[POWERPC] Xilinx: hwicap: update booting-without-of.txt

The ICAP device in Xilinx FPGAs differs slightly between different
FPGAs.  The driver needs an additional attribute in the device tree to
distinguish this.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b5e46efeba84bd3715cfea3cf5d4c84be6010332..2efea2d497f8ed86f1dffbeb2f5859610ac38fe9 100644 (file)
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2577,6 +2577,20 @@ platforms are moved over to use the flattened-device-tree model.
       Requred properties:
        - current-speed : Baud rate of uartlite
 
+      v) Xilinx hwicap
+
+               Xilinx hwicap devices provide access to the configuration logic
+               of the FPGA through the Internal Configuration Access Port
+               (ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+               readback of the configuration information, and some control over
+               'warm boots' of the FPGA fabric.
+
+               Required properties:
+               - xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
     p) Freescale Synchronous Serial Interface
 
        The SSI is a serial device that communicates with audio codecs.  It can