]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support
authorImre Kaloz <kaloz@openwrt.org>
Sat, 2 Jun 2007 14:47:51 +0000 (15:47 +0100)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Thu, 12 Jul 2007 10:12:15 +0000 (11:12 +0100)
This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series.

This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
arch/arm/mach-ixp4xx/Kconfig
arch/arm/mach-ixp4xx/Makefile
arch/arm/mach-ixp4xx/wg302v2-pci.c [new file with mode: 0644]
arch/arm/mach-ixp4xx/wg302v2-setup.c [new file with mode: 0644]
include/asm-arm/arch-ixp4xx/uncompress.h

index daaa190c12533b516a1a221e4717fc4ec87da23f..61b2dfcb89d623dd401cd8226ec2d66bbf939690 100644 (file)
@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
          7001 Access Point. For more information on this platform,
          see http://openwrt.org
 
+config MACH_WG302V2
+       bool "Netgear WG302 v2 / WAG302 v2"
+       select PCI
+       help
+         Say 'Y' here if you want your kernel to support Netgear's
+         WG302 v2 or WAG302 v2 Access Points. For more information
+         on this platform, see http://openwrt.org
+
 config ARCH_IXDP425
        bool "IXDP425"
        help
index b79ce249866a07ffbc3f9de7de03702273ecfd6d..77e00ade558589297aaa425558958a66a61fbffb 100644 (file)
@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)          += nslu2-pci.o
 obj-pci-$(CONFIG_MACH_NAS100D)         += nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)         += dsmg600-pci.o
 obj-pci-$(CONFIG_MACH_GATEWAY7001)     += gateway7001-pci.o
+obj-pci-$(CONFIG_MACH_WG302V2)         += wg302v2-pci.o
 
 obj-y  += common.o
 
@@ -26,5 +27,6 @@ obj-$(CONFIG_MACH_NSLU2)      += nslu2-setup.o nslu2-power.o
 obj-$(CONFIG_MACH_NAS100D)     += nas100d-setup.o nas100d-power.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o dsmg600-power.o
 obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
+obj-$(CONFIG_MACH_WG302V2)     += wg302v2-setup.o
 
 obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
new file mode 100644 (file)
index 0000000..7c0e3aa
--- /dev/null
@@ -0,0 +1,64 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v2-pci.c
+ *
+ * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * based on coyote-pci.c:
+ *     Copyright (C) 2002 Jungo Software Technologies.
+ *     Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/pci.h>
+
+void __init wg302v2_pci_preinit(void)
+{
+       set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
+       set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+
+       ixp4xx_pci_preinit();
+}
+
+static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+       if (slot == 1)
+               return IRQ_IXP4XX_GPIO8;
+       else if (slot == 2)
+               return IRQ_IXP4XX_GPIO9;
+       else return -1;
+}
+
+struct hw_pci wg302v2_pci __initdata = {
+       .nr_controllers = 1,
+       .preinit =        wg302v2_pci_preinit,
+       .swizzle =        pci_std_swizzle,
+       .setup =          ixp4xx_setup,
+       .scan =           ixp4xx_scan_bus,
+       .map_irq =        wg302v2_map_irq,
+};
+
+int __init wg302v2_pci_init(void)
+{
+       if (machine_is_wg302v2())
+               pci_common_init(&wg302v2_pci);
+       return 0;
+}
+
+subsys_initcall(wg302v2_pci_init);
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
new file mode 100644 (file)
index 0000000..f7e09ad
--- /dev/null
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302-setup.c
+ *
+ * Board setup for the Netgear WG302 v2 and WAG302 v2
+ *
+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * based on coyote-setup.c:
+ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Imre Kaloz <kaloz@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data wg302v2_flash_data = {
+       .map_name       = "cfi_probe",
+       .width          = 2,
+};
+
+static struct resource wg302v2_flash_resource = {
+       .flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device wg302v2_flash = {
+       .name           = "IXP4XX-Flash",
+       .id             = 0,
+       .dev            = {
+               .platform_data = &wg302v2_flash_data,
+       },
+       .num_resources  = 1,
+       .resource       = &wg302v2_flash_resource,
+};
+
+static struct resource wg302v2_uart_resource = {
+       .start  = IXP4XX_UART2_BASE_PHYS,
+       .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+       .flags  = IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port wg302v2_uart_data[] = {
+       {
+               .mapbase        = IXP4XX_UART2_BASE_PHYS,
+               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+               .irq            = IRQ_IXP4XX_UART2,
+               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+               .iotype         = UPIO_MEM,
+               .regshift       = 2,
+               .uartclk        = IXP4XX_UART_XTAL,
+       },
+       { },
+};
+
+static struct platform_device wg302v2_uart = {
+       .name           = "serial8250",
+       .id             = PLAT8250_DEV_PLATFORM,
+       .dev                    = {
+               .platform_data  = wg302v2_uart_data,
+       },
+       .num_resources  = 1,
+       .resource       = &wg302v2_uart_resource,
+};
+
+static struct platform_device *wg302v2_devices[] __initdata = {
+       &wg302v2_flash,
+       &wg302v2_uart,
+};
+
+static void __init wg302v2_init(void)
+{
+       ixp4xx_sys_init();
+
+       wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+       wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+       platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
+}
+
+#ifdef CONFIG_MACH_WG302V2
+MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
+       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
+       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+       .map_io         = ixp4xx_map_io,
+       .init_irq       = ixp4xx_init_irq,
+       .timer          = &ixp4xx_timer,
+       .boot_params    = 0x0100,
+       .init_machine   = wg302v2_init,
+MACHINE_END
+#endif
index bf7a7882bf7c0544bef1838e6f5074de421948a3..f7a35b78823ff0227c44c6e4d9cc4d6052408ddd 100644 (file)
@@ -41,7 +41,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
         * Some boards are using UART2 as console
         */
        if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-                        machine_is_gateway7001())
+                        machine_is_gateway7001() || machine_is_wg302v2())
                uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
        else
                uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;