ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \
x8664_ksyms.o i387.o syscall.o vsyscall.o \
setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \
- pci-dma.o pci-nommu.o alternative.o
+ pci-dma.o pci-nommu.o alternative.o early-quirks.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_X86_MCE) += mce.o
--- /dev/null
+/* Various workarounds for chipset bugs.
+ This code runs very early and can't use the regular PCI subsystem
+ The entries are keyed to PCI bridges which usually identify chipsets
+ uniquely.
+ This is only for whole classes of chipsets with specific problems which
+ need early invasive action (e.g. before the timers are initialized).
+ Most PCI device specific workarounds can be done later and should be
+ in standard PCI quirks
+ Mainboard specific bugs should be handled by DMI entries.
+ CPU specific bugs in setup.c */
+
+#include <linux/pci.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
+#include <asm/pci-direct.h>
+#include <asm/proto.h>
+#include <asm/dma.h>
+
+static void via_bugs(void)
+{
+#ifdef CONFIG_IOMMU
+ if ((end_pfn > MAX_DMA32_PFN || force_iommu) &&
+ !iommu_aperture_allowed) {
+ printk(KERN_INFO
+ "Looks like a VIA chipset. Disabling IOMMU. Override with iommu=allowed\n");
+ iommu_aperture_disabled = 1;
+ }
+#endif
+}
+
+#ifdef CONFIG_ACPI
+
+static int nvidia_hpet_detected __initdata;
+
+static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+{
+ nvidia_hpet_detected = 1;
+ return 0;
+}
+#endif
+
+static void nvidia_bugs(void)
+{
+#ifdef CONFIG_ACPI
+ /*
+ * All timer overrides on Nvidia are
+ * wrong unless HPET is enabled.
+ */
+ nvidia_hpet_detected = 0;
+ acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+ if (nvidia_hpet_detected == 0) {
+ acpi_skip_timer_override = 1;
+ printk(KERN_INFO "Nvidia board "
+ "detected. Ignoring ACPI "
+ "timer override.\n");
+ }
+#endif
+ /* RED-PEN skip them on mptables too? */
+
+}
+
+static void ati_bugs(void)
+{
+#if 1 /* for testing */
+ printk("ATI board detected\n");
+#endif
+ /* No bugs right now */
+}
+
+struct chipset {
+ u16 vendor;
+ void (*f)(void);
+};
+
+static struct chipset early_qrk[] = {
+ { PCI_VENDOR_ID_NVIDIA, nvidia_bugs },
+ { PCI_VENDOR_ID_VIA, via_bugs },
+ { PCI_VENDOR_ID_ATI, ati_bugs },
+ {}
+};
+
+void __init early_quirks(void)
+{
+ int num, slot, func;
+ /* Poor man's PCI discovery */
+ for (num = 0; num < 32; num++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ u32 class;
+ u32 vendor;
+ u8 type;
+ int i;
+ class = read_pci_config(num,slot,func,
+ PCI_CLASS_REVISION);
+ if (class == 0xffffffff)
+ break;
+
+ if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ vendor = read_pci_config(num, slot, func,
+ PCI_VENDOR_ID);
+ vendor &= 0xffff;
+
+ for (i = 0; early_qrk[i].f; i++)
+ if (early_qrk[i].vendor == vendor) {
+ early_qrk[i].f();
+ return;
+ }
+
+ type = read_pci_config_byte(num, slot, func,
+ PCI_HEADER_TYPE);
+ if (!(type & 0x80))
+ break;
+ }
+ }
+ }
+}
__setup("disable_8254_timer", setup_disable_8254_timer);
__setup("enable_8254_timer", setup_enable_8254_timer);
-#include <asm/pci-direct.h>
-#include <linux/pci_ids.h>
-#include <linux/pci.h>
-
-
-#ifdef CONFIG_ACPI
-
-static int nvidia_hpet_detected __initdata;
-
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
-{
- nvidia_hpet_detected = 1;
- return 0;
-}
-#endif
-
-/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
- off. Check for an Nvidia or VIA PCI bridge and turn it off.
- Use pci direct infrastructure because this runs before the PCI subsystem.
-
- Can be overwritten with "apic"
-
- And another hack to disable the IOMMU on VIA chipsets.
-
- ... and others. Really should move this somewhere else.
-
- Kludge-O-Rama. */
-void __init check_ioapic(void)
-{
- int num,slot,func;
- /* Poor man's PCI discovery */
- for (num = 0; num < 32; num++) {
- for (slot = 0; slot < 32; slot++) {
- for (func = 0; func < 8; func++) {
- u32 class;
- u32 vendor;
- u8 type;
- class = read_pci_config(num,slot,func,
- PCI_CLASS_REVISION);
- if (class == 0xffffffff)
- break;
-
- if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
- continue;
-
- vendor = read_pci_config(num, slot, func,
- PCI_VENDOR_ID);
- vendor &= 0xffff;
- switch (vendor) {
- case PCI_VENDOR_ID_VIA:
-#ifdef CONFIG_IOMMU
- if ((end_pfn > MAX_DMA32_PFN ||
- force_iommu) &&
- !iommu_aperture_allowed) {
- printk(KERN_INFO
- "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n");
- iommu_aperture_disabled = 1;
- }
-#endif
- return;
- case PCI_VENDOR_ID_NVIDIA:
-#ifdef CONFIG_ACPI
- /*
- * All timer overrides on Nvidia are
- * wrong unless HPET is enabled.
- */
- nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_HPET,
- nvidia_hpet_check);
- if (nvidia_hpet_detected == 0) {
- acpi_skip_timer_override = 1;
- printk(KERN_INFO "Nvidia board "
- "detected. Ignoring ACPI "
- "timer override.\n");
- }
-#endif
- /* RED-PEN skip them on mptables too? */
- return;
-
- /* This should be actually default, but
- for 2.6.16 let's do it for ATI only where
- it's really needed. */
- case PCI_VENDOR_ID_ATI:
- if (timer_over_8254 == 1) {
- timer_over_8254 = 0;
- printk(KERN_INFO
- "ATI board detected. Disabling timer routing over 8254.\n");
- }
- return;
- }
-
-
- /* No multi-function device? */
- type = read_pci_config_byte(num,slot,func,
- PCI_HEADER_TYPE);
- if (!(type & 0x80))
- break;
- }
- }
- }
-}
/*
* Find the IRQ entry number of a certain pin.
paging_init();
- check_ioapic();
+ early_quirks();
/*
* set this early, so we dont allocate cpu0
extern void setup_node_bootmem(int nodeid, unsigned long start, unsigned long end);
-extern void check_ioapic(void);
+extern void early_quirks(void);
extern void check_efer(void);
extern int unhandled_signal(struct task_struct *tsk, int sig);
projects / linux-2.6-omap-h63xx.git / commitdiff