sata_mv errata workaround for sata25 part 1

Part 1 of workaround for errata "sata#25" for the 60x1 series
(the second half of this errata workaround is still in development.

Bit22 of the GPIO port has to be set "on" when in NCQ mode.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 0545a49161006ad290fdc1bc778951bb1f98974b..fbccf215d501785866f4540e0c316c5447d9293e 100644 (file)
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1151,6 +1151,21 @@ static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
                writelfl(new_ltmode, port_mmio + LTMODE_OFS);
 }
 
+static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
+{
+       struct mv_host_priv *hpriv = ap->host->private_data;
+       u32 old, new;
+
+       /* workaround for 88SX60x1 FEr SATA#25 (part 1) */
+       old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
+       if (want_ncq)
+               new = old | (1 << 22);
+       else
+               new = old & ~(1 << 22);
+       if (new != old)
+               writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
+}
+
 static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 {
        u32 cfg;
@@ -1164,10 +1179,11 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
        if (IS_GEN_I(hpriv))
                cfg |= (1 << 8);        /* enab config burst size mask */
 
-       else if (IS_GEN_II(hpriv))
+       else if (IS_GEN_II(hpriv)) {
                cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+               mv_60x1_errata_sata25(ap, want_ncq);
 
-       else if (IS_GEN_IIE(hpriv)) {
+       } else if (IS_GEN_IIE(hpriv)) {
                cfg |= (1 << 23);       /* do not mask PM field in rx'd FIS */
                cfg |= (1 << 22);       /* enab 4-entry host queue cache */
                if (HAS_PCI(ap->host))