some drivers switch away from OMAP-specific GPIO calls

This updates most of the OMAP drivers which are in mainline to
switch to using the cross-platform GPIO calls instead of the
older OMAP-specific ones.

This is all fairly brainless/obvious stuff.  Probably the
most interesting bit is to observe that the omap-keypad
code seems to now have a portable core that could work with
non-OMAP matrix keypads.  (That would improve with hardware
IRQ debouncing enabled, of course...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 1829ee077227889106de7e9be9be2fa8b1cc3a62..d57d2cb718fc4867c8c48c5fb9fede04ebc996cc 100644 (file)
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -76,12 +76,9 @@ static unsigned int *col_gpios;
 static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value)
 {
        int col;
-       for (col = 0; col < omap_kp->cols; col++) {
-               if (value & (1 << col))
-                       omap_set_gpio_dataout(col_gpios[col], 1);
-               else
-                       omap_set_gpio_dataout(col_gpios[col], 0);
-       }
+
+       for (col = 0; col < omap_kp->cols; col++)
+               gpio_set_value(col_gpios[col], value & (1 << col));
 }
 
 static u8 get_row_gpio_val(struct omap_kp *omap_kp)
@@ -90,7 +87,7 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp)
        u8 value = 0;
 
        for (row = 0; row < omap_kp->rows; row++) {
-               if (omap_get_gpio_datain(row_gpios[row]))
+               if (gpio_get_value(row_gpios[row]))
                        value |= (1 << row);
        }
        return value;
@@ -361,23 +358,23 @@ static int __init omap_kp_probe(struct platform_device *pdev)
        if (cpu_is_omap24xx()) {
                /* Cols: outputs */
                for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) {
-                       if (omap_request_gpio(col_gpios[col_idx]) < 0) {
+                       if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) {
                                printk(KERN_ERR "Failed to request"
                                       "GPIO%d for keypad\n",
                                       col_gpios[col_idx]);
                                goto err1;
                        }
-                       omap_set_gpio_direction(col_gpios[col_idx], 0);
+                       gpio_direction_output(col_gpios[col_idx], 0);
                }
                /* Rows: inputs */
                for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) {
-                       if (omap_request_gpio(row_gpios[row_idx]) < 0) {
+                       if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) {
                                printk(KERN_ERR "Failed to request"
                                       "GPIO%d for keypad\n",
                                       row_gpios[row_idx]);
                                goto err2;
                        }
-                       omap_set_gpio_direction(row_gpios[row_idx], 1);
+                       gpio_direction_input(row_gpios[row_idx]);
                }
        } else {
                col_idx = 0;
@@ -446,10 +443,10 @@ err3:
        device_remove_file(&pdev->dev, &dev_attr_enable);
 err2:
        for (i = row_idx - 1; i >=0; i--)
-               omap_free_gpio(row_gpios[i]);
+               gpio_free(row_gpios[i]);
 err1:
        for (i = col_idx - 1; i >=0; i--)
-               omap_free_gpio(col_gpios[i]);
+               gpio_free(col_gpios[i]);
 
        kfree(omap_kp);
        input_free_device(input_dev);
@@ -466,9 +463,9 @@ static int omap_kp_remove(struct platform_device *pdev)
        if (cpu_is_omap24xx()) {
                int i;
                for (i = 0; i < omap_kp->cols; i++)
-                       omap_free_gpio(col_gpios[i]);
+                       gpio_free(col_gpios[i]);
                for (i = 0; i < omap_kp->rows; i++) {
-                       omap_free_gpio(row_gpios[i]);
+                       gpio_free(row_gpios[i]);
                        free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0);
                }
        } else {

diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 26d42987971fc9480520454fd2944e23c5f47641..782994ead0e83e1a123d011ac867ee3c9ea08c17 100644 (file)
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -145,7 +145,7 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 
 static int ams_delta_nand_ready(struct mtd_info *mtd)
 {
-       return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB);
+       return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
 }
 
 /*
@@ -185,7 +185,7 @@ static int __init ams_delta_init(void)
        this->read_buf = ams_delta_read_buf;
        this->verify_buf = ams_delta_verify_buf;
        this->cmd_ctrl = ams_delta_hwcontrol;
-       if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) {
+       if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
                this->dev_ready = ams_delta_nand_ready;
        } else {
                this->dev_ready = NULL;

diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 6a42c6a0cd9991466b1a77781873e05b3171fcd8..4c4f7ee6d733a66e739c6be1e9cd65ad370f8633 100644 (file)
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -32,43 +32,43 @@ static int innovator1610_panel_init(struct lcd_panel *panel,
 {
        int r = 0;
 
-       if (omap_request_gpio(14)) {
+       if (gpio_request(14, "lcd_en0")) {
                pr_err(MODULE_NAME ": can't request GPIO 14\n");
                r = -1;
                goto exit;
        }
-       if (omap_request_gpio(15)) {
+       if (gpio_request(15, "lcd_en1")) {
                pr_err(MODULE_NAME ": can't request GPIO 15\n");
-               omap_free_gpio(14);
+               gpio_free(14);
                r = -1;
                goto exit;
        }
        /* configure GPIO(14, 15) as outputs */
-       omap_set_gpio_direction(14, 0);
-       omap_set_gpio_direction(15, 0);
+       gpio_direction_output(14, 0);
+       gpio_direction_output(15, 0);
 exit:
        return r;
 }
 
 static void innovator1610_panel_cleanup(struct lcd_panel *panel)
 {
-       omap_free_gpio(15);
-       omap_free_gpio(14);
+       gpio_free(15);
+       gpio_free(14);
 }
 
 static int innovator1610_panel_enable(struct lcd_panel *panel)
 {
        /* set GPIO14 and GPIO15 high */
-       omap_set_gpio_dataout(14, 1);
-       omap_set_gpio_dataout(15, 1);
+       gpio_set_value(14, 1);
+       gpio_set_value(15, 1);
        return 0;
 }
 
 static void innovator1610_panel_disable(struct lcd_panel *panel)
 {
        /* set GPIO13, GPIO14 and GPIO15 low */
-       omap_set_gpio_dataout(14, 0);
-       omap_set_gpio_dataout(15, 0);
+       gpio_set_value(14, 0);
+       gpio_set_value(15, 0);
 }
 
 static unsigned long innovator1610_panel_get_caps(struct lcd_panel *panel)

diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index a4a725f427a487843b03cad5e45abbf4fd230004..379c96d36da5833377e5d5df97085662ed6b52f5 100644 (file)
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -29,6 +29,7 @@
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
+       /* gpio2 was allocated in board init */
        return 0;
 }
 
@@ -47,11 +48,8 @@ static int osk_panel_enable(struct lcd_panel *panel)
        /* Set PWL level */
        omap_writeb(0xFF, OMAP_PWL_ENABLE);
 
-       /* configure GPIO2 as output */
-       omap_set_gpio_direction(2, 0);
-
-       /* set GPIO2 high */
-       omap_set_gpio_dataout(2, 1);
+       /* set GPIO2 high (lcd power enabled) */
+       gpio_set_value(2, 1);
 
        return 0;
 }
@@ -65,7 +63,7 @@ static void osk_panel_disable(struct lcd_panel *panel)
        omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
 
        /* set GPIO2 low */
-       omap_set_gpio_dataout(2, 0);
+       gpio_set_value(2, 0);
 }
 
 static unsigned long osk_panel_get_caps(struct lcd_panel *panel)

diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c
index caa6a896cb8b7d84912dceb6a45b7e3871f3c588..e55de201b8ff4508e6de02ae29c970acf9cffb2f 100644 (file)
--- a/drivers/video/omap/lcd_sx1.c
+++ b/drivers/video/omap/lcd_sx1.c
@@ -81,21 +81,21 @@ static void epson_sendbyte(int flag, unsigned char byte)
        int i, shifter = 0x80;
 
        if (!flag)
-               omap_set_gpio_dataout(_A_LCD_SSC_A0, 0);
+               gpio_set_value(_A_LCD_SSC_A0, 0);
        mdelay(2);
-       omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
+       gpio_set_value(A_LCD_SSC_RD, 1);
 
-       omap_set_gpio_dataout(A_LCD_SSC_SD, flag);
+       gpio_set_value(A_LCD_SSC_SD, flag);
 
        OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
        OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
        for (i = 0; i < 8; i++) {
                OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
-               omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte);
+               gpio_set_value(A_LCD_SSC_SD, shifter & byte);
                OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
                shifter >>= 1;
        }
-       omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+       gpio_set_value(_A_LCD_SSC_A0, 1);
 }
 
 static void init_system(void)
@@ -107,25 +107,18 @@ static void init_system(void)
 static void setup_GPIO(void)
 {
        /* new wave */
-       omap_request_gpio(A_LCD_SSC_RD);
-       omap_request_gpio(A_LCD_SSC_SD);
-       omap_request_gpio(_A_LCD_RESET);
-       omap_request_gpio(_A_LCD_SSC_CS);
-       omap_request_gpio(_A_LCD_SSC_A0);
-
-       /* set all GPIOs to output */
-       omap_set_gpio_direction(A_LCD_SSC_RD, 0);
-       omap_set_gpio_direction(A_LCD_SSC_SD, 0);
-       omap_set_gpio_direction(_A_LCD_RESET, 0);
-       omap_set_gpio_direction(_A_LCD_SSC_CS, 0);
-       omap_set_gpio_direction(_A_LCD_SSC_A0, 0);
-
-       /* set GPIO data */
-       omap_set_gpio_dataout(A_LCD_SSC_RD, 1);
-       omap_set_gpio_dataout(A_LCD_SSC_SD, 0);
-       omap_set_gpio_dataout(_A_LCD_RESET, 0);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_A0, 1);
+       gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
+       gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
+       gpio_request(_A_LCD_RESET, "lcd_reset");
+       gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
+       gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
+
+       /* set GPIOs to output, with initial data */
+       gpio_direction_output(A_LCD_SSC_RD, 1);
+       gpio_direction_output(A_LCD_SSC_SD, 0);
+       gpio_direction_output(_A_LCD_RESET, 0);
+       gpio_direction_output(_A_LCD_SSC_CS, 1);
+       gpio_direction_output(_A_LCD_SSC_A0, 1);
 }
 
 static void display_init(void)
@@ -139,61 +132,61 @@ static void display_init(void)
        mdelay(2);
 
        /* reset LCD */
-       omap_set_gpio_dataout(A_LCD_SSC_SD, 1);
+       gpio_set_value(A_LCD_SSC_SD, 1);
        epson_sendbyte(0, 0x25);
 
-       omap_set_gpio_dataout(_A_LCD_RESET, 0);
+       gpio_set_value(_A_LCD_RESET, 0);
        mdelay(10);
-       omap_set_gpio_dataout(_A_LCD_RESET, 1);
+       gpio_set_value(_A_LCD_RESET, 1);
 
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
        mdelay(2);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD, phase 1 */
        epson_sendbyte(0, 0xCA);
        for (i = 0; i < 10; i++)
                epson_sendbyte(1, INIT_1[i]);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 2 */
        epson_sendbyte(0, 0xCB);
        for (i = 0; i < 125; i++)
                epson_sendbyte(1, INIT_2[i]);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 2a */
        epson_sendbyte(0, 0xCC);
        for (i = 0; i < 14; i++)
                epson_sendbyte(1, INIT_3[i]);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 3 */
        epson_sendbyte(0, 0xBC);
        epson_sendbyte(1, 0x08);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 4 */
        epson_sendbyte(0, 0x07);
        epson_sendbyte(1, 0x05);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 5 */
        epson_sendbyte(0, 0x94);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 6 */
        epson_sendbyte(0, 0xC6);
        epson_sendbyte(1, 0x80);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
        mdelay(100); /* used to be 1000 */
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 7 */
        epson_sendbyte(0, 0x16);
@@ -201,8 +194,8 @@ static void display_init(void)
        epson_sendbyte(1, 0x00);
        epson_sendbyte(1, 0xB1);
        epson_sendbyte(1, 0x00);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 8 */
        epson_sendbyte(0, 0x76);
@@ -210,12 +203,12 @@ static void display_init(void)
        epson_sendbyte(1, 0x00);
        epson_sendbyte(1, 0xDB);
        epson_sendbyte(1, 0x00);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        /* init LCD phase 9 */
        epson_sendbyte(0, 0xAF);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
 }
 
 static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
@@ -231,18 +224,18 @@ static void sx1_panel_disable(struct lcd_panel *panel)
 {
        printk(KERN_INFO "SX1: LCD panel disable\n");
        sx1_setmmipower(0);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
 
        epson_sendbyte(0, 0x25);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        epson_sendbyte(0, 0xAE);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
        mdelay(100);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 0);
+       gpio_set_value(_A_LCD_SSC_CS, 0);
 
        epson_sendbyte(0, 0x95);
-       omap_set_gpio_dataout(_A_LCD_SSC_CS, 1);
+       gpio_set_value(_A_LCD_SSC_CS, 1);
 }
 
 static int sx1_panel_enable(struct lcd_panel *panel)