ata_piix: add workaround for Samsung DB-P70

Samsung DB-P70 somehow botched the first ICH9 SATA port.  The board
doesn't expose the first port but somehow SStatus reports link online
while failing SRST protocol leading to repeated probe failures and
thus long boot delay.

Because the BIOS doesn't carry any identifying DMI information, the
port can't be blacklisted safely.  Fortunately, the controller does
have subsystem vendor and ID set.  It's unclear whether the subsystem
IDs are used only for the board but it can be safely worked around by
disabling SIDPR access and just using SRST works around the problem.
Even when the workaround is triggered on an unaffected board the only
side effect will be missing SCR access.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joseph Jang <josephjang@gmail.com>
Reported-by: Jonghyon Sohn <mrsohn@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 54961c0b2c73a58e2dc64313ff95a858bbb262d2..ef8b30d577bd5092484660c05a7cdd75a2c9a803 100644 (file)
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev,
        return map;
 }
 
+static bool piix_no_sidpr(struct ata_host *host)
+{
+       struct pci_dev *pdev = to_pci_dev(host->dev);
+
+       /*
+        * Samsung DB-P70 only has three ATA ports exposed and
+        * curiously the unconnected first port reports link online
+        * while not responding to SRST protocol causing excessive
+        * detection delay.
+        *
+        * Unfortunately, the system doesn't carry enough DMI
+        * information to identify the machine but does have subsystem
+        * vendor and device set.  As it's unclear whether the
+        * subsystem vendor/device is used only for this specific
+        * board, the port can't be disabled solely with the
+        * information; however, turning off SIDPR access works around
+        * the problem.  Turn it off.
+        *
+        * This problem is reported in bnc#441240.
+        *
+        * https://bugzilla.novell.com/show_bug.cgi?id=441420
+        */
+       if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+           pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+           pdev->subsystem_device == 0xb049) {
+               dev_printk(KERN_WARNING, host->dev,
+                          "Samsung DB-P70 detected, disabling SIDPR\n");
+               return true;
+       }
+
+       return false;
+}
+
 static int __devinit piix_init_sidpr(struct ata_host *host)
 {
        struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
                if (hpriv->map[i] == IDE)
                        return 0;
 
+       /* is it blacklisted? */
+       if (piix_no_sidpr(host))
+               return 0;
+
        if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
                return 0;