]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
iwlwifi: add TX aggregation code for 5000 HW
authorTomas Winkler <tomas.winkler@intel.com>
Thu, 12 Jun 2008 01:46:56 +0000 (09:46 +0800)
committerJohn W. Linville <linville@tuxdriver.com>
Sat, 14 Jun 2008 16:18:06 +0000 (12:18 -0400)
This patch adds TX aggregation handler for 5000 HW.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/iwlwifi/iwl-5000.c

index 0ae5421c81c79104493351b57c929905b5eb57ac..d3c0e10397c8eaa58f2724fde03699b9bad75c12 100644 (file)
@@ -41,6 +41,7 @@
 #include "iwl-dev.h"
 #include "iwl-core.h"
 #include "iwl-io.h"
+#include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
 
@@ -976,6 +977,135 @@ static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
        }
 }
 
+static int iwl5000_tx_queue_set_q2ratid(struct iwl_priv *priv, u16 ra_tid,
+                                       u16 txq_id)
+{
+       u32 tbl_dw_addr;
+       u32 tbl_dw;
+       u16 scd_q2ratid;
+
+       scd_q2ratid = ra_tid & IWL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
+
+       tbl_dw_addr = priv->scd_base_addr +
+                       IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
+
+       tbl_dw = iwl_read_targ_mem(priv, tbl_dw_addr);
+
+       if (txq_id & 0x1)
+               tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
+       else
+               tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
+
+       iwl_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
+
+       return 0;
+}
+static void iwl5000_tx_queue_stop_scheduler(struct iwl_priv *priv, u16 txq_id)
+{
+       /* Simply stop the queue, but don't change any configuration;
+        * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
+       iwl_write_prph(priv,
+               IWL50_SCD_QUEUE_STATUS_BITS(txq_id),
+               (0 << IWL50_SCD_QUEUE_STTS_REG_POS_ACTIVE)|
+               (1 << IWL50_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
+}
+
+static int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
+                                 int tx_fifo, int sta_id, int tid, u16 ssn_idx)
+{
+       unsigned long flags;
+       int ret;
+       u16 ra_tid;
+
+       if (IWL50_FIRST_AMPDU_QUEUE > txq_id)
+               IWL_WARNING("queue number too small: %d, must be > %d\n",
+                       txq_id, IWL50_FIRST_AMPDU_QUEUE);
+
+       ra_tid = BUILD_RAxTID(sta_id, tid);
+
+       /* Modify device's station table to Tx this TID */
+       iwl_sta_modify_enable_tid_tx(priv, sta_id, tid);
+
+       spin_lock_irqsave(&priv->lock, flags);
+       ret = iwl_grab_nic_access(priv);
+       if (ret) {
+               spin_unlock_irqrestore(&priv->lock, flags);
+               return ret;
+       }
+
+       /* Stop this Tx queue before configuring it */
+       iwl5000_tx_queue_stop_scheduler(priv, txq_id);
+
+       /* Map receiver-address / traffic-ID to this queue */
+       iwl5000_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
+
+       /* Set this queue as a chain-building queue */
+       iwl_set_bits_prph(priv, IWL50_SCD_QUEUECHAIN_SEL, (1<<txq_id));
+
+       /* enable aggregations for the queue */
+       iwl_set_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1<<txq_id));
+
+       /* Place first TFD at index corresponding to start sequence number.
+        * Assumes that ssn_idx is valid (!= 0xFFF) */
+       priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+       priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+       iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx);
+
+       /* Set up Tx window size and frame limit for this queue */
+       iwl_write_targ_mem(priv, priv->scd_base_addr +
+                       IWL50_SCD_CONTEXT_QUEUE_OFFSET(txq_id) +
+                       sizeof(u32),
+                       ((SCD_WIN_SIZE <<
+                       IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) &
+                       IWL50_SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) |
+                       ((SCD_FRAME_LIMIT <<
+                       IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+                       IWL50_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK));
+
+       iwl_set_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
+
+       /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
+       iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
+
+       iwl_release_nic_access(priv);
+       spin_unlock_irqrestore(&priv->lock, flags);
+
+       return 0;
+}
+
+static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
+                                  u16 ssn_idx, u8 tx_fifo)
+{
+       int ret;
+
+       if (IWL50_FIRST_AMPDU_QUEUE > txq_id) {
+               IWL_WARNING("queue number too small: %d, must be > %d\n",
+                               txq_id, IWL50_FIRST_AMPDU_QUEUE);
+               return -EINVAL;
+       }
+
+       ret = iwl_grab_nic_access(priv);
+       if (ret)
+               return ret;
+
+       iwl5000_tx_queue_stop_scheduler(priv, txq_id);
+
+       iwl_clear_bits_prph(priv, IWL50_SCD_AGGR_SEL, (1 << txq_id));
+
+       priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+       priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+       /* supposes that ssn_idx is valid (!= 0xFFF) */
+       iwl5000_set_wr_ptrs(priv, txq_id, ssn_idx);
+
+       iwl_clear_bits_prph(priv, IWL50_SCD_INTERRUPT_MASK, (1 << txq_id));
+       iwl_txq_ctx_deactivate(priv, txq_id);
+       iwl5000_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
+
+       iwl_release_nic_access(priv);
+
+       return 0;
+}
+
 static u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
 {
        u16 size = (u16)sizeof(struct iwl_addsta_cmd);
@@ -1319,6 +1449,8 @@ static struct iwl_lib_ops iwl5000_lib = {
        .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
        .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
        .txq_set_sched = iwl5000_txq_set_sched,
+       .txq_agg_enable = iwl5000_txq_agg_enable,
+       .txq_agg_disable = iwl5000_txq_agg_disable,
        .rx_handler_setup = iwl5000_rx_handler_setup,
        .setup_deferred_work = iwl5000_setup_deferred_work,
        .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,