]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
hwmon: (ds1621) Avoid unneeded register access
authorJean Delvare <khali@linux-fr.org>
Mon, 30 Mar 2009 19:46:40 +0000 (21:46 +0200)
committerJean Delvare <khali@linux-fr.org>
Mon, 30 Mar 2009 19:46:40 +0000 (21:46 +0200)
Register access over SMBus isn't cheap, so avoid register access where
possible:
* Only write back the configuration register if it changed.
* Don't refresh the register cache when we don't have to.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
drivers/hwmon/ds1621.c

index fe160c54b959a03a2df4d997a961e1fc9e29dc69..53f88f5118167a8e3ebfb392ed199fb3f3c31175 100644 (file)
@@ -101,17 +101,20 @@ static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
 
 static void ds1621_init_client(struct i2c_client *client)
 {
-       int reg = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+       u8 conf, new_conf;
+
+       new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
        /* switch to continuous conversion mode */
-       reg &= ~ DS1621_REG_CONFIG_1SHOT;
+       new_conf &= ~DS1621_REG_CONFIG_1SHOT;
 
        /* setup output polarity */
        if (polarity == 0)
-               reg &= ~DS1621_REG_CONFIG_POLARITY;
+               new_conf &= ~DS1621_REG_CONFIG_POLARITY;
        else if (polarity == 1)
-               reg |= DS1621_REG_CONFIG_POLARITY;
+               new_conf |= DS1621_REG_CONFIG_POLARITY;
        
-       i2c_smbus_write_byte_data(client, DS1621_REG_CONF, reg);
+       if (conf != new_conf)
+               i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
        
        /* start conversion */
        i2c_smbus_write_byte(client, DS1621_COM_START);
@@ -170,7 +173,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *da,
 {
        struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
        struct i2c_client *client = to_i2c_client(dev);
-       struct ds1621_data *data = ds1621_update_client(dev);
+       struct ds1621_data *data = i2c_get_clientdata(client);
        u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
 
        mutex_lock(&data->update_lock);