struct ahci_port_priv *pp;
void *mem;
dma_addr_t mem_dma;
- int rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->sg;
int dir = qc->dma_dir;
- void *pad_buf = NULL;
WARN_ON(sg == NULL);
- VPRINTK("unmapping %u sg elements\n", qc->mapped_n_elem);
+ VPRINTK("unmapping %u sg elements\n", qc->n_elem);
- /* if we padded the buffer out to 32-bit bound, and data
- * xfer direction is from-device, we must copy from the
- * pad buffer back into the supplied buffer
- */
- if (qc->pad_len && !(qc->tf.flags & ATA_TFLAG_WRITE))
- pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
-
- if (qc->mapped_n_elem)
- dma_unmap_sg(ap->dev, sg, qc->mapped_n_elem, dir);
- /* restore last sg */
- if (qc->last_sg)
- *qc->last_sg = qc->saved_last_sg;
- if (pad_buf) {
- struct scatterlist *psg = &qc->extra_sg[1];
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(addr + psg->offset, pad_buf, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
- }
+ if (qc->n_elem)
+ dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
qc->flags &= ~ATA_QCFLAG_DMAMAP;
qc->sg = NULL;
qc->cursg = qc->sg;
}
-static unsigned int ata_sg_setup_extra(struct ata_queued_cmd *qc,
- unsigned int *n_elem_extra,
- unsigned int *nbytes_extra)
-{
- struct ata_port *ap = qc->ap;
- unsigned int n_elem = qc->n_elem;
- struct scatterlist *lsg, *copy_lsg = NULL, *tsg = NULL, *esg = NULL;
-
- *n_elem_extra = 0;
- *nbytes_extra = 0;
-
- /* needs padding? */
- qc->pad_len = qc->nbytes & 3;
-
- if (likely(!qc->pad_len))
- return n_elem;
-
- /* locate last sg and save it */
- lsg = sg_last(qc->sg, n_elem);
- qc->last_sg = lsg;
- qc->saved_last_sg = *lsg;
-
- sg_init_table(qc->extra_sg, ARRAY_SIZE(qc->extra_sg));
-
- if (qc->pad_len) {
- struct scatterlist *psg = &qc->extra_sg[1];
- void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
- unsigned int offset;
-
- WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
-
- memset(pad_buf, 0, ATA_DMA_PAD_SZ);
-
- /* psg->page/offset are used to copy to-be-written
- * data in this function or read data in ata_sg_clean.
- */
- offset = lsg->offset + lsg->length - qc->pad_len;
- sg_set_page(psg, nth_page(sg_page(lsg), offset >> PAGE_SHIFT),
- qc->pad_len, offset_in_page(offset));
-
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- void *addr = kmap_atomic(sg_page(psg), KM_IRQ0);
- memcpy(pad_buf, addr + psg->offset, qc->pad_len);
- kunmap_atomic(addr, KM_IRQ0);
- }
-
- sg_dma_address(psg) = ap->pad_dma + (qc->tag * ATA_DMA_PAD_SZ);
- sg_dma_len(psg) = ATA_DMA_PAD_SZ;
-
- /* Trim the last sg entry and chain the original and
- * padding sg lists.
- *
- * Because chaining consumes one sg entry, one extra
- * sg entry is allocated and the last sg entry is
- * copied to it if the length isn't zero after padded
- * amount is removed.
- *
- * If the last sg entry is completely replaced by
- * padding sg entry, the first sg entry is skipped
- * while chaining.
- */
- lsg->length -= qc->pad_len;
- if (lsg->length) {
- copy_lsg = &qc->extra_sg[0];
- tsg = &qc->extra_sg[0];
- } else {
- n_elem--;
- tsg = &qc->extra_sg[1];
- }
-
- esg = &qc->extra_sg[1];
-
- (*n_elem_extra)++;
- (*nbytes_extra) += 4 - qc->pad_len;
- }
-
- if (copy_lsg)
- sg_set_page(copy_lsg, sg_page(lsg), lsg->length, lsg->offset);
-
- sg_chain(lsg, 1, tsg);
- sg_mark_end(esg);
-
- /* sglist can't start with chaining sg entry, fast forward */
- if (qc->sg == lsg) {
- qc->sg = tsg;
- qc->cursg = tsg;
- }
-
- return n_elem;
-}
-
/**
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
* @qc: Command with scatter-gather table to be mapped.
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- unsigned int n_elem, n_elem_extra, nbytes_extra;
+ unsigned int n_elem;
VPRINTK("ENTER, ata%u\n", ap->print_id);
- n_elem = ata_sg_setup_extra(qc, &n_elem_extra, &nbytes_extra);
+ n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
+ if (n_elem < 1)
+ return -1;
- if (n_elem) {
- n_elem = dma_map_sg(ap->dev, qc->sg, n_elem, qc->dma_dir);
- if (n_elem < 1) {
- /* restore last sg */
- if (qc->last_sg)
- *qc->last_sg = qc->saved_last_sg;
- return -1;
- }
- DPRINTK("%d sg elements mapped\n", n_elem);
- }
+ DPRINTK("%d sg elements mapped\n", n_elem);
- qc->n_elem = qc->mapped_n_elem = n_elem;
- qc->n_elem += n_elem_extra;
- qc->nbytes += nbytes_extra;
+ qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
return 0;
*/
BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
- /* ata_sg_setup() may update nbytes */
- qc->raw_nbytes = qc->nbytes;
-
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
(ap->flags & ATA_FLAG_PIO_DMA)))
if (ata_sg_setup(qc))
int ata_port_start(struct ata_port *ap)
{
struct device *dev = ap->dev;
- int rc;
ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
GFP_KERNEL);
if (!ap->prd)
return -ENOMEM;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
- DPRINTK("prd alloc, virt %p, dma %llx\n", ap->prd,
- (unsigned long long)ap->prd_dma);
return 0;
}
/* configure max sectors */
blk_queue_max_sectors(sdev->request_queue, dev->max_sectors);
- /* SATA DMA transfers must be multiples of 4 byte, so
- * we need to pad ATAPI transfers using an extra sg.
- * Decrement max hw segments accordingly.
- */
- if (dev->class == ATA_DEV_ATAPI) {
- struct request_queue *q = sdev->request_queue;
- blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
-
+ if (dev->class == ATA_DEV_ATAPI)
/* set the min alignment */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
- } else
+ else {
/* ATA devices must be sector aligned */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_SECT_SIZE - 1);
-
- if (dev->class == ATA_DEV_ATA)
sdev->manage_start_stop = 1;
+ }
if (dev->flags & ATA_DFLAG_AN)
set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(qc->nbytes, (unsigned int)63 * 1024);
+ nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
* @ap: Port to initialize
*
* Called just after data structures for each port are
- * initialized. Allocates DMA pad.
+ * initialized.
*
* May be used as the port_start() entry in ata_port_operations.
*
*/
int ata_sas_port_start(struct ata_port *ap)
{
- return ata_pad_alloc(ap, ap->dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(ata_sas_port_start);
* ata_port_stop - Undo ata_sas_port_start()
* @ap: Port to shut down
*
- * Frees the DMA pad.
- *
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
void ata_sas_port_stop(struct ata_port *ap)
{
- ata_pad_free(ap, ap->dev);
}
EXPORT_SYMBOL_GPL(ata_sas_port_stop);
}
-static int pata_icside_port_start(struct ata_port *ap)
-{
- /* No PRD to alloc */
- return ata_pad_alloc(ap, ap->dev);
-}
-
static struct scsi_host_template pata_icside_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.irq_clear = ata_dummy_noret,
.irq_on = ata_irq_on,
- .port_start = pata_icside_port_start,
-
.bmdma_stop = pata_icside_bmdma_stop,
.bmdma_status = pata_icside_bmdma_status,
};
if (!pp)
return -ENOMEM;
- /*
- * allocate per command dma alignment pad buffer, which is used
- * internally by libATA to ensure that all transfers ending on
- * unaligned boundaries are padded, to align on Dword boundaries
- */
- retval = ata_pad_alloc(ap, dev);
- if (retval) {
- kfree(pp);
- return retval;
- }
-
mem = dma_alloc_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem) {
- ata_pad_free(ap, dev);
kfree(pp);
return -ENOMEM;
}
dma_free_coherent(dev, SATA_FSL_PORT_PRIV_DMA_SZ,
pp->cmdslot, pp->cmdslot_paddr);
- ata_pad_free(ap, dev);
kfree(pp);
}
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
unsigned long flags;
- int tag, rc;
+ int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
ap->private_data = pp;
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
pp->crqb = dma_pool_alloc(hpriv->crqb_pool, GFP_KERNEL, &pp->crqb_dma);
if (!pp->crqb)
return -ENOMEM;
union sil24_cmd_block *cb;
size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
dma_addr_t cb_dma;
- int rc;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
memset(cb, 0, cb_size);
- rc = ata_pad_alloc(ap, dev);
- if (rc)
- return rc;
-
pp->cmd_block = cb;
pp->cmd_block_dma = cb_dma;
struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb;
struct ipr_ioadl_desc *ioadl = ipr_cmd->ioadl;
struct ipr_ioadl_desc *last_ioadl = NULL;
- int len = qc->nbytes + qc->pad_len;
+ int len = qc->nbytes;
struct scatterlist *sg;
unsigned int si;
ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC;
ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK;
- ipr_cmd->dma_use_sg = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+ ipr_cmd->dma_use_sg = qc->n_elem;
ipr_build_ata_ioadl(ipr_cmd, qc);
regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION;
task->uldd_task = qc;
if (ata_is_atapi(qc->tf.protocol)) {
memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
- task->total_xfer_len = qc->nbytes + qc->pad_len;
- task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+ task->total_xfer_len = qc->nbytes;
+ task->num_scatter = qc->n_elem;
} else {
for_each_sg(qc->sg, sg, qc->n_elem, si)
xfer += sg->length;
/* size of buffer to pad xfers ending on unaligned boundaries */
ATA_DMA_PAD_SZ = 4,
- ATA_DMA_PAD_BUF_SZ = ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,
/* ering size */
ATA_ERING_SIZE = 32,
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
- unsigned int mapped_n_elem;
int dma_dir;
- unsigned int pad_len;
unsigned int sect_size;
unsigned int nbytes;
- unsigned int raw_nbytes;
unsigned int curbytes;
struct scatterlist *cursg;
unsigned int cursg_ofs;
- struct scatterlist *last_sg;
- struct scatterlist saved_last_sg;
struct scatterlist sgent;
- struct scatterlist extra_sg[2];
struct scatterlist *sg;
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
- void *pad; /* array of DMA pad buffers */
- dma_addr_t pad_dma;
-
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
u8 ctl; /* cache of ATA control register */
qc->flags = 0;
qc->cursg = NULL;
qc->cursg_ofs = 0;
- qc->nbytes = qc->raw_nbytes = qc->curbytes = 0;
+ qc->nbytes = qc->curbytes = 0;
qc->n_elem = 0;
- qc->mapped_n_elem = 0;
qc->err_mask = 0;
- qc->pad_len = 0;
- qc->last_sg = NULL;
qc->sect_size = ATA_SECT_SIZE;
ata_tf_init(qc->dev, &qc->tf);
return mask;
}
-static inline int ata_pad_alloc(struct ata_port *ap, struct device *dev)
-{
- ap->pad_dma = 0;
- ap->pad = dmam_alloc_coherent(dev, ATA_DMA_PAD_BUF_SZ,
- &ap->pad_dma, GFP_KERNEL);
- return (ap->pad == NULL) ? -ENOMEM : 0;
-}
-
-static inline void ata_pad_free(struct ata_port *ap, struct device *dev)
-{
- dmam_free_coherent(dev, ATA_DMA_PAD_BUF_SZ, ap->pad, ap->pad_dma);
-}
-
static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
{
return *(struct ata_port **)&host->hostdata[0];
projects / linux-2.6-omap-h63xx.git / commitdiff