ALSA: oxygen: fix distorted output on AK4396-based cards

When changing the sample rate, the CMI8788's master clock output becomes
unstable for a short time.  The AK4396 needs the master clock to do SPI
writes, so writing to an AK4396 control register directly after a sample
rate change will garble the value.  In our case, this leads to the DACs
being misconfigured to I2S sample format, which results in a wrong
output level and horrible distortions on samples louder than -6 dB.

To fix this, we need to wait until the new master clock signal has
become stable before doing SPI writes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 7442460583dde0c68f92f40c965afe8cbb461272..dad393ae040a2dc474f638ff8e95817bed95ed57 100644 (file)
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -17,6 +17,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <sound/control.h>
 #include <sound/core.h>
@@ -107,6 +108,9 @@ static void set_ak4396_params(struct oxygen *chip,
        else
                value |= AK4396_DFS_QUAD;
        data->ak4396_ctl2 = value;
+
+       msleep(1); /* wait for the new MCLK to become stable */
+
        ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
        ak4396_write(chip, AK4396_CONTROL_2, value);
        ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);

diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 7c8ae31eb4685b857488e931a55efcd8f4e1826e..c5829d30ef8640519becefaa8a2f2ca130523297 100644 (file)
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -28,6 +28,7 @@
  * GPIO 1 -> DFS1 of AK5385
  */
 
+#include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <sound/ac97_codec.h>
@@ -213,6 +214,9 @@ static void set_ak4396_params(struct oxygen *chip,
        else
                value |= AK4396_DFS_QUAD;
        data->ak4396_ctl2 = value;
+
+       msleep(1); /* wait for the new MCLK to become stable */
+
        for (i = 0; i < 4; ++i) {
                ak4396_write(chip, i,
                             AK4396_CONTROL_1, AK4396_DIF_24_MSB);