]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 5424/1: h3600: clean up mtd partitions table
authorDmitry Artamonow <mad_soft@inbox.ru>
Sun, 15 Mar 2009 18:09:50 +0000 (19:09 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sun, 15 Mar 2009 20:08:15 +0000 (20:08 +0000)
Right now iPaq h3600's default MTD partitions table is a mess. It has
two #ifdefs with #else, giving total 3 variants, depending on your
kernel config. Replace all this with simple two-partitions scheme
(bootloader + rootfs), that used by both shipped WindowsCE and
most of the linux distributions (Familiar, Angstrom)

Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-sa1100/h3600.c

index b9aaa45c6ca44a38c99a21afa31ef9c87185e6d7..4920b89d149c7162ea8564d36b27923a8501d73e 100644 (file)
@@ -56,41 +56,9 @@ static struct mtd_partition h3xxx_partitions[] = {
                .offset         = 0,
                .mask_flags     = MTD_WRITEABLE,  /* force read-only */
        }, {
-#ifdef CONFIG_MTD_2PARTS_IPAQ
-               .name           = "H3XXX root jffs2",
+               .name           = "H3XXX rootfs",
                .size           = MTDPART_SIZ_FULL,
                .offset         = 0x00040000,
-#else
-               .name           = "H3XXX kernel",
-               .size           = 0x00080000,
-               .offset         = 0x00040000,
-       }, {
-               .name           = "H3XXX params",
-               .size           = 0x00040000,
-               .offset         = 0x000C0000,
-       }, {
-#ifdef CONFIG_JFFS2_FS
-               .name           = "H3XXX root jffs2",
-               .size           = MTDPART_SIZ_FULL,
-               .offset         = 0x00100000,
-#else
-               .name           = "H3XXX initrd",
-               .size           = 0x00100000,
-               .offset         = 0x00100000,
-       }, {
-               .name           = "H3XXX root cramfs",
-               .size           = 0x00300000,
-               .offset         = 0x00200000,
-       }, {
-               .name           = "H3XXX usr cramfs",
-               .size           = 0x00800000,
-               .offset         = 0x00500000,
-       }, {
-               .name           = "H3XXX usr local",
-               .size           = MTDPART_SIZ_FULL,
-               .offset         = 0x00d00000,
-#endif
-#endif
        }
 };