[MIPS] Remove asm-mips/mips-boards/atlas{,int}.h

asm-mips/mips-boards/atlas{,int}.h are now obsolete.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h
deleted file mode 100644 (file)
index a8ae12d..0000000
--- a/include/asm-mips/mips-boards/atlas.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines of the Atlas board specific address-MAP, registers, etc.
- *
- */
-#ifndef _MIPS_ATLAS_H
-#define _MIPS_ATLAS_H
-
-#include <asm/addrspace.h>
-
-/*
- * Atlas RTC-device indirect register access.
- */
-#define ATLAS_RTC_ADR_REG       0x1f000800
-#define ATLAS_RTC_DAT_REG       0x1f000808
-
-/*
- * Atlas interrupt controller register base.
- */
-#define ATLAS_ICTRL_REGS_BASE   0x1f000000
-
-/*
- * Atlas registers are memory mapped on 64-bit aligned boundaries and
- * only word access are allowed.
- */
-struct atlas_ictrl_regs {
-       volatile unsigned int intraw;
-       int dummy1;
-       volatile unsigned int intseten;
-       int dummy2;
-       volatile unsigned int intrsten;
-       int dummy3;
-       volatile unsigned int intenable;
-       int dummy4;
-       volatile unsigned int intstatus;
-       int dummy5;
-};
-
-/*
- * Atlas UART register base.
- */
-#define ATLAS_UART_REGS_BASE    0x1f000900
-#define ATLAS_BASE_BAUD ( 3686400 / 16 )
-
-/*
- * Atlas PSU standby register.
- */
-#define ATLAS_PSUSTBY_REG       0x1f000600
-#define ATLAS_GOSTBY            0x4d
-
-/*
- * We make a universal assumption about the way the bootloader (YAMON)
- * have located the Philips SAA9730 chip.
- * This is not ideal, but is needed for setting up remote debugging as
- * soon as possible.
- */
-#define ATLAS_SAA9730_REG      0x10800000
-
-#define ATLAS_SAA9730_BAUDCLOCK        3692300
-
-#endif /* !(_MIPS_ATLAS_H) */

diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
deleted file mode 100644 (file)
index 93ba1c1..0000000
--- a/include/asm-mips/mips-boards/atlasint.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright (C) 1999, 2006  MIPS Technologies, Inc.  All rights reserved.
- *     Authors: Carsten Langgaard <carstenl@mips.com>
- *              Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Defines for the Atlas interrupt controller.
- *
- */
-#ifndef _MIPS_ATLASINT_H
-#define _MIPS_ATLASINT_H
-
-#include <irq.h>
-
-/* CPU interrupt offsets */
-#define MIPSCPU_INT_SW0                0
-#define MIPSCPU_INT_SW1                1
-#define MIPSCPU_INT_MB0                2
-#define MIPSCPU_INT_ATLAS      MIPSCPU_INT_MB0
-#define MIPSCPU_INT_MB1                3
-#define MIPSCPU_INT_MB2                4
-#define MIPSCPU_INT_MB3                5
-#define MIPSCPU_INT_MB4                6
-
-/*
- * Interrupts 8..39 are used for Atlas interrupt controller interrupts
- */
-#define ATLAS_INT_BASE         8
-#define ATLAS_INT_UART         (ATLAS_INT_BASE + 0)
-#define ATLAS_INT_TIM0         (ATLAS_INT_BASE + 1)
-#define ATLAS_INT_RES2         (ATLAS_INT_BASE + 2)
-#define ATLAS_INT_RES3         (ATLAS_INT_BASE + 3)
-#define ATLAS_INT_RTC          (ATLAS_INT_BASE + 4)
-#define ATLAS_INT_COREHI       (ATLAS_INT_BASE + 5)
-#define ATLAS_INT_CORELO       (ATLAS_INT_BASE + 6)
-#define ATLAS_INT_RES7         (ATLAS_INT_BASE + 7)
-#define ATLAS_INT_PCIA         (ATLAS_INT_BASE + 8)
-#define ATLAS_INT_PCIB         (ATLAS_INT_BASE + 9)
-#define ATLAS_INT_PCIC         (ATLAS_INT_BASE + 10)
-#define ATLAS_INT_PCID         (ATLAS_INT_BASE + 11)
-#define ATLAS_INT_ENUM         (ATLAS_INT_BASE + 12)
-#define ATLAS_INT_DEG          (ATLAS_INT_BASE + 13)
-#define ATLAS_INT_ATXFAIL      (ATLAS_INT_BASE + 14)
-#define ATLAS_INT_INTA         (ATLAS_INT_BASE + 15)
-#define ATLAS_INT_INTB         (ATLAS_INT_BASE + 16)
-#define ATLAS_INT_ETH          ATLAS_INT_INTB
-#define ATLAS_INT_INTC         (ATLAS_INT_BASE + 17)
-#define ATLAS_INT_SCSI         ATLAS_INT_INTC
-#define ATLAS_INT_INTD         (ATLAS_INT_BASE + 18)
-#define ATLAS_INT_SERR         (ATLAS_INT_BASE + 19)
-#define ATLAS_INT_RES20                (ATLAS_INT_BASE + 20)
-#define ATLAS_INT_RES21                (ATLAS_INT_BASE + 21)
-#define ATLAS_INT_RES22                (ATLAS_INT_BASE + 22)
-#define ATLAS_INT_RES23                (ATLAS_INT_BASE + 23)
-#define ATLAS_INT_RES24                (ATLAS_INT_BASE + 24)
-#define ATLAS_INT_RES25                (ATLAS_INT_BASE + 25)
-#define ATLAS_INT_RES26                (ATLAS_INT_BASE + 26)
-#define ATLAS_INT_RES27                (ATLAS_INT_BASE + 27)
-#define ATLAS_INT_RES28                (ATLAS_INT_BASE + 28)
-#define ATLAS_INT_RES29                (ATLAS_INT_BASE + 29)
-#define ATLAS_INT_RES30                (ATLAS_INT_BASE + 30)
-#define ATLAS_INT_RES31                (ATLAS_INT_BASE + 31)
-#define ATLAS_INT_END          (ATLAS_INT_BASE + 31)
-
-/*
- * Interrupts 64..127 are used for Soc-it Classic interrupts
- */
-#define MSC01C_INT_BASE                64
-
-/* SOC-it Classic interrupt offsets */
-#define MSC01C_INT_TMR         0
-#define MSC01C_INT_PCI         1
-
-/*
- * Interrupts 64..127 are used for Soc-it EIC interrupts
- */
-#define MSC01E_INT_BASE                64
-
-/* SOC-it EIC interrupt offsets */
-#define        MSC01E_INT_SW0          1
-#define        MSC01E_INT_SW1          2
-#define        MSC01E_INT_MB0          3
-#define        MSC01E_INT_ATLAS        MSC01E_INT_MB0
-#define        MSC01E_INT_MB1          4
-#define        MSC01E_INT_MB2          5
-#define        MSC01E_INT_MB3          6
-#define        MSC01E_INT_MB4          7
-#define        MSC01E_INT_TMR          8
-#define        MSC01E_INT_PCI          9
-#define        MSC01E_INT_PERFCTR      10
-#define        MSC01E_INT_CPUCTR       11
-
-#endif /* !(_MIPS_ATLASINT_H) */