]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
V4L/DVB (7661): stv0299: Add flag to turn off OP0 output
authorOliver Endriss <o.endriss@gmx.de>
Mon, 21 Apr 2008 00:57:34 +0000 (21:57 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 24 Apr 2008 17:09:45 +0000 (14:09 -0300)
Add flag to turn off OP0 output.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/dvb/frontends/stv0299.c
drivers/media/dvb/frontends/stv0299.h

index f7c36741537d1e4e2d75a75f0a8bd2eb4f66ea92..17556183e871629c2ae4fabc116c598ce233ea70 100644 (file)
@@ -366,26 +366,32 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag
         *  H/V switching over OP0, OP1 and OP2 are LNB power enable bits
         */
        reg0x0c &= 0x0f;
-
-       if (voltage == SEC_VOLTAGE_OFF) {
-               stv0299_writeregI (state, 0x0c, 0x00); /*       LNB power off! */
-               return stv0299_writeregI (state, 0x08, 0x00); /*        LNB power off! */
-       }
-
-       stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6));
+       reg0x08 = (reg0x08 & 0x3f) | (state->config->lock_output << 6);
 
        switch (voltage) {
        case SEC_VOLTAGE_13:
-               if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) reg0x0c |= 0x10;
-               else reg0x0c |= 0x40;
-
-               return stv0299_writeregI(state, 0x0c, reg0x0c);
-
+               if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0)
+                       reg0x0c |= 0x10; /* OP1 off, OP0 on */
+               else
+                       reg0x0c |= 0x40; /* OP1 on, OP0 off */
+               break;
        case SEC_VOLTAGE_18:
-               return stv0299_writeregI(state, 0x0c, reg0x0c | 0x50);
+               reg0x0c |= 0x50; /* OP1 on, OP0 on */
+               break;
+       case SEC_VOLTAGE_OFF:
+               /* LNB power off! */
+               reg0x08 = 0x00;
+               reg0x0c = 0x00;
+               break;
        default:
                return -EINVAL;
        };
+
+       if (state->config->op0_off)
+               reg0x0c &= ~0x10;
+
+       stv0299_writeregI(state, 0x08, reg0x08);
+       return stv0299_writeregI(state, 0x0c, reg0x0c);
 }
 
 static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long cmd)
@@ -445,11 +451,20 @@ static int stv0299_init (struct dvb_frontend* fe)
 {
        struct stv0299_state* state = fe->demodulator_priv;
        int i;
+       u8 reg;
+       u8 val;
 
        dprintk("stv0299: init chip\n");
 
-       for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2)
-               stv0299_writeregI(state, state->config->inittab[i], state->config->inittab[i+1]);
+       for (i = 0; ; i += 2)  {
+               reg = state->config->inittab[i];
+               val = state->config->inittab[i+1];
+               if (reg == 0xff && val == 0xff)
+                       break;
+               if (reg == 0x0c && state->config->op0_off)
+                       val &= ~0x10;
+               stv0299_writeregI(state, reg, val);
+       }
 
        return 0;
 }
index 84eaeb51854026f821a88bf551f2b3bc3365774e..abd9cf8153cf2266003a831e5d2dfec0556bb8d0 100644 (file)
@@ -82,6 +82,9 @@ struct stv0299_config
        /* Is 13v controlled by OP0 or OP1? */
        u8 volt13_op0_op1:1;
 
+       /* Turn-off OP0? */
+       u8 op0_off:1;
+
        /* minimum delay before retuning */
        int min_delay_ms;