cpm2: Rework baud rate generators configuration to support external clocks.

The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support
external clocks. This patch adds a new exported __cpm2_setbrg function
that takes the clock rate and clock source as extra parameters, and moves
cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they
become inline wrappers around __cpm2_setbrg.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 9311778a5082ba56d262aff8c449a8af5f4f81ae..f1c3395633b9aedebda4c1979e6801f659c9fa40 100644 (file)
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK    (get_brgfreq())
-#define BRG_UART_CLK   (BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
        u32 __iomem *bp;
+       u32 val;
 
        /* This is good enough to get SMCs running.....
        */
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
                brg -= 4;
        }
        bp += brg;
-       out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-       cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-       u32 __iomem *bp;
-       u32 val;
-
-       if (brg < 4) {
-               bp = cpm2_map_size(im_brgc1, 16);
-       } else {
-               bp = cpm2_map_size(im_brgc5, 16);
-               brg -= 4;
-       }
-       bp += brg;
-       val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+       val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
        if (div16)
                val |= CPM_BRG_DIV16;
 
        out_be32(bp, val);
        cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {

diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 2c7fd9cee291509569cde5c9a9d3bd1e83a6f663..2a6fa0183ac9dd67f554aac4a17e6c15598d12a9 100644 (file)
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -12,6 +12,7 @@
 
 #include <asm/immap_cpm2.h>
 #include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
 
 #ifdef CONFIG_PPC_85xx
 #define CPM_MAP_ADDR (get_immrbase() + 0x80000)
@@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
 #define cpm_dpfree cpm_muram_free
 #define cpm_dpram_addr cpm_muram_addr
 
-extern void cpm_setbrg(uint brg, uint rate);
-extern void cpm2_fastbrg(uint brg, uint rate, int div16);
 extern void cpm2_reset(void);
 
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST            ((uint)0x00020000)
+#define CPM_BRG_EN             ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT       ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9    ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15   ((uint)0x00008000)
+#define CPM_BRG_ATB            ((uint)0x00002000)
+#define CPM_BRG_CD_MASK                ((uint)0x00001ffe)
+#define CPM_BRG_DIV16          ((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK       (get_brgfreq())
+#define CPM2_BRG_UART_CLK      (CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+       __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+       __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
 /* Function code bits, usually generic to devices.
 */
 #define CPMFCR_GBL     ((u_char)0x20)  /* Set memory snooping */
@@ -195,17 +226,6 @@ typedef struct smc_uart {
 #define SMCM_TX                ((unsigned char)0x02)
 #define SMCM_RX                ((unsigned char)0x01)
 
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST            ((uint)0x00020000)
-#define CPM_BRG_EN             ((uint)0x00010000)
-#define CPM_BRG_EXTC_INT       ((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK3_9    ((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK5_15   ((uint)0x00008000)
-#define CPM_BRG_ATB            ((uint)0x00002000)
-#define CPM_BRG_CD_MASK                ((uint)0x00001ffe)
-#define CPM_BRG_DIV16          ((uint)0x00000001)
-
 /* SCCs.
 */
 #define SCC_GSMRH_IRP          ((uint)0x00040000)