]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
usb: cdc-acm: drain writes on close
authorDavid Brownell <dbrownell@users.sourceforge.net>
Thu, 7 Aug 2008 01:46:10 +0000 (18:46 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Thu, 14 Aug 2008 00:32:57 +0000 (17:32 -0700)
Add a mechanism to let the write queue drain naturally before
closing the TTY, rather than always losing that data.  There
is a timeout, so it can't wait too long.

Provide missing locking inside acm_wb_is_avail(); it matters
more now.  Note, this presumes an earlier patch was applied,
removing a call to this routine where the lock was held.

Slightly improved diagnostics on write URB completion, so we
can tell when a write URB gets killed and, if so, how much
data it wrote first ... and so that I/O path is normally
silent (and can't much change timings).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/class/cdc-acm.c
drivers/usb/class/cdc-acm.h

index a9dd28f446d8f1fad580eda15ff2c75dc49afc75..efc4373ededb4ea1f15a31f8c32716f1333be6a2 100644 (file)
@@ -51,6 +51,7 @@
  */
 
 #undef DEBUG
+#undef VERBOSE_DEBUG
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -70,6 +71,9 @@
 
 #include "cdc-acm.h"
 
+
+#define ACM_CLOSE_TIMEOUT      15      /* seconds to let writes drain */
+
 /*
  * Version Information
  */
@@ -85,6 +89,12 @@ static DEFINE_MUTEX(open_mutex);
 
 #define ACM_READY(acm) (acm && acm->dev && acm->used)
 
+#ifdef VERBOSE_DEBUG
+#define verbose        1
+#else
+#define verbose        0
+#endif
+
 /*
  * Functions for ACM control messages.
  */
@@ -136,11 +146,14 @@ static int acm_wb_alloc(struct acm *acm)
 static int acm_wb_is_avail(struct acm *acm)
 {
        int i, n;
+       unsigned long flags;
 
        n = ACM_NW;
+       spin_lock_irqsave(&acm->write_lock, flags);
        for (i = 0; i < ACM_NW; i++) {
                n -= acm->wb[i].use;
        }
+       spin_unlock_irqrestore(&acm->write_lock, flags);
        return n;
 }
 
@@ -467,22 +480,28 @@ urbs:
 /* data interface wrote those outgoing bytes */
 static void acm_write_bulk(struct urb *urb)
 {
-       struct acm *acm;
        struct acm_wb *wb = urb->context;
+       struct acm *acm = wb->instance;
 
-       dbg("Entering acm_write_bulk with status %d", urb->status);
+       if (verbose || urb->status
+                       || (urb->actual_length != urb->transfer_buffer_length))
+               dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n",
+                       urb->actual_length,
+                       urb->transfer_buffer_length,
+                       urb->status);
 
-       acm = wb->instance;
        acm_write_done(acm, wb);
        if (ACM_READY(acm))
                schedule_work(&acm->work);
+       else
+               wake_up_interruptible(&acm->drain_wait);
 }
 
 static void acm_softint(struct work_struct *work)
 {
        struct acm *acm = container_of(work, struct acm, work);
-       dbg("Entering acm_softint.");
-       
+
+       dev_vdbg(&acm->data->dev, "tx work\n");
        if (!ACM_READY(acm))
                return;
        tty_wakeup(acm->tty);
@@ -603,6 +622,8 @@ static void acm_tty_unregister(struct acm *acm)
        kfree(acm);
 }
 
+static int acm_tty_chars_in_buffer(struct tty_struct *tty);
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
        struct acm *acm = tty->driver_data;
@@ -617,6 +638,13 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
                if (acm->dev) {
                        usb_autopm_get_interface(acm->control);
                        acm_set_control(acm, acm->ctrlout = 0);
+
+                       /* try letting the last writes drain naturally */
+                       wait_event_interruptible_timeout(acm->drain_wait,
+                                       (ACM_NW == acm_wb_is_avail(acm))
+                                               || !acm->dev,
+                                       ACM_CLOSE_TIMEOUT * HZ);
+
                        usb_kill_urb(acm->ctrlurb);
                        for (i = 0; i < ACM_NW; i++)
                                usb_kill_urb(acm->wb[i].urb);
@@ -1047,6 +1075,7 @@ skip_normal_probe:
        acm->urb_task.data = (unsigned long) acm;
        INIT_WORK(&acm->work, acm_softint);
        INIT_WORK(&acm->waker, acm_waker);
+       init_waitqueue_head(&acm->drain_wait);
        spin_lock_init(&acm->throttle_lock);
        spin_lock_init(&acm->write_lock);
        spin_lock_init(&acm->read_lock);
index 94266362ca68a80c50606a63515791a0d9cf2cec..1f95e7aa1b665618bc1fa83f6b9977375a026298 100644 (file)
@@ -113,6 +113,7 @@ struct acm {
        struct usb_cdc_line_coding line;                /* bits, stop, parity */
        struct work_struct work;                        /* work queue entry for line discipline waking up */
        struct work_struct waker;
+       wait_queue_head_t drain_wait;                   /* close processing */
        struct tasklet_struct urb_task;                 /* rx processing */
        spinlock_t throttle_lock;                       /* synchronize throtteling and read callback */
        unsigned int ctrlin;                            /* input control lines (DCD, DSR, RI, break, overruns) */