[POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

This adds device nodes for the PCI bridges as well as the ISA devices on
the newer revision MPC8641HPCN.  It also adds the PCI ranges to the soc
node so that address translation for the ISA devices works properly.

Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 748f7b90f5dbc1d0289a8e3bdce3ce1f71d6aef4..393cfdf92ff5401d39f2e742f49e4c8baec0f82f 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -56,8 +56,12 @@
                #size-cells = <1>;
                #interrupt-cells = <2>;
                device_type = "soc";
-               ranges = <0 f8000000 00100000>;
-               reg = <f8000000 00100000>;      // CCSRBAR 1M
+               ranges = <00001000 f8001000 000ff000
+                         80000000 80000000 20000000
+                         e2000000 e2000000 00100000
+                         a0000000 a0000000 20000000
+                         e3000000 e3000000 00100000>;
+               reg = <f8000000 00001000>;      // CCSRBAR
                bus-frequency = <0>;
 
                i2c@3000 {
@@ -285,17 +289,84 @@
                                f800 0 0 3 &i8259 0 0
                                f800 0 0 4 &i8259 0 0
                                >;
-                       i8259: i8259@4d0 {
-                               clock-frequency = <0>;
-                               interrupt-controller;
-                               device_type = "interrupt-controller";
-                               #address-cells = <0>;
-                               #interrupt-cells = <2>;
-                               built-in;
-                               compatible = "chrp,iic";
-                               big-endian;
-                               interrupts = <49 2>;
-                               interrupt-parent = <&mpic>;
+                       uli1575@0 {
+                               reg = <0 0 0 0 0>;
+                               #size-cells = <2>;
+                               #address-cells = <3>;
+                               ranges = <02000000 0 80000000
+                                         02000000 0 80000000
+                                         0 20000000
+                                         01000000 0 00000000
+                                         01000000 0 00000000
+                                         0 00100000>;
+
+                               pci_bridge@0 {
+                                       reg = <0 0 0 0 0>;
+                                       #size-cells = <2>;
+                                       #address-cells = <3>;
+                                       ranges = <02000000 0 80000000
+                                                 02000000 0 80000000
+                                                 0 20000000
+                                                 01000000 0 00000000
+                                                 01000000 0 00000000
+                                                 0 00100000>;
+
+                                       isa@1e {
+                                               device_type = "isa";
+                                               #interrupt-cells = <2>;
+                                               #size-cells = <1>;
+                                               #address-cells = <2>;
+                                               reg = <f000 0 0 0 0>;
+                                               ranges = <1 0 01000000 0 0
+                                                         00001000>;
+                                               interrupt-parent = <&i8259>;
+
+                                               i8259: interrupt-controller@20 {
+                                                       reg = <1 20 2
+                                                              1 a0 2
+                                                              1 4d0 2>;
+                                                       clock-frequency = <0>;
+                                                       interrupt-controller;
+                                                       device_type = "interrupt-controller";
+                                                       #address-cells = <0>;
+                                                       #interrupt-cells = <2>;
+                                                       built-in;
+                                                       compatible = "chrp,iic";
+                                                       interrupts = <49 2>;
+                                                       interrupt-parent =
+                                                               <&mpic>;
+                                               };
+
+                                               i8042@60 {
+                                                       #size-cells = <0>;
+                                                       #address-cells = <1>;
+                                                       reg = <1 60 1 1 64 1>;
+                                                       interrupts = <1 3 c 3>;
+                                                       interrupt-parent =
+                                                               <&i8259>;
+
+                                                       keyboard@0 {
+                                                               reg = <0>;
+                                                               compatible = "pnpPNP,303";
+                                                       };
+
+                                                       mouse@1 {
+                                                               reg = <1>;
+                                                               compatible = "pnpPNP,f03";
+                                                       };
+                                               };
+
+                                               rtc@70 {
+                                                       compatible =
+                                                               "pnpPNP,b00";
+                                                       reg = <1 70 2>;
+                                               };
+
+                                               gpio@400 {
+                                                       reg = <1 400 80>;
+                                               };
+                                       };
+                               };
                        };
 
                };