* option) any later version.
*/
+/dts-v1/;
+
/ {
model = "MPC8349EMDS";
compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
PowerPC,8349@0 {
device_type = "cpu";
reg = <0>;
- d-cache-line-size = <20>; // 32 bytes
- i-cache-line-size = <20>; // 32 bytes
- d-cache-size = <8000>; // L1, 32K
- i-cache-size = <8000>; // L1, 32K
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <32768>;
+ i-cache-size = <32768>;
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
memory {
device_type = "memory";
- reg = <00000000 10000000>; // 256MB at 0
+ reg = <0x00000000 0x10000000>; // 256MB at 0
};
bcsr@e2400000 {
device_type = "board-control";
- reg = <e2400000 8000>;
+ reg = <0xe2400000 0x8000>;
};
soc8349@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00000200>;
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
- reg = <200 100>;
+ reg = <0x200 0x100>;
};
i2c@3000 {
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
- reg = <3000 100>;
- interrupts = <e 8>;
- interrupt-parent = < &ipic >;
+ reg = <0x3000 0x100>;
+ interrupts = <14 8>;
+ interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1374";
- reg = <68>;
+ reg = <0x68>;
};
};
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
- reg = <3100 100>;
- interrupts = <f 8>;
- interrupt-parent = < &ipic >;
+ reg = <0x3100 0x100>;
+ interrupts = <15 8>;
+ interrupt-parent = <&ipic>;
dfsrr;
};
spi@7000 {
device_type = "spi";
compatible = "fsl_spi";
- reg = <7000 1000>;
- interrupts = <10 8>;
- interrupt-parent = < &ipic >;
+ reg = <0x7000 0x1000>;
+ interrupts = <16 8>;
+ interrupt-parent = <&ipic>;
mode = "cpu";
};
- /* phy type (ULPI or SERIAL) are only types supportted for MPH */
+ /* phy type (ULPI or SERIAL) are only types supported for MPH */
/* port = 0 or 1 */
usb@22000 {
compatible = "fsl-usb2-mph";
- reg = <22000 1000>;
+ reg = <0x22000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = < &ipic >;
- interrupts = <27 8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <39 8>;
phy_type = "ulpi";
port1;
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
- reg = <23000 1000>;
+ reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = < &ipic >;
- interrupts = <26 8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
- reg = <24520 20>;
+ reg = <0x24520 0x20>;
phy0: ethernet-phy@0 {
- interrupt-parent = < &ipic >;
- interrupts = <11 8>;
- reg = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <17 8>;
+ reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
- interrupt-parent = < &ipic >;
- interrupts = <12 8>;
- reg = <1>;
+ interrupt-parent = <&ipic>;
+ interrupts = <18 8>;
+ reg = <0x1>;
device_type = "ethernet-phy";
};
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <24000 1000>;
+ reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <20 8 21 8 22 8>;
- interrupt-parent = < &ipic >;
- phy-handle = < &phy0 >;
+ interrupts = <32 8 33 8 34 8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy0>;
linux,network-index = <0>;
};
device_type = "network";
model = "TSEC";
compatible = "gianfar";
- reg = <25000 1000>;
+ reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <23 8 24 8 25 8>;
- interrupt-parent = < &ipic >;
- phy-handle = < &phy1 >;
+ interrupts = <35 8 36 8 37 8>;
+ interrupt-parent = <&ipic>;
+ phy-handle = <&phy1>;
linux,network-index = <1>;
};
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
- reg = <4500 100>;
+ reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = < &ipic >;
+ interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
- reg = <4600 100>;
+ reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <a 8>;
- interrupt-parent = < &ipic >;
+ interrupts = <10 8>;
+ interrupt-parent = <&ipic>;
};
/* May need to remove if on a part without crypto engine */
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
- reg = <30000 10000>;
- interrupts = <b 8>;
- interrupt-parent = < &ipic >;
+ reg = <0x30000 0x10000>;
+ interrupts = <11 8>;
+ interrupt-parent = <&ipic>;
num-channels = <4>;
- channel-fifo-len = <18>;
- exec-units-mask = <0000007e>;
+ channel-fifo-len = <0x18>;
+ exec-units-mask = <0x0000007e>;
/* desc mask is for rev2.0,
* we need runtime fixup for >2.0 */
- descriptor-types-mask = <01010ebf>;
+ descriptor-types-mask = <0x01010ebf>;
};
/* IPIC
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <700 100>;
+ reg = <0x700 0x100>;
device_type = "ipic";
};
};
pci0: pci@e0008500 {
cell-index = <1>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
+ 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x12 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
+ 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+ 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+ 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+ 0x9000 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x13 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
+ 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+ 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+ 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+ 0x9800 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x15 */
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
+ 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+ 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+ 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+ 0xa800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x16 */
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
+ 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+ 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+ 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+ 0xb000 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x17 */
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
+ 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+ 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+ 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+ 0xb800 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x18 */
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
+ 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+ 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+ 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+ 0xc000 0x0 0x0 0x4 &ipic 20 8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 8>;
bus-range = <0 0>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 42000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008500 100>;
+ reg = <0xe0008500 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
pci1: pci@e0008600 {
cell-index = <2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 &ipic 14 8
- 8800 0 0 2 &ipic 15 8
- 8800 0 0 3 &ipic 16 8
- 8800 0 0 4 &ipic 17 8
+ 0x8800 0x0 0x0 0x1 &ipic 20 0x8
+ 0x8800 0x0 0x0 0x2 &ipic 21 0x8
+ 0x8800 0x0 0x0 0x3 &ipic 22 0x8
+ 0x8800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x12 */
- 9000 0 0 1 &ipic 16 8
- 9000 0 0 2 &ipic 17 8
- 9000 0 0 3 &ipic 14 8
- 9000 0 0 4 &ipic 15 8
+ 0x9000 0x0 0x0 0x1 &ipic 22 0x8
+ 0x9000 0x0 0x0 0x2 &ipic 23 0x8
+ 0x9000 0x0 0x0 0x3 &ipic 20 0x8
+ 0x9000 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x13 */
- 9800 0 0 1 &ipic 17 8
- 9800 0 0 2 &ipic 14 8
- 9800 0 0 3 &ipic 15 8
- 9800 0 0 4 &ipic 16 8
+ 0x9800 0x0 0x0 0x1 &ipic 23 0x8
+ 0x9800 0x0 0x0 0x2 &ipic 20 0x8
+ 0x9800 0x0 0x0 0x3 &ipic 21 0x8
+ 0x9800 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x15 */
- a800 0 0 1 &ipic 14 8
- a800 0 0 2 &ipic 15 8
- a800 0 0 3 &ipic 16 8
- a800 0 0 4 &ipic 17 8
+ 0xa800 0x0 0x0 0x1 &ipic 20 0x8
+ 0xa800 0x0 0x0 0x2 &ipic 21 0x8
+ 0xa800 0x0 0x0 0x3 &ipic 22 0x8
+ 0xa800 0x0 0x0 0x4 &ipic 23 0x8
/* IDSEL 0x16 */
- b000 0 0 1 &ipic 17 8
- b000 0 0 2 &ipic 14 8
- b000 0 0 3 &ipic 15 8
- b000 0 0 4 &ipic 16 8
+ 0xb000 0x0 0x0 0x1 &ipic 23 0x8
+ 0xb000 0x0 0x0 0x2 &ipic 20 0x8
+ 0xb000 0x0 0x0 0x3 &ipic 21 0x8
+ 0xb000 0x0 0x0 0x4 &ipic 22 0x8
/* IDSEL 0x17 */
- b800 0 0 1 &ipic 16 8
- b800 0 0 2 &ipic 17 8
- b800 0 0 3 &ipic 14 8
- b800 0 0 4 &ipic 15 8
+ 0xb800 0x0 0x0 0x1 &ipic 22 0x8
+ 0xb800 0x0 0x0 0x2 &ipic 23 0x8
+ 0xb800 0x0 0x0 0x3 &ipic 20 0x8
+ 0xb800 0x0 0x0 0x4 &ipic 21 0x8
/* IDSEL 0x18 */
- c000 0 0 1 &ipic 15 8
- c000 0 0 2 &ipic 16 8
- c000 0 0 3 &ipic 17 8
- c000 0 0 4 &ipic 14 8>;
- interrupt-parent = < &ipic >;
- interrupts = <42 8>;
+ 0xc000 0x0 0x0 0x1 &ipic 21 0x8
+ 0xc000 0x0 0x0 0x2 &ipic 22 0x8
+ 0xc000 0x0 0x0 0x3 &ipic 23 0x8
+ 0xc000 0x0 0x0 0x4 &ipic 20 8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 8>;
bus-range = <0 0>;
- ranges = <02000000 0 b0000000 b0000000 0 10000000
- 42000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2100000 0 00100000>;
- clock-frequency = <3f940aa>;
+ ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+ 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <e0008600 100>;
+ reg = <0xe0008600 0x100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
projects / linux-2.6-omap-h63xx.git / commitdiff