]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
ASoC: Convert WM8900 to allow registration by machine code
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 9 Dec 2008 12:51:56 +0000 (12:51 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 9 Dec 2008 13:30:05 +0000 (13:30 +0000)
This makes use of the support for delayed DAI registration to allow the
WM8900 I2C device to be registered by general platform/architecture code
rather than as part of the ASoC device probe.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
sound/soc/codecs/wm8900.c

index 02bb1c999ba19c586864f390d4605aad33292dc0..34e58af0c65a7d5bf99c0676644b1f2f4a27c7af 100644 (file)
@@ -1382,32 +1382,21 @@ priv_err:
        return ret;
 }
 
-static struct snd_soc_device *wm8900_socdev;
+static struct i2c_client *wm8900_client;
 
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
 static int wm8900_i2c_probe(struct i2c_client *i2c,
                            const struct i2c_device_id *id)
 {
-       struct snd_soc_device *socdev = wm8900_socdev;
-       struct snd_soc_codec *codec = socdev->codec;
-       int ret;
-
-       i2c_set_clientdata(i2c, codec);
-       codec->control_data = i2c;
-
-       ret = wm8900_init(socdev);
-       if (ret < 0)
-               dev_err(&i2c->dev, "failed to initialise WM8900\n");
-       return ret;
+       wm8900_client = i2c;
+       wm8900_dai.dev = &i2c->dev;
+       return snd_soc_register_dai(&wm8900_dai);
 }
 
 static int wm8900_i2c_remove(struct i2c_client *client)
 {
-       struct snd_soc_codec *codec = i2c_get_clientdata(client);
-       kfree(codec->reg_cache);
+       snd_soc_unregister_dai(&wm8900_dai);
+       wm8900_dai.dev = NULL;
+       wm8900_client = NULL;
        return 0;
 }
 
@@ -1427,57 +1416,17 @@ static struct i2c_driver wm8900_i2c_driver = {
        .id_table = wm8900_i2c_id,
 };
 
-static int wm8900_add_i2c_device(struct platform_device *pdev,
-                                const struct wm8900_setup_data *setup)
-{
-       struct i2c_board_info info;
-       struct i2c_adapter *adapter;
-       struct i2c_client *client;
-       int ret;
-
-       ret = i2c_add_driver(&wm8900_i2c_driver);
-       if (ret != 0) {
-               dev_err(&pdev->dev, "can't add i2c driver\n");
-               return ret;
-       }
-
-       memset(&info, 0, sizeof(struct i2c_board_info));
-       info.addr = setup->i2c_address;
-       strlcpy(info.type, "wm8900", I2C_NAME_SIZE);
-
-       adapter = i2c_get_adapter(setup->i2c_bus);
-       if (!adapter) {
-               dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-                       setup->i2c_bus);
-               goto err_driver;
-       }
-
-       client = i2c_new_device(adapter, &info);
-       i2c_put_adapter(adapter);
-       if (!client) {
-               dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-                       (unsigned int)info.addr);
-               goto err_driver;
-       }
-
-       return 0;
-
-err_driver:
-       i2c_del_driver(&wm8900_i2c_driver);
-       return -ENODEV;
-}
-#endif
-
 static int wm8900_probe(struct platform_device *pdev)
 {
        struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-       struct wm8900_setup_data *setup;
        struct snd_soc_codec *codec;
        int ret = 0;
 
-       dev_info(&pdev->dev, "WM8900 Audio Codec\n");
+       if (!wm8900_client) {
+               dev_err(&pdev->dev, "I2C client not yet instantiated\n");
+               return -ENODEV;
+       }
 
-       setup = socdev->codec_data;
        codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
        if (codec == NULL)
                return -ENOMEM;
@@ -1490,15 +1439,13 @@ static int wm8900_probe(struct platform_device *pdev)
 
        codec->set_bias_level = wm8900_set_bias_level;
 
-       wm8900_socdev = socdev;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-       if (setup->i2c_address) {
-               codec->hw_write = (hw_write_t)i2c_master_send;
-               ret = wm8900_add_i2c_device(pdev, setup);
-       }
-#else
-#error Non-I2C interfaces not yet supported
-#endif
+       codec->hw_write = (hw_write_t)i2c_master_send;
+       codec->control_data = wm8900_client;
+
+       ret = wm8900_init(socdev);
+       if (ret != 0)
+               kfree(codec);
+
        return ret;
 }
 
@@ -1513,10 +1460,6 @@ static int wm8900_remove(struct platform_device *pdev)
 
        snd_soc_free_pcms(socdev);
        snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-       i2c_unregister_device(codec->control_data);
-       i2c_del_driver(&wm8900_i2c_driver);
-#endif
        kfree(codec);
 
        return 0;
@@ -1532,13 +1475,13 @@ EXPORT_SYMBOL_GPL(soc_codec_dev_wm8900);
 
 static int __devinit wm8900_modinit(void)
 {
-       return snd_soc_register_dai(&wm8900_dai);
+       return i2c_add_driver(&wm8900_i2c_driver);
 }
 module_init(wm8900_modinit);
 
 static void __exit wm8900_exit(void)
 {
-       snd_soc_unregister_dai(&wm8900_dai);
+       i2c_del_driver(&wm8900_i2c_driver);
 }
 module_exit(wm8900_exit);