock, flags);
-       if (port->tty)
-               clear_bit(TTY_IO_ERROR, &port->tty->flags);
-       if (port->count == 1)
+       if (port->port.tty)
+               clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
+       if (port->port.count == 1)
                card->count++;
 
        port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
@@ -839,7 +826,7 @@ static int isicom_setup_port(struct isi_port *port)
        }
 
        isicom_config_port(port);
-       port->flags |= ASYNC_INITIALIZED;
+       port->port.flags |= ASYNC_INITIALIZED;
        spin_unlock_irqrestore(&card->card_lock, flags);
 
        return 0;
@@ -855,10 +842,10 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
 
        /* block if port is in the process of being closed */
 
-       if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
+       if (tty_hung_up_p(filp) || port->port.flags & ASYNC_CLOSING) {
                pr_dbg("block_til_ready: close in progress.\n");
-               interruptible_sleep_on(&port->close_wait);
-               if (port->flags & ASYNC_HUP_NOTIFY)
+               interruptible_sleep_on(&port->port.close_wait);
+               if (port->port.flags & ASYNC_HUP_NOTIFY)
                        return -EAGAIN;
                else
                        return -ERESTARTSYS;
@@ -869,7 +856,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
        if ((filp->f_flags & O_NONBLOCK) ||
                        (tty->flags & (1 << TTY_IO_ERROR))) {
                pr_dbg("block_til_ready: non-block mode.\n");
-               port->flags |= ASYNC_NORMAL_ACTIVE;
+               port->port.flags |= ASYNC_NORMAL_ACTIVE;
                return 0;
        }
 
@@ -879,26 +866,26 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
        /* block waiting for DCD to be asserted, and while
                                                callout dev is busy */
        retval = 0;
-       add_wait_queue(&port->open_wait, &wait);
+       add_wait_queue(&port->port.open_wait, &wait);
 
        spin_lock_irqsave(&card->card_lock, flags);
        if (!tty_hung_up_p(filp))
-               port->count--;
-       port->blocked_open++;
+               port->port.count--;
+       port->port.blocked_open++;
        spin_unlock_irqrestore(&card->card_lock, flags);
 
        while (1) {
                raise_dtr_rts(port);
 
                set_current_state(TASK_INTERRUPTIBLE);
-               if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) {
-                       if (port->flags & ASYNC_HUP_NOTIFY)
+               if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) {
+                       if (port->port.flags & ASYNC_HUP_NOTIFY)
                                retval = -EAGAIN;
                        else
                                retval = -ERESTARTSYS;
                        break;
                }
-               if (!(port->flags & ASYNC_CLOSING) &&
+               if (!(port->port.flags & ASYNC_CLOSING) &&
                                (do_clocal || (port->status & ISI_DCD))) {
                        break;
                }
@@ -909,15 +896,15 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                schedule();
        }
        set_current_state(TASK_RUNNING);
-       remove_wait_queue(&port->open_wait, &wait);
+       remove_wait_queue(&port->port.open_wait, &wait);
        spin_lock_irqsave(&card->card_lock, flags);
        if (!tty_hung_up_p(filp))
-               port->count++;
-       port->blocked_open--;
+               port->port.count++;
+       port->port.blocked_open--;
        spin_unlock_irqrestore(&card->card_lock, flags);
        if (retval)
                return retval;
-       port->flags |= ASYNC_NORMAL_ACTIVE;
+       port->port.flags |= ASYNC_NORMAL_ACTIVE;
        return 0;
 }
 
@@ -947,9 +934,9 @@ static int isicom_open(struct tty_struct *tty, struct file *filp)
 
        isicom_setup_board(card);
 
-       port->count++;
+       port->port.count++;
        tty->driver_data = port;
-       port->tty = tty;
+       port->port.tty = tty;
        error = isicom_setup_port(port);
        if (error == 0)
                error = block_til_ready(tty, filp, port);
@@ -970,18 +957,15 @@ static void isicom_shutdown_port(struct isi_port *port)
        struct isi_board *card = port->card;
        struct tty_struct *tty;
 
-       tty = port->tty;
+       tty = port->port.tty;
 
-       if (!(port->flags & ASYNC_INITIALIZED))
+       if (!(port->port.flags & ASYNC_INITIALIZED))
                return;
 
-       if (port->xmit_buf) {
-               free_page((unsigned long) port->xmit_buf);
-               port->xmit_buf = NULL;
-       }
-       port->flags &= ~ASYNC_INITIALIZED;
+       tty_port_free_xmit_buf(&port->port);
+       port->port.flags &= ~ASYNC_INITIALIZED;
        /* 3rd October 2000 : Vinayak P Risbud */
-       port->tty = NULL;
+       port->port.tty = NULL;
 
        /*Fix done by Anil .S on 30-04-2001
        remote login through isi port has dtr toggle problem
@@ -1046,24 +1030,24 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
                return;
        }
 
-       if (tty->count == 1 && port->count != 1) {
+       if (tty->count == 1 && port->port.count != 1) {
                printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
                        "count tty->count = 1 port count = %d.\n",
-                       card->base, port->count);
-               port->count = 1;
+                       card->base, port->port.count);
+               port->port.count = 1;
        }
-       if (--port->count < 0) {
+       if (--port->port.count < 0) {
                printk(KERN_WARNING "ISICOM:(0x%lx) isicom_close: bad port "
                        "count for channel%d = %d", card->base, port->channel,
-                       port->count);
-               port->count = 0;
+                       port->port.count);
+               port->port.count = 0;
        }
 
-       if (port->count) {
+       if (port->port.count) {
                spin_unlock_irqrestore(&card->card_lock, flags);
                return;
        }
-       port->flags |= ASYNC_CLOSING;
+       port->port.flags |= ASYNC_CLOSING;
        tty->closing = 1;
        spin_unlock_irqrestore(&card->card_lock, flags);
 
@@ -1072,7 +1056,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
        /* indicate to the card that no more data can be received
           on this port */
        spin_lock_irqsave(&card->card_lock, flags);
-       if (port->flags & ASYNC_INITIALIZED) {
+       if (port->port.flags & ASYNC_INITIALIZED) {
                card->port_status &= ~(1 << port->channel);
                outw(card->port_status, card->base + 0x02);
        }
@@ -1085,7 +1069,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
        spin_lock_irqsave(&card->card_lock, flags);
        tty->closing = 0;
 
-       if (port->blocked_open) {
+       if (port->port.blocked_open) {
                spin_unlock_irqrestore(&card->card_lock, flags);
                if (port->close_delay) {
                        pr_dbg("scheduling until time out.\n");
@@ -1093,10 +1077,10 @@ static void isicom_close(struct tty_struct *tty, struct file *filp)
                                jiffies_to_msecs(port->close_delay));
                }
                spin_lock_irqsave(&card->card_lock, flags);
-               wake_up_interruptible(&port->open_wait);
+               wake_up_interruptible(&port->port.open_wait);
        }
-       port->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
-       wake_up_interruptible(&port->close_wait);
+       port->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
+       wake_up_interruptible(&port->port.close_wait);
        spin_unlock_irqrestore(&card->card_lock, flags);
 }
 
@@ -1112,9 +1096,6 @@ static int isicom_write(struct tty_struct *tty,   const unsigned char *buf,
        if (isicom_paranoia_check(port, tty->name, "isicom_write"))
                return 0;
 
-       if (!port->xmit_buf)
-               return 0;
-
        spin_lock_irqsave(&card->card_lock, flags);
 
        while (1) {
@@ -1123,7 +1104,7 @@ static int isicom_write(struct tty_struct *tty,   const unsigned char *buf,
                if (cnt <= 0)
                        break;
 
-               memcpy(port->xmit_buf + port->xmit_head, buf, cnt);
+               memcpy(port->port.xmit_buf + port->xmit_head, buf, cnt);
                port->xmit_head = (port->xmit_head + cnt) & (SERIAL_XMIT_SIZE
                        - 1);
                port->xmit_cnt += cnt;
@@ -1147,16 +1128,13 @@ static int isicom_put_char(struct tty_struct *tty, unsigned char ch)
        if (isicom_paranoia_check(port, tty->name, "isicom_put_char"))
                return 0;
 
-       if (!port->xmit_buf)
-               return 0;
-
        spin_lock_irqsave(&card->card_lock, flags);
        if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
                spin_unlock_irqrestore(&card->card_lock, flags);
                return 0;
        }
 
-       port->xmit_buf[port->xmit_head++] = ch;
+       port->port.xmit_buf[port->xmit_head++] = ch;
        port->xmit_head &= (SERIAL_XMIT_SIZE - 1);
        port->xmit_cnt++;
        spin_unlock_irqrestore(&card->card_lock, flags);
@@ -1172,7 +1150,7 @@ static void isicom_flush_chars(struct tty_struct *tty)
                return;
 
        if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-                       !port->xmit_buf)
+                       !port->port.xmit_buf)
                return;
 
        /* this tells the transmitter to consider this port for
@@ -1274,23 +1252,23 @@ static int isicom_set_serial_info(struct isi_port *port,
 
        lock_kernel();
 
-       reconfig_port = ((port->flags & ASYNC_SPD_MASK) !=
+       reconfig_port = ((port->port.flags & ASYNC_SPD_MASK) !=
                (newinfo.flags & ASYNC_SPD_MASK));
 
        if (!capable(CAP_SYS_ADMIN)) {
                if ((newinfo.close_delay != port->close_delay) ||
                                (newinfo.closing_wait != port->closing_wait) ||
                                ((newinfo.flags & ~ASYNC_USR_MASK) !=
-                               (port->flags & ~ASYNC_USR_MASK))) {
+                               (port->port.flags & ~ASYNC_USR_MASK))) {
                        unlock_kernel();
                        return -EPERM;
                }
-               port->flags = ((port->flags & ~ASYNC_USR_MASK) |
+               port->port.flags = ((port->port.flags & ~ASYNC_USR_MASK) |
                                (newinfo.flags & ASYNC_USR_MASK));
        } else {
                port->close_delay = newinfo.close_delay;
                port->closing_wait = newinfo.closing_wait;
-               port->flags = ((port->flags & ~ASYNC_FLAGS) |
+               port->port.flags = ((port->port.flags & ~ASYNC_FLAGS) |
                                (newinfo.flags & ASYNC_FLAGS));
        }
        if (reconfig_port) {
@@ -1314,7 +1292,7 @@ static int isicom_get_serial_info(struct isi_port *port,
        out_info.line = port - isi_ports;
        out_info.port = port->card->base;
        out_info.irq = port->card->irq;
-       out_info.flags = port->flags;
+       out_info.flags = port->port.flags;
 /*     out_info.baud_base = ? */
        out_info.close_delay = port->close_delay;
        out_info.closing_wait = port->closing_wait;
@@ -1454,10 +1432,10 @@ static void isicom_hangup(struct tty_struct *tty)
        isicom_shutdown_port(port);
        spin_unlock_irqrestore(&port->card->card_lock, flags);
 
-       port->count = 0;
-       port->flags &= ~ASYNC_NORMAL_ACTIVE;
-       port->tty = NULL;
-       wake_up_interruptible(&port->open_wait);
+       port->port.count = 0;
+       port->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+       port->port.tty = NULL;
+       wake_up_interruptible(&port->port.open_wait);
 }
 
 
@@ -1832,8 +1810,7 @@ static int __init isicom_init(void)
                        port->close_delay = 50 * HZ/100;
                        port->closing_wait = 3000 * HZ/100;
                        port->status = 0;
-                       init_waitqueue_head(&port->open_wait);
-                       init_waitqueue_head(&port->close_wait);
+                       tty_port_init(&port->port);
                        /*  . . .  */
                }
                isi_card[idx].base = 0;