--- /dev/null
+/*
+ * OMAP1 Special OptimiSed Screen Interface support
+ *
+ * Copyright (C) 2004-2005 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/omapfb.h>
+
+#include "lcdc.h"
+
+#define MODULE_NAME "omapfb-sossi"
+
+#define OMAP_SOSSI_BASE 0xfffbac00
+#define SOSSI_ID_REG 0x00
+#define SOSSI_INIT1_REG 0x04
+#define SOSSI_INIT2_REG 0x08
+#define SOSSI_INIT3_REG 0x0c
+#define SOSSI_FIFO_REG 0x10
+#define SOSSI_REOTABLE_REG 0x14
+#define SOSSI_TEARING_REG 0x18
+#define SOSSI_INIT1B_REG 0x1c
+#define SOSSI_FIFOB_REG 0x20
+
+#define DMA_GSCR 0xfffedc04
+#define DMA_LCD_CCR 0xfffee3c2
+#define DMA_LCD_CTRL 0xfffee3c4
+#define DMA_LCD_LCH_CTRL 0xfffee3ea
+
+#define CONF_SOSSI_RESET_R (1 << 23)
+
+#define RD_ACCESS 0
+#define WR_ACCESS 1
+
+#define SOSSI_MAX_XMIT_BYTES (512 * 1024)
+
+static struct {
+ void __iomem *base;
+ struct clk *fck;
+ unsigned long fck_hz;
+ spinlock_t lock;
+ int bus_pick_count;
+ int bus_pick_width;
+ int tearsync_mode;
+ int tearsync_line;
+ void (*lcdc_callback)(void *data);
+ void *lcdc_callback_data;
+ int vsync_dma_pending;
+ /* timing for read and write access */
+ int clk_div;
+ u8 clk_tw0[2];
+ u8 clk_tw1[2];
+ /*
+ * if last_access is the same as current we don't have to change
+ * the timings
+ */
+ int last_access;
+
+ struct omapfb_device *fbdev;
+} sossi;
+
+static inline u32 sossi_read_reg(int reg)
+{
+ return readl(sossi.base + reg);
+}
+
+static inline u16 sossi_read_reg16(int reg)
+{
+ return readw(sossi.base + reg);
+}
+
+static inline u8 sossi_read_reg8(int reg)
+{
+ return readb(sossi.base + reg);
+}
+
+static inline void sossi_write_reg(int reg, u32 value)
+{
+ writel(value, sossi.base + reg);
+}
+
+static inline void sossi_write_reg16(int reg, u16 value)
+{
+ writew(value, sossi.base + reg);
+}
+
+static inline void sossi_write_reg8(int reg, u8 value)
+{
+ writeb(value, sossi.base + reg);
+}
+
+static void sossi_set_bits(int reg, u32 bits)
+{
+ sossi_write_reg(reg, sossi_read_reg(reg) | bits);
+}
+
+static void sossi_clear_bits(int reg, u32 bits)
+{
+ sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
+}
+
+#define HZ_TO_PS(x) (1000000000 / (x / 1000))
+
+static u32 ps_to_sossi_ticks(u32 ps, int div)
+{
+ u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
+ return (clk_period + ps - 1) / clk_period;
+}
+
+static int calc_rd_timings(struct extif_timings *t)
+{
+ u32 tw0, tw1;
+ int reon, reoff, recyc, actim;
+ int div = t->clk_div;
+
+ /*
+ * Make sure that after conversion it still holds that:
+ * reoff > reon, recyc >= reoff, actim > reon
+ */
+ reon = ps_to_sossi_ticks(t->re_on_time, div);
+ /* reon will be exactly one sossi tick */
+ if (reon > 1)
+ return -1;
+
+ reoff = ps_to_sossi_ticks(t->re_off_time, div);
+
+ if (reoff <= reon)
+ reoff = reon + 1;
+
+ tw0 = reoff - reon;
+ if (tw0 > 0x10)
+ return -1;
+
+ recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
+ if (recyc <= reoff)
+ recyc = reoff + 1;
+
+ tw1 = recyc - tw0;
+ /* values less then 3 result in the SOSSI block resetting itself */
+ if (tw1 < 3)
+ tw1 = 3;
+ if (tw1 > 0x40)
+ return -1;
+
+ actim = ps_to_sossi_ticks(t->access_time, div);
+ if (actim < reoff)
+ actim++;
+ /*
+ * access time (data hold time) will be exactly one sossi
+ * tick
+ */
+ if (actim - reoff > 1)
+ return -1;
+
+ t->tim[0] = tw0 - 1;
+ t->tim[1] = tw1 - 1;
+
+ return 0;
+}
+
+static int calc_wr_timings(struct extif_timings *t)
+{
+ u32 tw0, tw1;
+ int weon, weoff, wecyc;
+ int div = t->clk_div;
+
+ /*
+ * Make sure that after conversion it still holds that:
+ * weoff > weon, wecyc >= weoff
+ */
+ weon = ps_to_sossi_ticks(t->we_on_time, div);
+ /* weon will be exactly one sossi tick */
+ if (weon > 1)
+ return -1;
+
+ weoff = ps_to_sossi_ticks(t->we_off_time, div);
+ if (weoff <= weon)
+ weoff = weon + 1;
+ tw0 = weoff - weon;
+ if (tw0 > 0x10)
+ return -1;
+
+ wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
+ if (wecyc <= weoff)
+ wecyc = weoff + 1;
+
+ tw1 = wecyc - tw0;
+ /* values less then 3 result in the SOSSI block resetting itself */
+ if (tw1 < 3)
+ tw1 = 3;
+ if (tw1 > 0x40)
+ return -1;
+
+ t->tim[2] = tw0 - 1;
+ t->tim[3] = tw1 - 1;
+
+ return 0;
+}
+
+static void _set_timing(int div, int tw0, int tw1)
+{
+ u32 l;
+
+#ifdef VERBOSE
+ dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
+ tw0 + 1, tw1 + 1, div);
+#endif
+
+ clk_set_rate(sossi.fck, sossi.fck_hz / div);
+ clk_enable(sossi.fck);
+ l = sossi_read_reg(SOSSI_INIT1_REG);
+ l &= ~((0x0f << 20) | (0x3f << 24));
+ l |= (tw0 << 20) | (tw1 << 24);
+ sossi_write_reg(SOSSI_INIT1_REG, l);
+ clk_disable(sossi.fck);
+}
+
+static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
+{
+ u32 l;
+
+ l = sossi_read_reg(SOSSI_INIT3_REG);
+ l &= ~0x3ff;
+ l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
+ sossi_write_reg(SOSSI_INIT3_REG, l);
+}
+
+static void _set_tearsync_mode(int mode, unsigned line)
+{
+ u32 l;
+
+ l = sossi_read_reg(SOSSI_TEARING_REG);
+ l &= ~(((1 << 11) - 1) << 15);
+ l |= line << 15;
+ l &= ~(0x3 << 26);
+ l |= mode << 26;
+ sossi_write_reg(SOSSI_TEARING_REG, l);
+ if (mode)
+ sossi_set_bits(SOSSI_INIT2_REG, 1 << 6); /* TE logic */
+ else
+ sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
+}
+
+static inline void set_timing(int access)
+{
+ if (access != sossi.last_access) {
+ sossi.last_access = access;
+ _set_timing(sossi.clk_div,
+ sossi.clk_tw0[access], sossi.clk_tw1[access]);
+ }
+}
+
+static void sossi_start_transfer(void)
+{
+ /* WE */
+ sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
+ /* CS active low */
+ sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
+}
+
+static void sossi_stop_transfer(void)
+{
+ /* WE */
+ sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
+ /* CS active low */
+ sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
+}
+
+static void wait_end_of_write(void)
+{
+ /* Before reading we must check if some writings are going on */
+ while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
+}
+
+static void send_data(const void *data, unsigned int len)
+{
+ while (len >= 4) {
+ sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
+ len -= 4;
+ data += 4;
+ }
+ while (len >= 2) {
+ sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
+ len -= 2;
+ data += 2;
+ }
+ while (len) {
+ sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
+ len--;
+ data++;
+ }
+}
+
+static void set_cycles(unsigned int len)
+{
+ unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
+
+ BUG_ON((nr_cycles - 1) & ~0x3ffff);
+
+ sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
+ sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
+}
+
+static int sossi_convert_timings(struct extif_timings *t)
+{
+ int r = 0;
+ int div = t->clk_div;
+
+ t->converted = 0;
+
+ if (div <= 0 || div > 8)
+ return -1;
+
+ /* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
+ if ((r = calc_rd_timings(t)) < 0)
+ return r;
+
+ if ((r = calc_wr_timings(t)) < 0)
+ return r;
+
+ t->tim[4] = div;
+
+ t->converted = 1;
+
+ return 0;
+}
+
+static void sossi_set_timings(const struct extif_timings *t)
+{
+ BUG_ON(!t->converted);
+
+ sossi.clk_tw0[RD_ACCESS] = t->tim[0];
+ sossi.clk_tw1[RD_ACCESS] = t->tim[1];
+
+ sossi.clk_tw0[WR_ACCESS] = t->tim[2];
+ sossi.clk_tw1[WR_ACCESS] = t->tim[3];
+
+ sossi.clk_div = t->tim[4];
+}
+
+static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
+{
+ *clk_period = HZ_TO_PS(sossi.fck_hz);
+ *max_clk_div = 8;
+}
+
+static void sossi_set_bits_per_cycle(int bpc)
+{
+ int bus_pick_count, bus_pick_width;
+
+ /*
+ * We set explicitly the the bus_pick_count as well, although
+ * with remapping/reordering disabled it will be calculated by HW
+ * as (32 / bus_pick_width).
+ */
+ switch (bpc) {
+ case 8:
+ bus_pick_count = 4;
+ bus_pick_width = 8;
+ break;
+ case 16:
+ bus_pick_count = 2;
+ bus_pick_width = 16;
+ break;
+ default:
+ BUG();
+ return;
+ }
+ sossi.bus_pick_width = bus_pick_width;
+ sossi.bus_pick_count = bus_pick_count;
+}
+
+static int sossi_setup_tearsync(unsigned pin_cnt,
+ unsigned hs_pulse_time, unsigned vs_pulse_time,
+ int hs_pol_inv, int vs_pol_inv, int div)
+{
+ int hs, vs;
+ u32 l;
+
+ if (pin_cnt != 1 || div < 1 || div > 8)
+ return -EINVAL;
+
+ hs = ps_to_sossi_ticks(hs_pulse_time, div);
+ vs = ps_to_sossi_ticks(vs_pulse_time, div);
+ if (vs < 8 || vs <= hs || vs >= (1 << 12))
+ return -EDOM;
+ vs /= 8;
+ vs--;
+ if (hs > 8)
+ hs = 8;
+ if (hs)
+ hs--;
+
+ dev_dbg(sossi.fbdev->dev,
+ "setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
+ hs, vs, hs_pol_inv, vs_pol_inv);
+
+ clk_enable(sossi.fck);
+ l = sossi_read_reg(SOSSI_TEARING_REG);
+ l &= ~((1 << 15) - 1);
+ l |= vs << 3;
+ l |= hs;
+ if (hs_pol_inv)
+ l |= 1 << 29;
+ else
+ l &= ~(1 << 29);
+ if (vs_pol_inv)
+ l |= 1 << 28;
+ else
+ l &= ~(1 << 28);
+ sossi_write_reg(SOSSI_TEARING_REG, l);
+ clk_disable(sossi.fck);
+
+ return 0;
+}
+
+static int sossi_enable_tearsync(int enable, unsigned line)
+{
+ int mode;
+
+ dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
+ if (line >= 1 << 11)
+ return -EINVAL;
+ if (enable) {
+ if (line)
+ mode = 2; /* HS or VS */
+ else
+ mode = 3; /* VS only */
+ } else
+ mode = 0;
+ sossi.tearsync_line = line;
+ sossi.tearsync_mode = mode;
+
+ return 0;
+}
+
+static void sossi_write_command(const void *data, unsigned int len)
+{
+ clk_enable(sossi.fck);
+ set_timing(WR_ACCESS);
+ _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+ /* CMD#/DATA */
+ sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
+ set_cycles(len);
+ sossi_start_transfer();
+ send_data(data, len);
+ sossi_stop_transfer();
+ wait_end_of_write();
+ clk_disable(sossi.fck);
+}
+
+static void sossi_write_data(const void *data, unsigned int len)
+{
+ clk_enable(sossi.fck);
+ set_timing(WR_ACCESS);
+ _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+ /* CMD#/DATA */
+ sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+ set_cycles(len);
+ sossi_start_transfer();
+ send_data(data, len);
+ sossi_stop_transfer();
+ wait_end_of_write();
+ clk_disable(sossi.fck);
+}
+
+static void sossi_transfer_area(int width, int height,
+ void (callback)(void *data), void *data)
+{
+ BUG_ON(callback == NULL);
+
+ sossi.lcdc_callback = callback;
+ sossi.lcdc_callback_data = data;
+
+ clk_enable(sossi.fck);
+ set_timing(WR_ACCESS);
+ _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+ _set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
+ /* CMD#/DATA */
+ sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+ set_cycles(width * height * sossi.bus_pick_width / 8);
+
+ sossi_start_transfer();
+ if (sossi.tearsync_mode) {
+ /*
+ * Wait for the sync signal and start the transfer only
+ * then. We can't seem to be able to use HW sync DMA for
+ * this since LCD DMA shows huge latencies, as if it
+ * would ignore some of the DMA requests from SoSSI.
+ */
+ unsigned long flags;
+
+ spin_lock_irqsave(&sossi.lock, flags);
+ sossi.vsync_dma_pending++;
+ spin_unlock_irqrestore(&sossi.lock, flags);
+ } else
+ /* Just start the transfer right away. */
+ omap_enable_lcd_dma();
+}
+
+static void sossi_dma_callback(void *data)
+{
+ omap_stop_lcd_dma();
+ sossi_stop_transfer();
+ clk_disable(sossi.fck);
+ sossi.lcdc_callback(sossi.lcdc_callback_data);
+}
+
+static void sossi_read_data(void *data, unsigned int len)
+{
+ clk_enable(sossi.fck);
+ set_timing(RD_ACCESS);
+ _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+ /* CMD#/DATA */
+ sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+ set_cycles(len);
+ sossi_start_transfer();
+ while (len >= 4) {
+ *(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
+ len -= 4;
+ data += 4;
+ }
+ while (len >= 2) {
+ *(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
+ len -= 2;
+ data += 2;
+ }
+ while (len) {
+ *(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
+ len--;
+ data++;
+ }
+ sossi_stop_transfer();
+ clk_disable(sossi.fck);
+}
+
+static irqreturn_t sossi_match_irq(int irq, void *data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sossi.lock, flags);
+ if (sossi.vsync_dma_pending) {
+ sossi.vsync_dma_pending--;
+ omap_enable_lcd_dma();
+ }
+ spin_unlock_irqrestore(&sossi.lock, flags);
+ return IRQ_HANDLED;
+}
+
+static int sossi_init(struct omapfb_device *fbdev)
+{
+ u32 l, k;
+ struct clk *fck;
+ struct clk *dpll1out_ck;
+ int r;
+
+ sossi.base = (void __iomem *)IO_ADDRESS(OMAP_SOSSI_BASE);
+ sossi.fbdev = fbdev;
+ spin_lock_init(&sossi.lock);
+
+ dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
+ if (IS_ERR(dpll1out_ck)) {
+ dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
+ return PTR_ERR(dpll1out_ck);
+ }
+ /*
+ * We need the parent clock rate, which we might divide further
+ * depending on the timing requirements of the controller. See
+ * _set_timings.
+ */
+ sossi.fck_hz = clk_get_rate(dpll1out_ck);
+ clk_put(dpll1out_ck);
+
+ fck = clk_get(fbdev->dev, "ck_sossi");
+ if (IS_ERR(fck)) {
+ dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
+ return PTR_ERR(fck);
+ }
+ sossi.fck = fck;
+
+ /* Reset and enable the SoSSI module */
+ l = omap_readl(MOD_CONF_CTRL_1);
+ l |= CONF_SOSSI_RESET_R;
+ omap_writel(l, MOD_CONF_CTRL_1);
+ l &= ~CONF_SOSSI_RESET_R;
+ omap_writel(l, MOD_CONF_CTRL_1);
+
+ clk_enable(sossi.fck);
+ l = omap_readl(ARM_IDLECT2);
+ l &= ~(1 << 8); /* DMACK_REQ */
+ omap_writel(l, ARM_IDLECT2);
+
+ l = sossi_read_reg(SOSSI_INIT2_REG);
+ /* Enable and reset the SoSSI block */
+ l |= (1 << 0) | (1 << 1);
+ sossi_write_reg(SOSSI_INIT2_REG, l);
+ /* Take SoSSI out of reset */
+ l &= ~(1 << 1);
+ sossi_write_reg(SOSSI_INIT2_REG, l);
+
+ sossi_write_reg(SOSSI_ID_REG, 0);
+ l = sossi_read_reg(SOSSI_ID_REG);
+ k = sossi_read_reg(SOSSI_ID_REG);
+
+ if (l != 0x55555555 || k != 0xaaaaaaaa) {
+ dev_err(fbdev->dev,
+ "invalid SoSSI sync pattern: %08x, %08x\n", l, k);
+ r = -ENODEV;
+ goto err;
+ }
+
+ if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
+ dev_err(fbdev->dev, "can't get LCDC IRQ\n");
+ r = -ENODEV;
+ goto err;
+ }
+
+ l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
+ l = sossi_read_reg(SOSSI_ID_REG);
+ dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
+ l >> 16, l & 0xffff);
+
+ l = sossi_read_reg(SOSSI_INIT1_REG);
+ l |= (1 << 19); /* DMA_MODE */
+ l &= ~(1 << 31); /* REORDERING */
+ sossi_write_reg(SOSSI_INIT1_REG, l);
+
+ if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
+ IRQT_FALLING,
+ "sossi_match", sossi.fbdev->dev)) < 0) {
+ dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
+ goto err;
+ }
+
+ clk_disable(sossi.fck);
+ return 0;
+
+err:
+ clk_disable(sossi.fck);
+ clk_put(sossi.fck);
+ return r;
+}
+
+static void sossi_cleanup(void)
+{
+ omap_lcdc_free_dma_callback();
+ clk_put(sossi.fck);
+}
+
+struct lcd_ctrl_extif omap1_ext_if = {
+ .init = sossi_init,
+ .cleanup = sossi_cleanup,
+ .get_clk_info = sossi_get_clk_info,
+ .convert_timings = sossi_convert_timings,
+ .set_timings = sossi_set_timings,
+ .set_bits_per_cycle = sossi_set_bits_per_cycle,
+ .setup_tearsync = sossi_setup_tearsync,
+ .enable_tearsync = sossi_enable_tearsync,
+ .write_command = sossi_write_command,
+ .read_data = sossi_read_data,
+ .write_data = sossi_write_data,
+ .transfer_area = sossi_transfer_area,
+
+ .max_transmit_size = SOSSI_MAX_XMIT_BYTES,
+};
+
projects / linux-2.6-omap-h63xx.git / commitdiff