[PATCH] libata: implement ATA_EHI_PRINTINFO

Implement ehi flag ATA_EHI_PRINTINFO.  This flag is set when device
configuration needs to print out device info.  This used to be handled
by @print_info argument to ata_dev_configure() but LLDs also need to
know about it in ->dev_config() callback.

This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil
print workaround messages only on the initial configuration.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 315f46841f684b4f76516d0f9e31546edc427e50..e294731a7edd0827b7966d1737d827ff9379ee95 100644 (file)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1377,7 +1377,6 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
 /**
  *     ata_dev_configure - Configure the specified ATA/ATAPI device
  *     @dev: Target device to configure
- *     @print_info: Enable device info printout
  *
  *     Configure @dev according to @dev->id.  Generic and low-level
  *     driver specific fixups are also applied.
@@ -1388,9 +1387,10 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap)
  *     RETURNS:
  *     0 on success, -errno otherwise
  */
-int ata_dev_configure(struct ata_device *dev, int print_info)
+int ata_dev_configure(struct ata_device *dev)
 {
        struct ata_port *ap = dev->ap;
+       int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
        const u16 *id = dev->id;
        unsigned int xfer_mask;
        char revbuf[7];         /* XYZ-99\0 */
@@ -1638,7 +1638,9 @@ int ata_bus_probe(struct ata_port *ap)
                if (rc)
                        goto fail;
 
-               rc = ata_dev_configure(dev, 1);
+               ap->eh_context.i.flags |= ATA_EHI_PRINTINFO;
+               rc = ata_dev_configure(dev);
+               ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
                if (rc)
                        goto fail;
        }
@@ -3045,7 +3047,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset)
        memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
 
        /* configure device according to the new ID */
-       rc = ata_dev_configure(dev, 0);
+       rc = ata_dev_configure(dev);
        if (rc == 0)
                return 0;
 

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 02b2b2787d9b85a33a420fc77b5dc18aac7e29ad..7c446442616c3be5ee008ad30a0361c4cbc5ac19 100644 (file)
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1661,8 +1661,11 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
                        dev->class = ehc->classes[dev->devno];
 
                        rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
-                       if (rc == 0)
-                               rc = ata_dev_configure(dev, 1);
+                       if (rc == 0) {
+                               ehc->i.flags |= ATA_EHI_PRINTINFO;
+                               rc = ata_dev_configure(dev);
+                               ehc->i.flags &= ~ATA_EHI_PRINTINFO;
+                       }
 
                        if (rc) {
                                dev->class = ATA_DEV_UNKNOWN;

diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index c83300055ec5a28a5dcdbf228104f99d3825947e..e4ffb2e38992f1520114fd8f862ca9a4acc249ff 100644 (file)
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -54,7 +54,7 @@ extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
                           int post_reset, u16 *id);
 extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
-extern int ata_dev_configure(struct ata_device *dev, int print_info);
+extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);
 extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index ca8d9931247239c6f83bef81df18f8ec48ddf88e..f844a1faba181a164a9289be4758218bbe66037d 100644 (file)
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -534,6 +534,7 @@ static void sil_thaw(struct ata_port *ap)
  */
 static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
 {
+       int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
        unsigned int n, quirks = 0;
        unsigned char model_num[41];
 
@@ -549,16 +550,18 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
        if (slow_down ||
            ((ap->flags & SIL_FLAG_MOD15WRITE) &&
             (quirks & SIL_QUIRK_MOD15WRITE))) {
-               ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
-                              "(mod15write workaround)\n");
+               if (print_info)
+                       ata_dev_printk(dev, KERN_INFO, "applying Seagate "
+                                      "errata fix (mod15write workaround)\n");
                dev->max_sectors = 15;
                return;
        }
 
        /* limit to udma5 */
        if (quirks & SIL_QUIRK_UDMA5MAX) {
-               ata_dev_printk(dev, KERN_INFO,
-                              "applying Maxtor errata fix %s\n", model_num);
+               if (print_info)
+                       ata_dev_printk(dev, KERN_INFO, "applying Maxtor "
+                                      "errata fix %s\n", model_num);
                dev->udma_mask &= ATA_UDMA5;
                return;
        }

diff --git a/include/linux/libata.h b/include/linux/libata.h
index 41fa0890dbfb94e8761afaa9972be066241962a6..949484627e67d107417b1b8fb7555afcb3f9dd39 100644 (file)
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -283,6 +283,7 @@ enum {
        ATA_EHI_QUIET           = (1 << 3),  /* be quiet */
 
        ATA_EHI_DID_RESET       = (1 << 16), /* already reset this port */
+       ATA_EHI_PRINTINFO       = (1 << 17), /* print configuration info */
 
        ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,