Char: moxa, little cleanup

Cleanup of
- whitespace
- macros
- useless casts
- return (sth); -> return sth;
- types
- superfluous parenthesis and braces
- init tmp directly in moxa_get_serial_info
- commented defunct code
- commented prototypes
- MOXA/moxa printk case

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Tested-by: Oyvind Aabling <Oyvind.Aabling@uni-c.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index af8077c25cbe09d584be17a580b2cd9476d06f04..876c79b1cee0ff1f772421d97c193877298b3058 100644 (file)
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -54,7 +54,6 @@
 #define MOXA_FW_HDRLEN         32
 
 #define MOXAMAJOR              172
-#define MOXACUMAJOR            173
 
 #define MAX_BOARDS             4       /* Don't change this value */
 #define MAX_PORTS_PER_BOARD    32      /* Don't change this value */
@@ -246,7 +245,7 @@ static void moxa_wait_finish(void __iomem *ofsAddr)
                printk(KERN_WARNING "moxa function expired\n");
 }
 
-static void moxafunc(void __iomem *ofsAddr, int cmd, ushort arg)
+static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
 {
        writew(arg, ofsAddr + FuncArg);
        writew(cmd, ofsAddr + FuncCode);
@@ -478,7 +477,7 @@ static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
                        goto err;
                tmp = readw(baseAddr + C320_status);
                if (tmp != STS_init) {
-                       printk(KERN_ERR "moxa: bios upload failed -- CPU/Basic "
+                       printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
                                        "module not found\n");
                        return -EIO;
                }
@@ -487,7 +486,7 @@ static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
 
        return 0;
 err:
-       printk(KERN_ERR "moxa: bios upload failed -- board not found\n");
+       printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
        return -EIO;
 }
 
@@ -497,7 +496,7 @@ static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
        void __iomem *baseAddr = brd->basemem;
 
        if (len < 7168) {
-               printk(KERN_ERR "moxa: invalid 320 bios -- too short\n");
+               printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
                return -EINVAL;
        }
 
@@ -642,7 +641,7 @@ static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
        int retval, i;
 
        if (len % 2) {
-               printk(KERN_ERR "moxa: bios length is not even\n");
+               printk(KERN_ERR "MOXA: bios length is not even\n");
                return -EINVAL;
        }
 
@@ -764,7 +763,7 @@ static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
                lens[a] = le16_to_cpu(hdr->len[a]);
                if (lens[a] && len + lens[a] <= fw->size &&
                                moxa_check_fw(&fw->data[len]))
-                       printk(KERN_WARNING "moxa firmware: unexpected input "
+                       printk(KERN_WARNING "MOXA firmware: unexpected input "
                                "at offset %u, but going on\n", (u32)len);
                if (!lens[a] && a < lencnt) {
                        sprintf(rsn, "too few entries in fw file");
@@ -965,7 +964,7 @@ static int __devinit moxa_pci_probe(struct pci_dev *pdev,
 
        pci_set_drvdata(pdev, board);
 
-       return (0);
+       return 0;
 err_base:
        iounmap(board->basemem);
        board->basemem = NULL;
@@ -1016,10 +1015,8 @@ static int __init moxa_init(void)
        moxaDriver->flags = TTY_DRIVER_REAL_RAW;
        tty_set_operations(moxaDriver, &moxa_ops);
 
-       pr_debug("Moxa tty devices major number = %d\n", ttymajor);
-
        if (tty_register_driver(moxaDriver)) {
-               printk(KERN_ERR "Couldn't install MOXA Smartio family driver !\n");
+               printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
                put_tty_driver(moxaDriver);
                return -1;
        }
@@ -1043,7 +1040,7 @@ static int __init moxa_init(void)
                        brd->busType = MOXA_BUS_TYPE_ISA;
                        brd->basemem = ioremap(baseaddr[i], 0x4000);
                        if (!brd->basemem) {
-                               printk(KERN_ERR "moxa: can't remap %lx\n",
+                               printk(KERN_ERR "MOXA: can't remap %lx\n",
                                                baseaddr[i]);
                                continue;
                        }
@@ -1063,7 +1060,7 @@ static int __init moxa_init(void)
 #ifdef CONFIG_PCI
        retval = pci_register_driver(&moxa_pci_driver);
        if (retval) {
-               printk(KERN_ERR "Can't register moxa pci driver!\n");
+               printk(KERN_ERR "Can't register MOXA pci driver!\n");
                if (isabrds)
                        retval = 0;
        }
@@ -1074,7 +1071,7 @@ static int __init moxa_init(void)
 
 static void __exit moxa_exit(void)
 {
-       int i;
+       unsigned int i;
 
 #ifdef CONFIG_PCI
        pci_unregister_driver(&moxa_pci_driver);
@@ -1236,12 +1233,8 @@ static int moxa_write(struct tty_struct *tty,
        len = MoxaPortWriteData(ch, buf, count);
        spin_unlock_bh(&moxa_lock);
 
-       /*********************************************
-       if ( !(ch->statusflags & LOWWAIT) &&
-            ((len != count) || (MoxaPortTxFree(port) <= 100)) )
-       ************************************************/
        ch->statusflags |= LOWWAIT;
-       return (len);
+       return len;
 }
 
 static int moxa_write_room(struct tty_struct *tty)
@@ -1249,10 +1242,10 @@ static int moxa_write_room(struct tty_struct *tty)
        struct moxa_port *ch;
 
        if (tty->stopped)
-               return (0);
+               return 0;
        ch = tty->driver_data;
        if (ch == NULL)
-               return (0);
+               return 0;
        return MoxaPortTxFree(ch);
 }
 
@@ -1278,7 +1271,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
         * routine.  And since the open() failed, we return 0 here.  TDJ
         */
        if (ch == NULL)
-               return (0);
+               return 0;
        chars = MoxaPortTxQueue(ch);
        if (chars) {
                /*
@@ -1288,7 +1281,7 @@ static int moxa_chars_in_buffer(struct tty_struct *tty)
                if (!(ch->statusflags & EMPTYWAIT))
                        moxa_setup_empty_event(tty);
        }
-       return (chars);
+       return chars;
 }
 
 static void moxa_flush_chars(struct tty_struct *tty)
@@ -1308,9 +1301,7 @@ static void moxa_put_char(struct tty_struct *tty, unsigned char c)
        spin_lock_bh(&moxa_lock);
        MoxaPortWriteData(ch, &c, 1);
        spin_unlock_bh(&moxa_lock);
-       /************************************************
-       if ( !(ch->statusflags & LOWWAIT) && (MoxaPortTxFree(port) <= 100) )
-       *************************************************/
+
        ch->statusflags |= LOWWAIT;
 }
 
@@ -1373,34 +1364,33 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file,
 
 static void moxa_throttle(struct tty_struct *tty)
 {
-       struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+       struct moxa_port *ch = tty->driver_data;
 
        ch->statusflags |= THROTTLE;
 }
 
 static void moxa_unthrottle(struct tty_struct *tty)
 {
-       struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+       struct moxa_port *ch = tty->driver_data;
 
        ch->statusflags &= ~THROTTLE;
 }
 
 static void moxa_set_termios(struct tty_struct *tty,
-                            struct ktermios *old_termios)
+               struct ktermios *old_termios)
 {
-       struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+       struct moxa_port *ch = tty->driver_data;
 
        if (ch == NULL)
                return;
        moxa_set_tty_param(tty, old_termios);
-       if (!(old_termios->c_cflag & CLOCAL) &&
-           (tty->termios->c_cflag & CLOCAL))
+       if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
                wake_up_interruptible(&ch->open_wait);
 }
 
 static void moxa_stop(struct tty_struct *tty)
 {
-       struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+       struct moxa_port *ch = tty->driver_data;
 
        if (ch == NULL)
                return;
@@ -1411,7 +1401,7 @@ static void moxa_stop(struct tty_struct *tty)
 
 static void moxa_start(struct tty_struct *tty)
 {
-       struct moxa_port *ch = (struct moxa_port *) tty->driver_data;
+       struct moxa_port *ch = tty->driver_data;
 
        if (ch == NULL)
                return;
@@ -1444,7 +1434,7 @@ static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
 {
        dcd = !!dcd;
 
-       if ((dcd != p->DCDState) && p->tty && C_CLOCAL(p->tty)) {
+       if (dcd != p->DCDState && p->tty && C_CLOCAL(p->tty)) {
                if (!dcd)
                        tty_hangup(p->tty);
        }
@@ -1552,12 +1542,10 @@ static void moxa_poll(unsigned long ignored)
 
 static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
 {
-       register struct ktermios *ts;
-       struct moxa_port *ch;
+       register struct ktermios *ts = tty->termios;
+       struct moxa_port *ch = tty->driver_data;
        int rts, cts, txflow, rxflow, xany, baud;
 
-       ch = (struct moxa_port *) tty->driver_data;
-       ts = tty->termios;
        rts = cts = txflow = rxflow = xany = 0;
        if (ts->c_cflag & CRTSCTS)
                rts = cts = 1;
@@ -1614,7 +1602,7 @@ static void moxa_shut_down(struct moxa_port *ch)
 static void MoxaPortFlushData(struct moxa_port *port, int mode)
 {
        void __iomem *ofsAddr;
-       if ((mode < 0) || (mode > 2))
+       if (mode < 0 || mode > 2)
                return;
        ofsAddr = port->tableAddr;
        moxafunc(ofsAddr, FC_FlushQueue, mode);
@@ -1624,27 +1612,6 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
        }
 }
 
-/*****************************************************************************
- *     Port level functions:                                                *
- *     2.  MoxaPortEnable(int port);                                        *
- *     3.  MoxaPortDisable(int port);                                       *
- *     4.  MoxaPortGetMaxBaud(int port);                                    *
- *     6.  MoxaPortSetBaud(int port, long baud);                            *
- *     8.  MoxaPortSetTermio(int port, unsigned char *termio);              *
- *     9.  MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);      *
- *     10. MoxaPortLineCtrl(int port, int dtrState, int rtsState);          *
- *     11. MoxaPortFlowCtrl(int port, int rts, int cts, int rx, int tx,int xany);    *
- *     12. MoxaPortLineStatus(int port);                                    *
- *     15. MoxaPortFlushData(int port, int mode);                           *
- *     16. MoxaPortWriteData(int port, unsigned char * buffer, int length); *
- *     17. MoxaPortReadData(int port, struct tty_struct *tty);              *
- *     20. MoxaPortTxQueue(int port);                                       *
- *     21. MoxaPortTxFree(int port);                                        *
- *     22. MoxaPortRxQueue(int port);                                       *
- *     24. MoxaPortTxDisable(int port);                                     *
- *     25. MoxaPortTxEnable(int port);                                      *
- *     27. MoxaPortResetBrkCnt(int port);                                   *
- *****************************************************************************/
 /*
  *    Moxa Port Number Description:
  *
@@ -1849,16 +1816,16 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
 static void MoxaPortEnable(struct moxa_port *port)
 {
        void __iomem *ofsAddr;
-       short lowwater = 512;
+       u16 lowwater = 512;
 
        ofsAddr = port->tableAddr;
        writew(lowwater, ofsAddr + Low_water);
        if (port->board->boardType == MOXA_BOARD_C320_ISA ||
-           port->board->boardType == MOXA_BOARD_C320_PCI) {
+                       port->board->boardType == MOXA_BOARD_C320_PCI)
                moxafunc(ofsAddr, FC_SetBreakIrq, 0);
-       } else {
-               writew(readw(ofsAddr + HostStat) | WakeupBreak, ofsAddr + HostStat);
-       }
+       else
+               writew(readw(ofsAddr + HostStat) | WakeupBreak,
+                               ofsAddr + HostStat);
 
        moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
        moxafunc(ofsAddr, FC_FlushQueue, 2);
@@ -1881,9 +1848,9 @@ static long MoxaPortGetMaxBaud(struct moxa_port *port)
 {
        if (port->board->boardType == MOXA_BOARD_C320_ISA ||
                        port->board->boardType == MOXA_BOARD_C320_PCI)
-               return (460800L);
+               return 460800L;
        else
-               return (921600L);
+               return 921600L;
 }
 
 
@@ -1893,8 +1860,8 @@ static long MoxaPortSetBaud(struct moxa_port *port, long baud)
        long max, clock;
        unsigned int val;
 
-       if ((baud < 50L) || ((max = MoxaPortGetMaxBaud(port)) == 0))
-               return (0);
+       if (baud < 50L || (max = MoxaPortGetMaxBaud(port)) == 0)
+               return 0;
        ofsAddr = port->tableAddr;
        if (baud > max)
                baud = max;
@@ -1907,7 +1874,7 @@ static long MoxaPortSetBaud(struct moxa_port *port, long baud)
        val = clock / baud;
        moxafunc(ofsAddr, FC_SetBaud, val);
        baud = clock / val;
-       return (baud);
+       return baud;
 }
 
 static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
@@ -1946,12 +1913,12 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
        } else
                mode |= MX_PARNONE;
 
-       moxafunc(ofsAddr, FC_SetDataMode, (ushort) mode);
+       moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
 
        if (port->board->boardType == MOXA_BOARD_C320_ISA ||
                        port->board->boardType == MOXA_BOARD_C320_PCI) {
                if (baud >= 921600L)
-                       return (-1);
+                       return -1;
        }
        baud = MoxaPortSetBaud(port, baud);
 
@@ -1962,24 +1929,23 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
                moxa_wait_finish(ofsAddr);
 
        }
-       return (baud);
+       return baud;
 }
 
 static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
                int *rtsState)
 {
-
        if (dtrState)
                *dtrState = !!(port->lineCtrl & DTR_ON);
        if (rtsState)
                *rtsState = !!(port->lineCtrl & RTS_ON);
 
-       return (0);
+       return 0;
 }
 
 static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
 {
-       int mode = 0;
+       u8 mode = 0;
 
        if (dtr)
                mode |= DTR_ON;
@@ -2193,60 +2159,46 @@ static void MoxaPortTxEnable(struct moxa_port *port)
 }
 
 static int moxa_get_serial_info(struct moxa_port *info,
-                               struct serial_struct __user *retinfo)
+               struct serial_struct __user *retinfo)
 {
-       struct serial_struct tmp;
-
-       memset(&tmp, 0, sizeof(tmp));
-       tmp.type = info->type;
-       tmp.line = info->tty->index;
-       tmp.port = 0;
-       tmp.irq = 0;
-       tmp.flags = info->asyncflags;
-       tmp.baud_base = 921600;
-       tmp.close_delay = info->close_delay;
-       tmp.custom_divisor = 0;
-       tmp.hub6 = 0;
-       if(copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-               return -EFAULT;
-       return (0);
+       struct serial_struct tmp = {
+               .type = info->type,
+               .line = info->tty->index,
+               .flags = info->asyncflags,
+               .baud_base = 921600,
+               .close_delay = info->close_delay
+       };
+       return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
 }
 
 
 static int moxa_set_serial_info(struct moxa_port *info,
-                               struct serial_struct __user *new_info)
+               struct serial_struct __user *new_info)
 {
        struct serial_struct new_serial;
 
-       if(copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+       if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
                return -EFAULT;
 
-       if ((new_serial.irq != 0) ||
-           (new_serial.port != 0) ||
-//           (new_serial.type != info->type) ||
-           (new_serial.custom_divisor != 0) ||
-           (new_serial.baud_base != 921600))
-               return (-EPERM);
+       if (new_serial.irq != 0 || new_serial.port != 0 ||
+                       new_serial.custom_divisor != 0 ||
+                       new_serial.baud_base != 921600)
+               return -EPERM;
 
        if (!capable(CAP_SYS_ADMIN)) {
                if (((new_serial.flags & ~ASYNC_USR_MASK) !=
                     (info->asyncflags & ~ASYNC_USR_MASK)))
-                       return (-EPERM);
-       } else {
+                       return -EPERM;
+       } else
                info->close_delay = new_serial.close_delay * HZ / 100;
-       }
 
        new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
        new_serial.flags |= (info->asyncflags & ASYNC_FLAGS);
 
-       if (new_serial.type == PORT_16550A) {
-               MoxaSetFifo(info, 1);
-       } else {
-               MoxaSetFifo(info, 0);
-       }
+       MoxaSetFifo(info, new_serial.type == PORT_16550A);
 
        info->type = new_serial.type;
-       return (0);
+       return 0;
 }