]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] aic94xx: handle REQ_DEVICE_RESET
authorDarrick J. Wong <djwong@us.ibm.com>
Wed, 8 Nov 2006 01:28:55 +0000 (17:28 -0800)
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>
Wed, 22 Nov 2006 17:05:59 +0000 (11:05 -0600)
This patch implements a REQ_DEVICE_RESET handler for the aic94xx
driver.  Like the earlier REQ_TASK_ABORT patch, this patch defers the
device reset to the Scsi_Host's workqueue, which has the added benefit
of ensuring that the device reset does not happen at the same time
that the abort tmfs are being processed.  After the phy reset, the
busted drive should go away and be re-detected later, which is indeed
what I've seen on both a x260 and a x206m.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/aic94xx/aic94xx_scb.c
drivers/scsi/libsas/sas_init.c
drivers/scsi/libsas/sas_scsi_host.c
include/scsi/libsas.h
include/scsi/scsi_transport_sas.h

index 1911c5d17875912f4e9692342ede45c284362a08..a014418d670e661731ca552d8b425ceca9fab48d 100644 (file)
@@ -343,6 +343,27 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
        }
 }
 
+/* hard reset a phy later */
+static void do_phy_reset_later(void *data)
+{
+       struct sas_phy *sas_phy = data;
+       int error;
+
+       ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__,
+                   sas_phy->identify.phy_identifier);
+       /* Reset device port */
+       error = sas_phy_reset(sas_phy, 1);
+       if (error)
+               ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n",
+                           __FUNCTION__, sas_phy->identify.phy_identifier, error);
+}
+
+static void phy_reset_later(struct sas_phy *sas_phy, struct Scsi_Host *shost)
+{
+       INIT_WORK(&sas_phy->reset_work, do_phy_reset_later, sas_phy);
+       queue_work(shost->work_q, &sas_phy->reset_work);
+}
+
 /* start up the ABORT TASK tmf... */
 static void task_kill_later(struct asd_ascb *ascb)
 {
@@ -402,7 +423,9 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
                goto out;
        }
        case REQ_DEVICE_RESET: {
-               struct asd_ascb *a, *b;
+               struct Scsi_Host *shost = sas_ha->core.shost;
+               struct sas_phy *dev_phy;
+               struct asd_ascb *a;
                u16 conn_handle;
 
                conn_handle = *((u16*)(&dl->status_block[1]));
@@ -412,17 +435,31 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
                            dl->status_block[3]);
 
                /* Kill all pending tasks and reset the device */
-               list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
-                       struct sas_task *task = a->uldd_task;
-                       struct domain_device *dev = task->dev;
+               dev_phy = NULL;
+               list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
+                       struct sas_task *task;
+                       struct domain_device *dev;
                        u16 x;
 
-                       x = *((u16*)(&dev->lldd_dev));
-                       if (x == conn_handle)
+                       task = a->uldd_task;
+                       if (!task)
+                               continue;
+                       dev = task->dev;
+
+                       x = (u16)dev->lldd_dev;
+                       if (x == conn_handle) {
+                               dev_phy = dev->port->phy;
                                task_kill_later(a);
+                       }
                }
 
-               /* FIXME: Reset device port (huh?) */
+               /* Reset device port */
+               if (!dev_phy) {
+                       ASD_DPRINTK("%s: No pending commands; can't reset.\n",
+                                   __FUNCTION__);
+                       goto out;
+               }
+               phy_reset_later(dev_phy, shost);
                goto out;
        }
        case SIGNAL_NCQ_ERROR:
index a2b479a659085a1a6fbc9cc294a890483affcc23..0fb347b4b1a221f308d612d2dcab256f77ce81eb 100644 (file)
@@ -144,7 +144,7 @@ static int sas_get_linkerrors(struct sas_phy *phy)
        return sas_smp_get_phy_events(phy);
 }
 
-static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+int sas_phy_reset(struct sas_phy *phy, int hard_reset)
 {
        int ret;
        enum phy_func reset_type;
index c5fd37522728911110fbbbf9c4cb276bdad341e2..e064aac06b90950b3e0e5e671a6840e49e0858b2 100644 (file)
@@ -865,3 +865,4 @@ EXPORT_SYMBOL_GPL(sas_change_queue_depth);
 EXPORT_SYMBOL_GPL(sas_change_queue_type);
 EXPORT_SYMBOL_GPL(sas_bios_param);
 EXPORT_SYMBOL_GPL(sas_task_abort);
+EXPORT_SYMBOL_GPL(sas_phy_reset);
index a1fc20a47c50dbfce00b3777de6a4633a860a64d..29f6e1af1bf945d24058da4d81c42dd84df206ad 100644 (file)
@@ -597,6 +597,7 @@ struct sas_domain_function_template {
 extern int sas_register_ha(struct sas_ha_struct *);
 extern int sas_unregister_ha(struct sas_ha_struct *);
 
+int sas_phy_reset(struct sas_phy *phy, int hard_reset);
 extern int sas_queuecommand(struct scsi_cmnd *,
                     void (*scsi_done)(struct scsi_cmnd *));
 extern int sas_target_alloc(struct scsi_target *);
index 53024377f3b8496e6c0cf3fe366903c4245feb44..59633a82de47cd54dc6fa2cb6fcf09b9a1e270d4 100644 (file)
@@ -73,6 +73,8 @@ struct sas_phy {
 
        /* for the list of phys belonging to a port */
        struct list_head        port_siblings;
+
+       struct work_struct      reset_work;
 };
 
 #define dev_to_phy(d) \