[PATCH] m68knommu: fix timer register access on 523x ColdFire platforms

The 523x timer TRR register is a full 32bits, the older register (on
other ColdFire parts) was only 16 bits.  Use the right type of
__raw_read when accessing it.

Problem found by Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c
index 24781f009337ae69a4b7e33e10b1697daf2edd50..e5668af19789ccae8e2843befd28f2749341d3ed 100644 (file)
--- a/arch/m68knommu/platform/5307/timers.c
+++ b/arch/m68knommu/platform/5307/timers.c
@@ -3,7 +3,7 @@
 /*
  *     timers.c -- generic ColdFire hardware timer support.
  *
- *     Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *     Copyright (C) 1999-2006, Greg Ungerer (gerg@snapgear.com)
  */
 
 /***************************************************************************/
@@ -44,6 +44,14 @@ unsigned int mcf_timerlevel = 5;
 extern void mcf_settimericr(int timer, int level);
 extern int mcf_timerirqpending(int timer);
 
+#if defined(CONFIG_M532x)
+#define        __raw_readtrr   __raw_readl
+#define        __raw_writetrr  __raw_writel
+#else
+#define        __raw_readtrr   __raw_readw
+#define        __raw_writetrr  __raw_writew
+#endif
+
 /***************************************************************************/
 
 void coldfire_tick(void)
@@ -57,7 +65,7 @@ void coldfire_tick(void)
 void coldfire_timer_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 {
        __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
-       __raw_writew(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
+       __raw_writetrr(((MCF_BUSCLK / 16) / HZ), TA(MCFTIMER_TRR));
        __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
                MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
 
@@ -76,7 +84,7 @@ unsigned long coldfire_timer_offset(void)
        unsigned long trr, tcn, offset;
 
        tcn = __raw_readw(TA(MCFTIMER_TCN));
-       trr = __raw_readw(TA(MCFTIMER_TRR));
+       trr = __raw_readtrr(TA(MCFTIMER_TRR));
        offset = (tcn * (1000000 / HZ)) / trr;
 
        /* Check if we just wrapped the counters and maybe missed a tick */
@@ -120,7 +128,7 @@ void coldfire_profile_init(void)
        /* Set up TIMER 2 as high speed profile clock */
        __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 
-       __raw_writew(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+       __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
        __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
                MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));