]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
e1000: Fix msi enable leak on error, don't print error message, cleanup
authorAuke Kok <auke-jan.h.kok@intel.com>
Wed, 16 May 2007 08:49:46 +0000 (01:49 -0700)
committerJeff Garzik <jeff@garzik.org>
Fri, 18 May 2007 00:43:15 +0000 (20:43 -0400)
pci_enable_msi failure is a normal event so we should not print any error.
Going over the code I spotted a missing pci_disable_msi() leak when irq
allocation fails. The whole code also needed a cleanup, so I combined the
two different calls to pci_request_irq into a single call making this
look a lot better. All #ifdef CONFIG_PCI_MSI's have been removed.

Compile tested with both CONFIG_PCI_MSI enabled and disabled.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/e1000/e1000.h
drivers/net/e1000/e1000_main.c

index a9ea67e75c1b322f1bfd03b0543ce982535ee7d0..16a6edfeba41d38e9d4603038b3406aefedd84f4 100644 (file)
@@ -333,11 +333,9 @@ struct e1000_adapter {
        struct e1000_tx_ring test_tx_ring;
        struct e1000_rx_ring test_rx_ring;
 
-
        int msg_enable;
-#ifdef CONFIG_PCI_MSI
        boolean_t have_msi;
-#endif
+
        /* to not mess up cache alignment, always add to the bottom */
        boolean_t tso_force;
        boolean_t smart_power_down;     /* phy smart power down */
index 637ae8f6879199444716e0c8025ec56a3eaacdc0..49be393e1c1dc5acf40ae88c7ebc5b6bbf9f2ebf 100644 (file)
@@ -158,9 +158,7 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 static int e1000_set_mac(struct net_device *netdev, void *p);
 static irqreturn_t e1000_intr(int irq, void *data);
-#ifdef CONFIG_PCI_MSI
 static irqreturn_t e1000_intr_msi(int irq, void *data);
-#endif
 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
                                     struct e1000_tx_ring *tx_ring);
 #ifdef CONFIG_E1000_NAPI
@@ -300,31 +298,26 @@ module_exit(e1000_exit_module);
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
        struct net_device *netdev = adapter->netdev;
-       int flags, err = 0;
+       void (*handler) = &e1000_intr;
+       int irq_flags = IRQF_SHARED;
+       int err;
 
-       flags = IRQF_SHARED;
-#ifdef CONFIG_PCI_MSI
        if (adapter->hw.mac_type >= e1000_82571) {
-               adapter->have_msi = TRUE;
-               if ((err = pci_enable_msi(adapter->pdev))) {
-                       DPRINTK(PROBE, ERR,
-                        "Unable to allocate MSI interrupt Error: %d\n", err);
-                       adapter->have_msi = FALSE;
+               adapter->have_msi = !pci_enable_msi(adapter->pdev);
+               if (adapter->have_msi) {
+                       handler = &e1000_intr_msi;
+                       irq_flags = 0;
                }
        }
-       if (adapter->have_msi) {
-               flags &= ~IRQF_SHARED;
-               err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
-                                 netdev->name, netdev);
-               if (err)
-                       DPRINTK(PROBE, ERR,
-                              "Unable to allocate interrupt Error: %d\n", err);
-       } else
-#endif
-       if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
-                              netdev->name, netdev)))
+
+       err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+                         netdev);
+       if (err) {
+               if (adapter->have_msi)
+                       pci_disable_msi(adapter->pdev);
                DPRINTK(PROBE, ERR,
                        "Unable to allocate interrupt Error: %d\n", err);
+       }
 
        return err;
 }
@@ -335,10 +328,8 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
 
        free_irq(adapter->pdev->irq, netdev);
 
-#ifdef CONFIG_PCI_MSI
        if (adapter->have_msi)
                pci_disable_msi(adapter->pdev);
-#endif
 }
 
 /**
@@ -3744,7 +3735,6 @@ e1000_update_stats(struct e1000_adapter *adapter)
 
        spin_unlock_irqrestore(&adapter->stats_lock, flags);
 }
-#ifdef CONFIG_PCI_MSI
 
 /**
  * e1000_intr_msi - Interrupt Handler
@@ -3810,7 +3800,6 @@ e1000_intr_msi(int irq, void *data)
 
        return IRQ_HANDLED;
 }
-#endif
 
 /**
  * e1000_intr - Interrupt Handler