]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
mfd: driver for the TMIO NAND controller
authorIan Molton <spyro@f2s.com>
Tue, 15 Jul 2008 15:04:22 +0000 (16:04 +0100)
committerSamuel Ortiz <sameo@openedhand.com>
Sun, 10 Aug 2008 21:30:09 +0000 (23:30 +0200)
This patch adds support for the NAND controller commonly found in
TMIO based MFDs.

Signed-off-by: Ian Molton <spyro@f2s.com>
Acked-By: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
drivers/mtd/nand/Kconfig
drivers/mtd/nand/Makefile
drivers/mtd/nand/tmio_nand.c [new file with mode: 0644]

index 02f9cc30d77b70b5f89c01f5e6194999da4b1ceb..fd6debb242523cfcffbd39a5767c7b6885128736 100644 (file)
@@ -351,6 +351,13 @@ config MTD_NAND_PASEMI
          Enables support for NAND Flash interface on PA Semi PWRficient
          based boards
 
+config MTD_NAND_TMIO
+       tristate "NAND Flash device on Toshiba Mobile IO Controller"
+       depends on MTD_NAND && MFD_CORE
+       help
+         Support for NAND flash connected to a Toshiba Mobile IO
+         Controller in some PDAs, including the Sharp SL6000x.
+
 config MTD_NAND_NANDSIM
        tristate "Support for NAND Flash Simulator"
        depends on MTD_PARTITIONS
index d772581de573cf4281e64cf11598e234ca2dd6e7..b786c5da82da227fe388bf468c6dc370caee49ea 100644 (file)
@@ -27,6 +27,7 @@ obj-$(CONFIG_MTD_NAND_ATMEL)          += atmel_nand.o
 obj-$(CONFIG_MTD_NAND_CM_X270)         += cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)   += excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)          += pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO)            += tmio_nand.o
 obj-$(CONFIG_MTD_NAND_PLATFORM)                += plat_nand.o
 obj-$(CONFIG_MTD_ALAUDA)               += alauda.o
 obj-$(CONFIG_MTD_NAND_PASEMI)          += pasemi_nand.o
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644 (file)
index 0000000..cbab654
--- /dev/null
@@ -0,0 +1,556 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ *    Modifications developed from sharps code but
+ *    NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ *    Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND    0x04    /* w Command                            */
+#define CCR_BASE       0x10    /* l NAND Flash Control Reg Base Addr   */
+#define CCR_INTP       0x3d    /* b Interrupt Pin                      */
+#define CCR_INTE       0x48    /* b Interrupt Enable                   */
+#define CCR_EC         0x4a    /* b Event Control                      */
+#define CCR_ICC                0x4c    /* b Internal Clock Control             */
+#define CCR_ECCC       0x5b    /* b ECC Control                        */
+#define CCR_NFTC       0x60    /* b NAND Flash Transaction Control     */
+#define CCR_NFM                0x61    /* b NAND Flash Monitor                 */
+#define CCR_NFPSC      0x62    /* b NAND Flash Power Supply Control    */
+#define CCR_NFDC       0x63    /* b NAND Flash Detect Control          */
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA       0x00    /* bwl Data Register                    */
+#define FCR_MODE       0x04    /* b Mode Register                      */
+#define FCR_STATUS     0x05    /* b Status Register                    */
+#define FCR_ISR                0x06    /* b Interrupt Status Register          */
+#define FCR_IMR                0x07    /* b Interrupt Mask Register            */
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA  0x94    /* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95  /* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96  /* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC    0xB4    /* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT  0xD4    /* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET   0xF4    /* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON      0x0C    /* Power Supply ON  to SSFDC card */
+#define FCR_MODE_POWER_OFF     0x08    /* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF       0x00    /* LED OFF */
+#define FCR_MODE_LED_ON                0x04    /* LED ON */
+
+#define FCR_MODE_EJECT_ON      0x68    /* Ejection events active  */
+#define FCR_MODE_EJECT_OFF     0x08    /* Ejection events ignored */
+
+#define FCR_MODE_LOCK          0x6C    /* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK                0x0C    /* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID 0x40    /* Controller ID Read */
+#define FCR_MODE_STANDBY       0x00    /* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE            0x80
+#define FCR_MODE_ECC1          0x40
+#define FCR_MODE_ECC0          0x20
+#define FCR_MODE_CE            0x10
+#define FCR_MODE_PCNT1         0x08
+#define FCR_MODE_PCNT0         0x04
+#define FCR_MODE_ALE           0x02
+#define FCR_MODE_CLE           0x01
+
+#define FCR_STATUS_BUSY                0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+       struct mtd_info mtd;
+       struct nand_chip chip;
+
+       struct platform_device *dev;
+
+       void __iomem *ccr;
+       void __iomem *fcr;
+       unsigned long fcr_phys;
+
+       unsigned int irq;
+
+       /* for tmio_nand_read_byte */
+       u8                      read;
+       unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m)                 container_of(m, struct tmio_nand, mtd)
+
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+static const char *part_probes[] = { "cmdlinepart", NULL };
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+                                  unsigned int ctrl)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+       struct nand_chip *chip = mtd->priv;
+
+       if (ctrl & NAND_CTRL_CHANGE) {
+               u8 mode;
+
+               if (ctrl & NAND_NCE) {
+                       mode = FCR_MODE_DATA;
+
+                       if (ctrl & NAND_CLE)
+                               mode |=  FCR_MODE_CLE;
+                       else
+                               mode &= ~FCR_MODE_CLE;
+
+                       if (ctrl & NAND_ALE)
+                               mode |=  FCR_MODE_ALE;
+                       else
+                               mode &= ~FCR_MODE_ALE;
+               } else {
+                       mode = FCR_MODE_STANDBY;
+               }
+
+               tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+               tmio->read_good = 0;
+       }
+
+       if (cmd != NAND_CMD_NONE)
+               tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+       return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+       struct tmio_nand *tmio = __tmio;
+       struct nand_chip *nand_chip = &tmio->chip;
+
+       /* disable RDYREQ interrupt */
+       tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+       if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+               dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+       wake_up(&nand_chip->controller->wq);
+       return IRQ_HANDLED;
+}
+
+/*
+  *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+  *This interrupt is normally disabled, but for long operations like
+  *erase and write, we enable it to wake us up.  The irq handler
+  *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+       long timeout;
+
+       /* enable RDYREQ interrupt */
+       tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+       tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+       timeout = wait_event_timeout(nand_chip->controller->wq,
+               tmio_nand_dev_ready(mtd),
+               msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+       if (unlikely(!tmio_nand_dev_ready(mtd))) {
+               tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+               dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+                       nand_chip->state == FL_ERASING ? "erase" : "program",
+                       nand_chip->state == FL_ERASING ? 400 : 20);
+
+       } else if (unlikely(!timeout)) {
+               tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+               dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+       }
+
+       nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+       return nand_chip->read_byte(mtd);
+}
+
+/*
+  *The TMIO controller combines two 8-bit data bytes into one 16-bit
+  *word. This function separates them so nand_base.c works as expected,
+  *especially its NAND_CMD_READID routines.
+ *
+  *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+  *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+       unsigned int data;
+
+       if (tmio->read_good--)
+               return tmio->read;
+
+       data = tmio_ioread16(tmio->fcr + FCR_DATA);
+       tmio->read = data >> 8;
+       return data;
+}
+
+/*
+  *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+  *bus interface, so all data reads and writes must be 16-bit wide.
+  *Thus, we implement 16-bit versions of the read, write, and verify
+  *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+       tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+       tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static int
+tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+       u16                             *p = (u16 *) buf;
+
+       for (len >>= 1; len; len--)
+               if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA))
+                       return -EFAULT;
+       return 0;
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+       tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+       tmio_ioread8(tmio->fcr + FCR_DATA);     /* dummy read */
+       tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+                                                       u_char *ecc_code)
+{
+       struct tmio_nand *tmio = mtd_to_tmio(mtd);
+       unsigned int ecc;
+
+       tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+       ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+       ecc_code[1] = ecc;      /* 000-255 LP7-0 */
+       ecc_code[0] = ecc >> 8; /* 000-255 LP15-8 */
+       ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+       ecc_code[2] = ecc;      /* 000-255 CP5-0,11b */
+       ecc_code[4] = ecc >> 8; /* 256-511 LP7-0 */
+       ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+       ecc_code[3] = ecc;      /* 256-511 LP15-8 */
+       ecc_code[5] = ecc >> 8; /* 256-511 CP5-0,11b */
+
+       tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+       return 0;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+       struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+       int ret;
+
+       if (cell->enable) {
+               ret = cell->enable(dev);
+               if (ret)
+                       return ret;
+       }
+
+       /* (4Ch) CLKRUN Enable    1st spcrunc */
+       tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+       /* (10h)BaseAddress    0x1000 spba.spba2 */
+       tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
+       tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+
+       /* (04h)Command Register I/O spcmd */
+       tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+       /* (62h) Power Supply Control ssmpwc */
+       /* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+       tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+       /* (63h) Detect Control ssmdtc */
+       tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+       /* Interrupt status register clear sintst */
+       tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+       /* After power supply, Media are reset smode */
+       tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+       tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+       tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+       /* Standby Mode smode */
+       tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+       mdelay(5);
+
+       return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+       struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+       tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+       if (cell->disable)
+               cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+       struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+       struct tmio_nand_data *data = cell->driver_data;
+       struct resource *fcr = platform_get_resource(dev,
+                       IORESOURCE_MEM, 0);
+       struct resource *ccr = platform_get_resource(dev,
+                       IORESOURCE_MEM, 1);
+       int irq = platform_get_irq(dev, 0);
+       struct tmio_nand *tmio;
+       struct mtd_info *mtd;
+       struct nand_chip *nand_chip;
+#ifdef CONFIG_MTD_PARTITIONS
+       struct mtd_partition *parts;
+       int nbparts = 0;
+#endif
+       int retval;
+
+       if (data == NULL)
+               dev_warn(&dev->dev, "NULL platform data!\n");
+
+       tmio = kzalloc(sizeof *tmio, GFP_KERNEL);
+       if (!tmio) {
+               retval = -ENOMEM;
+               goto err_kzalloc;
+       }
+
+       tmio->dev = dev;
+
+       platform_set_drvdata(dev, tmio);
+       mtd = &tmio->mtd;
+       nand_chip = &tmio->chip;
+       mtd->priv = nand_chip;
+       mtd->name = "tmio-nand";
+
+       tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+       if (!tmio->ccr) {
+               retval = -EIO;
+               goto err_iomap_ccr;
+       }
+
+       tmio->fcr_phys = (unsigned long)fcr->start;
+       tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+       if (!tmio->fcr) {
+               retval = -EIO;
+               goto err_iomap_fcr;
+       }
+
+       retval = tmio_hw_init(dev, tmio);
+       if (retval)
+               goto err_hwinit;
+
+       /* Set address of NAND IO lines */
+       nand_chip->IO_ADDR_R = tmio->fcr;
+       nand_chip->IO_ADDR_W = tmio->fcr;
+
+       /* Set address of hardware control function */
+       nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+       nand_chip->dev_ready = tmio_nand_dev_ready;
+       nand_chip->read_byte = tmio_nand_read_byte;
+       nand_chip->write_buf = tmio_nand_write_buf;
+       nand_chip->read_buf = tmio_nand_read_buf;
+       nand_chip->verify_buf = tmio_nand_verify_buf;
+
+       /* set eccmode using hardware ECC */
+       nand_chip->ecc.mode = NAND_ECC_HW;
+       nand_chip->ecc.size = 512;
+       nand_chip->ecc.bytes = 6;
+       nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+       nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+       nand_chip->ecc.correct = nand_correct_data;
+
+       if (data)
+               nand_chip->badblock_pattern = data->badblock_pattern;
+
+       /* 15 us command delay time */
+       nand_chip->chip_delay = 15;
+
+       retval = request_irq(irq, &tmio_irq,
+                               IRQF_DISABLED, dev->dev.bus_id, tmio);
+       if (retval) {
+               dev_err(&dev->dev, "request_irq error %d\n", retval);
+               goto err_irq;
+       }
+
+       tmio->irq = irq;
+       nand_chip->waitfunc = tmio_nand_wait;
+
+       /* Scan to find existence of the device */
+       if (nand_scan(mtd, 1)) {
+               retval = -ENODEV;
+               goto err_scan;
+       }
+       /* Register the partitions */
+#ifdef CONFIG_MTD_PARTITIONS
+#ifdef CONFIG_MTD_CMDLINE_PARTS
+       nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0);
+#endif
+       if (nbparts <= 0 && data) {
+               parts = data->partition;
+               nbparts = data->num_partitions;
+       }
+
+       if (nbparts)
+               retval = add_mtd_partitions(mtd, parts, nbparts);
+       else
+#endif
+       retval = add_mtd_device(mtd);
+
+       if (!retval)
+               return retval;
+
+       nand_release(mtd);
+
+err_scan:
+       if (tmio->irq)
+               free_irq(tmio->irq, tmio);
+err_irq:
+       tmio_hw_stop(dev, tmio);
+err_hwinit:
+       iounmap(tmio->fcr);
+err_iomap_fcr:
+       iounmap(tmio->ccr);
+err_iomap_ccr:
+       kfree(tmio);
+err_kzalloc:
+       return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+       struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+       nand_release(&tmio->mtd);
+       if (tmio->irq)
+               free_irq(tmio->irq, tmio);
+       tmio_hw_stop(dev, tmio);
+       iounmap(tmio->fcr);
+       iounmap(tmio->ccr);
+       kfree(tmio);
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+       struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+       if (cell->suspend)
+               cell->suspend(dev);
+
+       tmio_hw_stop(dev, platform_get_drvdata(dev));
+       return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+       struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+
+       /* FIXME - is this required or merely another attack of the broken
+        * SHARP platform? Looks suspicious.
+        */
+       tmio_hw_init(dev, platform_get_drvdata(dev));
+
+       if (cell->resume)
+               cell->resume(dev);
+
+       return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+       .driver.name    = "tmio-nand",
+       .driver.owner   = THIS_MODULE,
+       .probe          = tmio_probe,
+       .remove         = tmio_remove,
+       .suspend        = tmio_suspend,
+       .resume         = tmio_resume,
+};
+
+static int __init tmio_init(void)
+{
+       return platform_driver_register(&tmio_driver);
+}
+
+static void __exit tmio_exit(void)
+{
+       platform_driver_unregister(&tmio_driver);
+}
+
+module_init(tmio_init);
+module_exit(tmio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");