]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[MTD] chips: make sharps driver usable again
authorRichard Purdie <rpurdie@rpsys.net>
Tue, 29 Nov 2005 14:28:31 +0000 (14:28 +0000)
committerThomas Gleixner <tglx@mtd.linutronix.de>
Tue, 29 Nov 2005 18:49:03 +0000 (19:49 +0100)
Update the pre-CFI Sharp driver sharps.c so it compiles.  map_read32 /
map_write32 no longer exist in the kernel so the driver is totally broken
as it stands.  The replacement functions use different parameters resulting
in the other changes.

Change collie to use this driver until someone works out why the cfi driver
fails on that machine.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Tested-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
drivers/mtd/chips/sharp.c

index 2d26bdef82d5c9fe4fe64ad4406719edcb5b12c0..36f61a6a766e64b1421cb5d0c11a660a2924d33c 100644 (file)
@@ -4,7 +4,7 @@
  * Copyright 2000,2001 David A. Schleef <ds@schleef.org>
  *           2000,2001 Lineo, Inc.
  *
- * $Id: sharp.c,v 1.16 2005/11/07 11:14:23 gleixner Exp $
+ * $Id: sharp.c,v 1.17 2005/11/29 14:28:28 gleixner Exp $
  *
  * Devices supported:
  *   LH28F016SCT Symmetrical block flash memory, 2Mx8
@@ -160,22 +160,28 @@ struct mtd_info *sharp_probe(struct map_info *map)
        return mtd;
 }
 
+static inline void sharp_send_cmd(struct map_info *map, unsigned long cmd, unsigned long adr)
+{
+       map_word map_cmd;
+       map_cmd.x[0] = cmd;
+       map_write(map, map_cmd, adr);
+}
+
 static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
 {
-       unsigned long tmp;
+       map_word tmp, read0, read4;
        unsigned long base = 0;
-       u32 read0, read4;
        int width = 4;
 
-       tmp = map_read32(map, base+0);
+       tmp = map_read(map, base+0);
 
-       map_write32(map, CMD_READ_ID, base+0);
+       sharp_send_cmd(map, CMD_READ_ID, base+0);
 
-       read0=map_read32(map, base+0);
-       read4=map_read32(map, base+4);
-       if(read0 == 0x89898989){
+       read0 = map_read(map, base+0);
+       read4 = map_read(map, base+4);
+       if(read0.x[0] == 0x89898989){
                printk("Looks like sharp flash\n");
-               switch(read4){
+               switch(read4.x[0]){
                case 0xaaaaaaaa:
                case 0xa0a0a0a0:
                        /* aa - LH28F016SCT-L95 2Mx8, 32 64k blocks*/
@@ -197,16 +203,16 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
                        return width;
 #endif
                default:
-                       printk("Sort-of looks like sharp flash, 0x%08x 0x%08x\n",
-                               read0,read4);
+                       printk("Sort-of looks like sharp flash, 0x%08lx 0x%08lx\n",
+                               read0.x[0], read4.x[0]);
                }
-       }else if((map_read32(map, base+0) == CMD_READ_ID)){
+       }else if((map_read(map, base+0).x[0] == CMD_READ_ID)){
                /* RAM, probably */
                printk("Looks like RAM\n");
-               map_write32(map, tmp, base+0);
+               map_write(map, tmp, base+0);
        }else{
-               printk("Doesn't look like sharp flash, 0x%08x 0x%08x\n",
-                       read0,read4);
+               printk("Doesn't look like sharp flash, 0x%08lx 0x%08lx\n",
+                       read0.x[0], read4.x[0]);
        }
 
        return 0;
@@ -215,7 +221,8 @@ static int sharp_probe_map(struct map_info *map,struct mtd_info *mtd)
 /* This function returns with the chip->mutex lock held. */
 static int sharp_wait(struct map_info *map, struct flchip *chip)
 {
-       int status, i;
+       int i;
+       map_word status;
        unsigned long timeo = jiffies + HZ;
        DECLARE_WAITQUEUE(wait, current);
        int adr = 0;
@@ -225,12 +232,12 @@ retry:
 
        switch(chip->state){
        case FL_READY:
-               map_write32(map,CMD_READ_STATUS,adr);
+               sharp_send_cmd(map, CMD_READ_STATUS, adr);
                chip->state = FL_STATUS;
        case FL_STATUS:
                for(i=0;i<100;i++){
-                       status = map_read32(map,adr);
-                       if((status & SR_READY)==SR_READY)
+                       status = map_read(map, adr);
+                       if((status.x[0] & SR_READY)==SR_READY)
                                break;
                        udelay(1);
                }
@@ -254,7 +261,7 @@ retry:
                goto retry;
        }
 
-       map_write32(map,CMD_RESET, adr);
+       sharp_send_cmd(map, CMD_RESET, adr);
 
        chip->state = FL_READY;
 
@@ -351,37 +358,39 @@ static int sharp_write_oneword(struct map_info *map, struct flchip *chip,
        int timeo;
        int try;
        int i;
-       int status = 0;
+       map_word data, status;
 
+       status.x[0] = 0;
        ret = sharp_wait(map,chip);
 
        for(try=0;try<10;try++){
-               map_write32(map,CMD_BYTE_WRITE,adr);
+               sharp_send_cmd(map, CMD_BYTE_WRITE, adr);
                /* cpu_to_le32 -> hack to fix the writel be->le conversion */
-               map_write32(map,cpu_to_le32(datum),adr);
+               data.x[0] = cpu_to_le32(datum);
+               map_write(map, data, adr);
 
                chip->state = FL_WRITING;
 
                timeo = jiffies + (HZ/2);
 
-               map_write32(map,CMD_READ_STATUS,adr);
+               sharp_send_cmd(map, CMD_READ_STATUS, adr);
                for(i=0;i<100;i++){
-                       status = map_read32(map,adr);
-                       if((status & SR_READY)==SR_READY)
+                       status = map_read(map, adr);
+                       if((status.x[0] & SR_READY) == SR_READY)
                                break;
                }
                if(i==100){
                        printk("sharp: timed out writing\n");
                }
 
-               if(!(status&SR_ERRORS))
+               if(!(status.x[0] & SR_ERRORS))
                        break;
 
-               printk("sharp: error writing byte at addr=%08lx status=%08x\n",adr,status);
+               printk("sharp: error writing byte at addr=%08lx status=%08lx\n", adr, status.x[0]);
 
-               map_write32(map,CMD_CLEAR_STATUS,adr);
+               sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
        }
-       map_write32(map,CMD_RESET,adr);
+       sharp_send_cmd(map, CMD_RESET, adr);
        chip->state = FL_READY;
 
        wake_up(&chip->wq);
@@ -434,18 +443,18 @@ static int sharp_do_wait_for_ready(struct map_info *map, struct flchip *chip,
 {
        int ret;
        unsigned long timeo;
-       int status;
+       map_word status;
        DECLARE_WAITQUEUE(wait, current);
 
-       map_write32(map,CMD_READ_STATUS,adr);
-       status = map_read32(map,adr);
+       sharp_send_cmd(map, CMD_READ_STATUS, adr);
+       status = map_read(map, adr);
 
        timeo = jiffies + HZ;
 
        while(time_before(jiffies, timeo)){
-               map_write32(map,CMD_READ_STATUS,adr);
-               status = map_read32(map,adr);
-               if((status & SR_READY)==SR_READY){
+               sharp_send_cmd(map, CMD_READ_STATUS, adr);
+               status = map_read(map, adr);
+               if((status.x[0] & SR_READY)==SR_READY){
                        ret = 0;
                        goto out;
                }
@@ -476,7 +485,7 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
 {
        int ret;
        //int timeo;
-       int status;
+       map_word status;
        //int i;
 
 //printk("sharp_erase_oneblock()\n");
@@ -486,26 +495,26 @@ static int sharp_erase_oneblock(struct map_info *map, struct flchip *chip,
        sharp_unlock_oneblock(map,chip,adr);
 #endif
 
-       map_write32(map,CMD_BLOCK_ERASE_1,adr);
-       map_write32(map,CMD_BLOCK_ERASE_2,adr);
+       sharp_send_cmd(map, CMD_BLOCK_ERASE_1, adr);
+       sharp_send_cmd(map, CMD_BLOCK_ERASE_2, adr);
 
        chip->state = FL_ERASING;
 
        ret = sharp_do_wait_for_ready(map,chip,adr);
        if(ret<0)return ret;
 
-       map_write32(map,CMD_READ_STATUS,adr);
-       status = map_read32(map,adr);
+       sharp_send_cmd(map, CMD_READ_STATUS, adr);
+       status = map_read(map, adr);
 
-       if(!(status&SR_ERRORS)){
-               map_write32(map,CMD_RESET,adr);
+       if(!(status.x[0] & SR_ERRORS)){
+               sharp_send_cmd(map, CMD_RESET, adr);
                chip->state = FL_READY;
                //spin_unlock_bh(chip->mutex);
                return 0;
        }
 
-       printk("sharp: error erasing block at addr=%08lx status=%08x\n",adr,status);
-       map_write32(map,CMD_CLEAR_STATUS,adr);
+       printk("sharp: error erasing block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+       sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
 
        //spin_unlock_bh(chip->mutex);
 
@@ -517,20 +526,20 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
        unsigned long adr)
 {
        int i;
-       int status;
+       map_word status;
 
-       map_write32(map,CMD_CLEAR_BLOCK_LOCKS_1,adr);
-       map_write32(map,CMD_CLEAR_BLOCK_LOCKS_2,adr);
+       sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_1, adr);
+       sharp_send_cmd(map, CMD_CLEAR_BLOCK_LOCKS_2, adr);
 
        udelay(100);
 
-       status = map_read32(map,adr);
-       printk("status=%08x\n",status);
+       status = map_read(map, adr);
+       printk("status=%08lx\n", status.x[0]);
 
        for(i=0;i<1000;i++){
-               //map_write32(map,CMD_READ_STATUS,adr);
-               status = map_read32(map,adr);
-               if((status & SR_READY)==SR_READY)
+               //sharp_send_cmd(map, CMD_READ_STATUS, adr);
+               status = map_read(map, adr);
+               if((status.x[0] & SR_READY) == SR_READY)
                        break;
                udelay(100);
        }
@@ -538,14 +547,14 @@ static void sharp_unlock_oneblock(struct map_info *map, struct flchip *chip,
                printk("sharp: timed out unlocking block\n");
        }
 
-       if(!(status&SR_ERRORS)){
-               map_write32(map,CMD_RESET,adr);
+       if(!(status.x[0] & SR_ERRORS)){
+               sharp_send_cmd(map, CMD_RESET, adr);
                chip->state = FL_READY;
                return;
        }
 
-       printk("sharp: error unlocking block at addr=%08lx status=%08x\n",adr,status);
-       map_write32(map,CMD_CLEAR_STATUS,adr);
+       printk("sharp: error unlocking block at addr=%08lx status=%08lx\n", adr, status.x[0]);
+       sharp_send_cmd(map, CMD_CLEAR_STATUS, adr);
 }
 #endif