#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpio-switch.h>
#include <mach/mux.h>
+#include <mach/dma.h>
#include <mach/tc.h>
#include <mach/nand.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT),
.id = -1,
};
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(15),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
- .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "H2 TSC2101",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* tsc2101_configure, */
- .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
- .codec_clock_on = NULL, /* tsc2101_clock_on, */
- .codec_clock_off = NULL, /* tsc2101_clock_off, */
- .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
- &h2_mcbsp1_device,
};
static void __init h2_init_smc91x(void)
#define H2_NAND_RB_GPIO_PIN 62
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
- return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
static void __init h2_init(void)
{
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#define H3_TS_GPIO 48
},
};
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(15),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
- .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
- /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "H3 TSC2101",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* tsc2101_configure, */
- .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2101_clock_setup, */
- .codec_clock_on = NULL, /* tsc2101_clock_on, */
- .codec_clock_off = NULL, /* tsc2101_clock_off, */
- .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
&h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
- &h3_mcbsp1_device,
};
static struct omap_usb_config h3_usb_config __initdata = {
},
};
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
- {
- .name = "mmc_slot",
- .gpio = OMAP_MPUIO(1),
- .type = OMAP_GPIO_SWITCH_TYPE_COVER,
- .debounce_rising = 100,
- .debounce_falling = 0,
- .notify = h3_mmc_slot_cover_handler,
- .notify_data = NULL,
- },
-};
-
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data)
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#include <mach/mmc.h>
static int innovator_keymap[] = {
.resource = &innovator_flash_resource,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OMAP Innovator AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct resource innovator_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device,
&innovator1510_smc91x_device,
- &innovator_mcbsp1_device,
&innovator_kp_device,
&innovator1510_lcd_device,
&innovator1510_spi_device,
#include <mach/keypad.h>
#include <mach/common.h>
#include <mach/dsp_common.h>
-#include <mach/aic23.h>
#include <mach/omapfb.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
*/
static int audio_pwr_state = -1;
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
/*
* audio_pwr_up / down should be called under audio_pwr_lock
*/
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
.resource = osk5912_cf_resources,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "OSK AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device,
&osk5912_smc91x_device,
&osk5912_cf_device,
- &osk5912_mcbsp1_device,
};
static struct gpio_led tps_leds[] = {
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
static void __init omap_palmte_init_irq(void)
{
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
};
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
- .spcr2 = FRST | GRST | XRST | XINTM(3),
- .xcr2 = XDATDLY(1) | XFIG,
- .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
- .pcr0 = SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
- .name = "TSC2102 audio",
- .mcbsp_regs_alsa = &palmte_mcbsp1_regs,
- .codec_configure_dev = NULL, /* tsc2102_configure, */
- .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
- .codec_clock_setup = NULL, /* tsc2102_clock_setup, */
- .codec_clock_on = NULL, /* tsc2102_clock_on, */
- .codec_clock_off = NULL, /* tsc2102_clock_off, */
- .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
-};
-
#ifdef CONFIG_APM
/*
* Values measured in 10 minute intervals averaged over 10 samples.
#include <asm/mach/flash.h>
#include <mach/led.h>
-#include <mach/mcbsp.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
#include <mach/irda.h>
#include <mach/keypad.h>
#include <mach/common.h>
-#include <mach/omap-alsa.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
.resource = &palmtt_flash_resource,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
- RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
- XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM |
- FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "PalmTT AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure, */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate, */
- .codec_clock_setup = NULL, /* aic23_clock_setup, */
- .codec_clock_on = NULL, /* aic23_clock_on, */
- .codec_clock_off = NULL, /* aic23_clock_off, */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct resource palmtt_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
static struct platform_device *palmtt_devices[] __initdata = {
&palmtt_flash_device,
- &palmtt_mcbsp1_device,
&palmtt_kp_device,
&palmtt_lcd_device,
&palmtt_irda_device,
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/mcbsp.h>
#include <mach/gpio.h>
#include <mach/mux.h>
#include <mach/usb.h>
.id = -1,
};
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
- .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
- .spcr1 = RINTM(3) | RRST,
- .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
- RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
- .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
- .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
- XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
- .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
- .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
- .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
- .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
- .name = "PalmZ71 AIC23",
- .mcbsp_regs_alsa = &mcbsp_regs,
- .codec_configure_dev = NULL, /* aic23_configure */
- .codec_set_samplerate = NULL, /* aic23_set_samplerate */
- .codec_clock_setup = NULL, /* aic23_clock_setup */
- .codec_clock_on = NULL, /* aic23_clock_on */
- .codec_clock_off = NULL, /* aic23_clock_off */
- .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &alsa_config,
- },
-};
-
static struct omap_backlight_config palmz71_backlight_config = {
.default_intensity = 0xa0,
};
static struct platform_device *devices[] __initdata = {
&palmz71_rom_device,
&palmz71_kp_device,
- &palmz71_mcbsp1_device,
&palmz71_lcd_device,
&palmz71_irda_device,
&palmz71_spi_device,
#include <mach/gpio.h>
#include <mach/mux.h>
+#include <mach/dma.h>
#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/tc.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
#include <mach/keypad.h>
/* Write to I2C device */
.resource = sx1_irda_resources,
};
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
- .spcr2 = XINTM(3), /* SPCR2=30 */
- .spcr1 = RINTM(3), /* SPCR1=30 */
- .rcr2 = 0, /* RCR2 =00 */
- .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
- .xcr2 = 0, /* XCR2 = 0 */
- .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
- .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
- .srgr2 = FSGM | FPER(31), /* SRGR2=101f */
- .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
- /* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
- .name = "SX1 EGold",
- .mcbsp_regs_alsa = &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
- .name = "omap_alsa_mcbsp",
- .id = 1,
- .dev = {
- .platform_data = &sx1_alsa_config,
- },
-};
-
/*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = {
&sx1_flash_device,
&sx1_kp_device,
&sx1_lcd_device,
- &sx1_mcbsp1_device,
&sx1_irda_device,
};
/*-----------------------------------------*/
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR 0x00
-#define RIGHT_LINE_VOLUME_ADDR 0x01
-#define LEFT_CHANNEL_VOLUME_ADDR 0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
-#define ANALOG_AUDIO_CONTROL_ADDR 0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
-#define POWER_DOWN_CONTROL_ADDR 0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
-#define SAMPLE_RATE_CONTROL_ADDR 0x08
-#define DIGITAL_INTERFACE_ACT_ADDR 0x09
-#define RESET_CONTROL_ADDR 0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED 0x0100
-#define LIM_MUTED 0x0080
-#define LIV_DEFAULT 0x0017
-#define LIV_MAX 0x001f
-#define LIV_MIN 0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON 0x0080
-#define LHV_DEFAULT 0x0079
-#define LHV_MAX 0x007f
-#define LHV_MIN 0x0000
-
-// Analog audio path control register
-#define STA_REG(x) ((x)<<6)
-#define STE_ENABLED 0x0020
-#define DAC_SELECTED 0x0010
-#define BYPASS_ON 0x0008
-#define INSEL_MIC 0x0004
-#define MICM_MUTED 0x0002
-#define MICB_20DB 0x0001
-
-// Digital audio path control register
-#define DACM_MUTE 0x0008
-#define DEEMP_32K 0x0002
-#define DEEMP_44K 0x0004
-#define DEEMP_48K 0x0006
-#define ADCHP_ON 0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF 0x0080
-#define CLK_OFF 0x0040
-#define OSC_OFF 0x0020
-#define OUT_OFF 0x0010
-#define DAC_OFF 0x0008
-#define ADC_OFF 0x0004
-#define MIC_OFF 0x0002
-#define LINE_OFF 0x0001
-
-// Digital audio interface register
-#define MS_MASTER 0x0040
-#define LRSWAP_ON 0x0020
-#define LRP_ON 0x0010
-#define IWL_16 0x0000
-#define IWL_20 0x0004
-#define IWL_24 0x0008
-#define IWL_32 0x000C
-#define FOR_I2S 0x0002
-#define FOR_DSP 0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF 0x0080
-#define CLKIN_HALF 0x0040
-#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON 0x0001
-#define SR_MASK 0xf
-#define CLKOUT_SHIFT 7
-#define CLKIN_SHIFT 6
-#define SR_SHIFT 2
-#define BOSR_SHIFT 1
-
-// Digital interface register
-#define ACT_ON 0x0001
-
-#define TLV320AIC23ID1 (0x1a) // cs low
-#define TLV320AIC23ID2 (0x1b) // cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */
projects / linux-2.6-omap-h63xx.git / commitdiff