powerpc/83xx: Fix MCU support merge issue in mpc8349emitx.dts

Just found the merge issue in 442746989d92afc125040e0f29b33602ad94da99
("powerpc/83xx: Add support for MCU microcontroller in .dts files"):
the commit adds the MCU controller node into the DMA node, which is
wrong because the MCU sits on the I2C bus. Fix this by moving the MCU
node into the I2C controller node.

The original patch[1] was OK though. ;-)

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 2c9d54a35bc312e8286812a67507e7a71e9f9141..4bdbaf4993a185c176000890f1c999108f6b2f11 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -91,6 +91,14 @@
                                interrupts = <18 0x8>;
                                interrupt-parent = <&ipic>;
                        };
+
+                       mcu_pio: mcu@a {
+                               #gpio-cells = <2>;
+                               compatible = "fsl,mc9s08qg8-mpc8349emitx",
+                                            "fsl,mcu-mpc8349emitx";
+                               reg = <0x0a>;
+                               gpio-controller;
+                       };
                };
 
                spi@7000 {
@@ -139,14 +147,6 @@
                                interrupt-parent = <&ipic>;
                                interrupts = <71 8>;
                        };
-
-                       mcu_pio: mcu@a {
-                               #gpio-cells = <2>;
-                               compatible = "fsl,mc9s08qg8-mpc8349emitx",
-                                            "fsl,mcu-mpc8349emitx";
-                               reg = <0x0a>;
-                               gpio-controller;
-                       };
                };
 
                usb@22000 {