[ARM] omap: Fix IO_ADDRESS() macros

OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies
for use with __raw_{read|write}* for accessing registers.  Therefore,
these macros should return (void __iomem *) cookies, not integer values.

Doing this improves typechecking, and means we can find those places
where, eg, DMA controllers are incorrectly given virtual addresses to
DMA to, or physical addresses are thrown through a virtual to physical
address translation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 0e25a996bb4c17d65d02231bdb996647e56634f1..4965986b4ad56ee2ec794487ec606b3f670873c9 100644 (file)
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -67,8 +67,8 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
        {
-               .membase        = (char*)IO_ADDRESS(OMAP_UART1_BASE),
-               .mapbase        = (unsigned long)OMAP_UART1_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART1_BASE),
+               .mapbase        = OMAP_UART1_BASE,
                .irq            = INT_UART1,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
@@ -76,8 +76,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        },
        {
-               .membase        = (char*)IO_ADDRESS(OMAP_UART2_BASE),
-               .mapbase        = (unsigned long)OMAP_UART2_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART2_BASE),
+               .mapbase        = OMAP_UART2_BASE,
                .irq            = INT_UART2,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
@@ -85,8 +85,8 @@ static struct plat_serial8250_port serial_platform_data[] = {
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        },
        {
-               .membase        = (char*)IO_ADDRESS(OMAP_UART3_BASE),
-               .mapbase        = (unsigned long)OMAP_UART3_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART3_BASE),
+               .mapbase        = OMAP_UART3_BASE,
                .irq            = INT_UART3,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,

diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 87a44c715aa4dd1b0604f4f81874c15df9de5d7b..65fdf78c91e1b1d03c62f006d0937e35b16f3d28 100644 (file)
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_CM_REGADDR(module, reg)                                   \
-       (void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+                       IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
 #else
 #define OMAP2420_CM_REGADDR(module, reg)                               \
                        IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f51d69bc457dac2be97ff36c81ed4e037155c67c..9b4e58ee2ca222f754156b078444ff43003349e4 100644 (file)
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -64,10 +64,8 @@ static struct resource       gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned                gpmc_cs_map;
 
-static void __iomem *gpmc_base =
-       (void __iomem *) IO_ADDRESS(GPMC_BASE);
-static void __iomem *gpmc_cs_base =
-       (void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+static void __iomem *gpmc_base = IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base = IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
 
 static struct clk *gpmc_fck;
 

diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a5d4526ac4d6debdb1f0a0e0393bc37443e00bac..e53ebe7d58be22b06735e1f9633698c230a882fd 100644 (file)
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,11 +21,11 @@
 #include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
-#define TAP_BASE       io_p2v(0x48014000)
+#define TAP_BASE       IO_ADDRESS(0x48014000)
 #elif defined(CONFIG_ARCH_OMAP2430)
-#define TAP_BASE       io_p2v(0x4900A000)
+#define TAP_BASE       IO_ADDRESS(0x4900A000)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define TAP_BASE       io_p2v(0x4830A000)
+#define TAP_BASE       IO_ADDRESS(0x4830A000)
 #endif
 
 #define OMAP_TAP_IDCODE                0x0204

diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ef15b31d8fcc4f8c0b62167ef889685905fcbd1..742bd0070e63acbae83f3c6730baf4f2a885d097 100644 (file)
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -32,7 +32,7 @@
  * for each bank.. when in doubt, consult the TRM.
  */
 static struct omap_irq_bank {
-       unsigned long base_reg;
+       void __iomem *base_reg;
        unsigned int nr_irqs;
 } __attribute__ ((aligned(4))) irq_banks[] = {
        {
@@ -94,7 +94,7 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
        unsigned long tmp;
 
        tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff;
-       printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx "
+       printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
                         "(revision %ld.%ld) with %d interrupts\n",
                         bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
 

diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index bbf41fc8e9a9102cd70003b59fb7c85615f4339e..026d8a776ae6979573e447b95c7f3fc356f3a91f 100644 (file)
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -18,7 +18,7 @@
 
 #ifndef __ASSEMBLER__
 #define OMAP_PRM_REGADDR(module, reg)                                  \
-       (void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+                       IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
 #else
 #define OMAP2420_PRM_REGADDR(module, reg)                              \
                        IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index adc8a26a8fb01757ee6f18ced5104ac9db1edaa8..7faa53c3a9255c6f83a137ab32177ea379b65dd1 100644 (file)
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -32,24 +32,24 @@ static struct clk * uart3_fck = NULL;
 
 static struct plat_serial8250_port serial_platform_data[] = {
        {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART1_BASE),
-               .mapbase        = (unsigned long)OMAP_UART1_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART1_BASE),
+               .mapbase        = OMAP_UART1_BASE,
                .irq            = 72,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
                .regshift       = 2,
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        }, {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART2_BASE),
-               .mapbase        = (unsigned long)OMAP_UART2_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART2_BASE),
+               .mapbase        = OMAP_UART2_BASE,
                .irq            = 73,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
                .regshift       = 2,
                .uartclk        = OMAP16XX_BASE_BAUD * 16,
        }, {
-               .membase        = (char *)IO_ADDRESS(OMAP_UART3_BASE),
-               .mapbase        = (unsigned long)OMAP_UART3_BASE,
+               .membase        = IO_ADDRESS(OMAP_UART3_BASE),
+               .mapbase        = OMAP_UART3_BASE,
                .irq            = 74,
                .flags          = UPF_BOOT_AUTOCONF,
                .iotype         = UPIO_MEM,
@@ -71,7 +71,7 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
                                    int value)
 {
        offset <<= p->regshift;
-       __raw_writeb(value, (unsigned long)(p->membase + offset));
+       __raw_writeb(value, p->membase + offset);
 }
 
 /*

diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f4dff423ae7c19569adf3302f7851a527b595360..20e8db5fe32a58cc22156b737d4079e321bb3966 100644 (file)
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -258,12 +258,12 @@ static void __init __omap2_set_globals(void)
 #if defined(CONFIG_ARCH_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
-       .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x48014000),
-       .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-       .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-       .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-       .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-       .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+       .tap    = OMAP2_IO_ADDRESS(0x48014000),
+       .sdrc   = OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
+       .sms    = OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
+       .ctrl   = OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
+       .prm    = OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
+       .cm     = OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -276,12 +276,12 @@ void __init omap2_set_globals_242x(void)
 #if defined(CONFIG_ARCH_OMAP2430)
 
 static struct omap_globals omap243x_globals = {
-       .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4900a000),
-       .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-       .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-       .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-       .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-       .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+       .tap    = OMAP2_IO_ADDRESS(0x4900a000),
+       .sdrc   = OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
+       .sms    = OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
+       .ctrl   = OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
+       .prm    = OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
+       .cm     = OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -294,12 +294,12 @@ void __init omap2_set_globals_243x(void)
 #if defined(CONFIG_ARCH_OMAP3430)
 
 static struct omap_globals omap343x_globals = {
-       .tap    = (__force void __iomem *)OMAP2_IO_ADDRESS(0x4830A000),
-       .sdrc   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-       .sms    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-       .ctrl   = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-       .prm    = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-       .cm     = (__force void __iomem *)OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+       .tap    = OMAP2_IO_ADDRESS(0x4830A000),
+       .sdrc   = OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
+       .sms    = OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
+       .ctrl   = OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
+       .prm    = OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
+       .cm     = OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a63b644ad30574b024f4ff60146f9233b7fa17db..b4057e2718759a16b45e75e4c3a389fdda863e44 100644 (file)
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2297,13 +2297,13 @@ static int __init omap_init_dma(void)
        int ch, r;
 
        if (cpu_class_is_omap1()) {
-               omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP1_DMA_BASE);
+               omap_dma_base = IO_ADDRESS(OMAP1_DMA_BASE);
                dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
        } else if (cpu_is_omap24xx()) {
-               omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP24XX_DMA4_BASE);
+               omap_dma_base = IO_ADDRESS(OMAP24XX_DMA4_BASE);
                dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
        } else if (cpu_is_omap34xx()) {
-               omap_dma_base = (void __iomem *)IO_ADDRESS(OMAP34XX_DMA4_BASE);
+               omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
                dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
        } else {
                pr_err("DMA init failed for unsupported omap\n");

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 743a4abcd85d99f6a23bb897be2315b57012fc6f..df61ad247dc2fc6afba2f550aaaca9fa8c7f5b9d 100644 (file)
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -693,7 +693,7 @@ int __init omap_dm_timer_init(void)
 
        for (i = 0; i < dm_timer_count; i++) {
                timer = &dm_timers[i];
-               timer->io_base = (void __iomem *)io_p2v(timer->phys_base);
+               timer->io_base = IO_ADDRESS(timer->phys_base);
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
                if (cpu_class_is_omap2()) {
                        char clk_name[16];

diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index e3fd62d9a995115bc2514807a8203f52dfe31684..ee378d254cbd2faf1a2ea5b6597b8475851496ea 100644 (file)
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -19,11 +19,11 @@
 #include <mach/io.h>
 
 #define OMAP242X_CTRL_REGADDR(reg)                                     \
-       (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+       IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)                                     \
-       (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+       IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)                                     \
-       (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+       IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 
 /*
  * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for

diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
index b9f57ce0ac157da425149bc8d59e3b3e8b8a1ab6..dd0cf069431df34dd0b3a8d48e67df5cef5f23f9 100644 (file)
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -55,14 +55,13 @@
 
 #if defined(CONFIG_ARCH_OMAP1)
 
-#define IO_PHYS                0xFFFB0000
-#define IO_OFFSET      0x01000000      /* Virtual IO = 0xfefb0000 */
-#define IO_SIZE                0x40000
-#define IO_VIRT                (IO_PHYS - IO_OFFSET)
-#define IO_ADDRESS(pa) ((pa) - IO_OFFSET)
-#define OMAP1_IO_ADDRESS(pa)   ((pa) - IO_OFFSET)
-#define io_p2v(pa)     ((pa) - IO_OFFSET)
-#define io_v2p(va)     ((va) + IO_OFFSET)
+#define IO_PHYS                        0xFFFB0000
+#define IO_OFFSET              0x01000000      /* Virtual IO = 0xfefb0000 */
+#define IO_SIZE                        0x40000
+#define IO_VIRT                        (IO_PHYS - IO_OFFSET)
+#define __IO_ADDRESS(pa)       ((pa) - IO_OFFSET)
+#define __OMAP1_IO_ADDRESS(pa) ((pa) - IO_OFFSET)
+#define io_v2p(va)             ((va) + IO_OFFSET)
 
 #elif defined(CONFIG_ARCH_OMAP2)
 
@@ -90,11 +89,10 @@
 
 #endif
 
-#define IO_OFFSET      0x90000000
-#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)   ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
-#define io_p2v(pa)     ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
-#define io_v2p(va)     ((va) - IO_OFFSET)      /* Works for L3 and L4 */
+#define IO_OFFSET              0x90000000
+#define __IO_ADDRESS(pa)       ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)      /* Works for L3 and L4 */
+#define io_v2p(va)             ((va) - IO_OFFSET)      /* Works for L3 and L4 */
 
 /* DSP */
 #define DSP_MEM_24XX_PHYS      OMAP2420_DSP_MEM_BASE   /* 0x58000000 */
@@ -149,9 +147,8 @@
 
 
 #define IO_OFFSET              0x90000000
-#define IO_ADDRESS(pa)         ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define OMAP2_IO_ADDRESS(pa)   ((pa) + IO_OFFSET)/* Works for L3 and L4 */
-#define io_p2v(pa)             ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __IO_ADDRESS(pa)       ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
 #define io_v2p(va)             ((va) - IO_OFFSET)/* Works for L3 and L4 */
 
 /* DSP */
@@ -167,7 +164,14 @@
 
 #endif
 
-#ifndef __ASSEMBLER__
+#define IO_ADDRESS(pa)         IOMEM(__IO_ADDRESS(pa))
+#define OMAP1_IO_ADDRESS(pa)   IOMEM(__OMAP1_IO_ADDRESS(pa))
+#define OMAP2_IO_ADDRESS(pa)   IOMEM(__OMAP2_IO_ADDRESS(pa))
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)               x
+#else
+#define IOMEM(x)               ((void __force __iomem *)(x))
 
 /*
  * Functions to access the OMAP IO region
@@ -178,13 +182,13 @@
  *      - DO NOT use hardcoded virtual addresses to allow changing the
  *        IO address space again if needed
  */
-#define omap_readb(a)          (*(volatile unsigned char  *)IO_ADDRESS(a))
-#define omap_readw(a)          (*(volatile unsigned short *)IO_ADDRESS(a))
-#define omap_readl(a)          (*(volatile unsigned int   *)IO_ADDRESS(a))
+#define omap_readb(a)          __raw_readb(IO_ADDRESS(a))
+#define omap_readw(a)          __raw_readw(IO_ADDRESS(a))
+#define omap_readl(a)          __raw_readl(IO_ADDRESS(a))
 
-#define omap_writeb(v,a)       (*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
-#define omap_writew(v,a)       (*(volatile unsigned short *)IO_ADDRESS(a) = (v))
-#define omap_writel(v,a)       (*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+#define omap_writeb(v,a)       __raw_writeb(v, IO_ADDRESS(a))
+#define omap_writew(v,a)       __raw_writew(v, IO_ADDRESS(a))
+#define omap_writel(v,a)       __raw_writel(v, IO_ADDRESS(a))
 
 extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);

diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
index bfa09325a5ffad992a7c2aadd05b84d899ccf36d..6063e9681de2653d17f13350482c58290c562cae 100644 (file)
--- a/arch/arm/plat-omap/include/mach/pm.h
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -39,11 +39,11 @@
  * Register and offset definitions to be used in PM assembler code
  * ----------------------------------------------------------------------------
  */
-#define CLKGEN_REG_ASM_BASE            io_p2v(0xfffece00)
+#define CLKGEN_REG_ASM_BASE            IO_ADDRESS(0xfffece00)
 #define ARM_IDLECT1_ASM_OFFSET         0x04
 #define ARM_IDLECT2_ASM_OFFSET         0x08
 
-#define TCMIF_ASM_BASE                 io_p2v(0xfffecc00)
+#define TCMIF_ASM_BASE                 IO_ADDRESS(0xfffecc00)
 #define EMIFS_CONFIG_ASM_OFFSET                0x0c
 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET  0x20
 

diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index 787b7acec546eeaf7330be8e8e834b83e5b22d61..d908eb527c8de43c2fd7b4eab4e1d8d3fc467039 100644 (file)
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -63,9 +63,9 @@
  */
 
 
-#define OMAP242X_SMS_REGADDR(reg)      (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)      (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)      (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+#define OMAP242X_SMS_REGADDR(reg)      IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)      IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)      IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 

diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 58f624bd22e9802aee39223b6f50dd9599001455..dfb72f5e4c962ad35098fb07a65252b99be31941 100644 (file)
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -212,9 +212,9 @@ static void enable_rfbi_mode(int enable)
        dispc_write_reg(DISPC_CONTROL, l);
 
        /* Set bypass mode in RFBI module */
-       l = __raw_readl(io_p2v(RFBI_CONTROL));
+       l = __raw_readl(IO_ADDRESS(RFBI_CONTROL));
        l |= enable ? 0 : (1 << 1);
-       __raw_writel(l, io_p2v(RFBI_CONTROL));
+       __raw_writel(l, IO_ADDRESS(RFBI_CONTROL));
 }
 
 static void set_lcd_data_lines(int data_lines)
@@ -1419,7 +1419,7 @@ static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
        }
 
        /* L3 firewall setting: enable access to OCM RAM */
-       __raw_writel(0x402000b0, io_p2v(0x680050a0));
+       __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
 
        if ((r = alloc_palette_ram()) < 0)
                goto fail2;