*
* --> Complete a full errata audit for all chipsets to identify others.
*
- * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
- *
* --> Develop a low-power-consumption strategy, and implement it.
*
* --> [Experiment, low priority] Investigate interrupt coalescing.
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.25"
+#define DRV_VERSION "1.26"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE |
ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI,
+ ATA_FLAG_NCQ,
MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN,
EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */
+
+ BMDMA_CMD_OFS = 0x224, /* bmdma command register */
+ BMDMA_STATUS_OFS = 0x228, /* bmdma status register */
+ BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */
+ BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */
+
/* Host private flags (hp_flags) */
MV_HP_FLAG_MSI = (1 << 0),
MV_HP_ERRATA_50XXB0 = (1 << 1),
static void mv_process_crpb_entries(struct ata_port *ap,
struct mv_port_priv *pp);
+static unsigned long mv_mode_filter(struct ata_device *dev,
+ unsigned long xfer_mask);
+static void mv_sff_irq_clear(struct ata_port *ap);
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc);
+static void mv_bmdma_setup(struct ata_queued_cmd *qc);
+static void mv_bmdma_start(struct ata_queued_cmd *qc);
+static void mv_bmdma_stop(struct ata_queued_cmd *qc);
+static u8 mv_bmdma_status(struct ata_port *ap);
+
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
* PRDs for 64K boundaries in mv_fill_sg().
.pmp_softreset = mv_softreset,
.softreset = mv_softreset,
.error_handler = mv_pmp_error_handler,
+
+ .sff_irq_clear = mv_sff_irq_clear,
+ .check_atapi_dma = mv_check_atapi_dma,
+ .bmdma_setup = mv_bmdma_setup,
+ .bmdma_start = mv_bmdma_start,
+ .bmdma_stop = mv_bmdma_stop,
+ .bmdma_status = mv_bmdma_status,
+ .mode_filter = mv_mode_filter,
};
static struct ata_port_operations mv_iie_ops = {
*cmdw = cpu_to_le16(tmp);
}
+/**
+ * mv_mode_filter - Allow ATAPI DMA only on GenII chips.
+ * @dev: device whose xfer modes are being configured.
+ *
+ * Only the GenII hardware can use DMA with ATAPI drives.
+ */
+static unsigned long mv_mode_filter(struct ata_device *adev,
+ unsigned long xfer_mask)
+{
+ if (adev->class == ATA_DEV_ATAPI) {
+ struct mv_host_priv *hpriv = adev->link->ap->host->private_data;
+ if (!IS_GEN_II(hpriv)) {
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ ata_dev_printk(adev, KERN_INFO,
+ "ATAPI DMA not supported on this chipset\n");
+ }
+ }
+ return xfer_mask;
+}
+
+/**
+ * mv_sff_irq_clear - Clear hardware interrupt after DMA.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * We need this only for ATAPI bmdma transactions,
+ * as otherwise we experience spurious interrupts
+ * after libata-sff handles the bmdma interrupts.
+ */
+static void mv_sff_irq_clear(struct ata_port *ap)
+{
+ mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ);
+}
+
+/**
+ * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA.
+ * @qc: queued command to check for chipset/DMA compatibility.
+ *
+ * The bmdma engines cannot handle speculative data sizes
+ * (bytecount under/over flow). So only allow DMA for
+ * data transfer commands with known data sizes.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ if (scmd) {
+ switch (scmd->cmnd[0]) {
+ case READ_6:
+ case READ_10:
+ case READ_12:
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_12:
+ case GPCMD_READ_CD:
+ case GPCMD_SEND_DVD_STRUCTURE:
+ case GPCMD_SEND_CUE_SHEET:
+ return 0; /* DMA is safe */
+ }
+ }
+ return -EOPNOTSUPP; /* use PIO instead */
+}
+
+/**
+ * mv_bmdma_setup - Set up BMDMA transaction
+ * @qc: queued command to prepare DMA for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+
+ mv_fill_sg(qc);
+
+ /* clear all DMA cmd bits */
+ writel(0, port_mmio + BMDMA_CMD_OFS);
+
+ /* load PRD table addr. */
+ writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16,
+ port_mmio + BMDMA_PRD_HIGH_OFS);
+ writelfl(pp->sg_tbl_dma[qc->tag],
+ port_mmio + BMDMA_PRD_LOW_OFS);
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+/**
+ * mv_bmdma_start - Start a BMDMA transaction
+ * @qc: queued command to start DMA on.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START;
+
+ /* start host DMA transaction */
+ writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+}
+
+/**
+ * mv_bmdma_stop - Stop BMDMA transfer
+ * @qc: queued command to stop DMA on.
+ *
+ * Clears the ATA_DMA_START flag in the bmdma control register
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 cmd;
+
+ /* clear start/stop bit */
+ cmd = readl(port_mmio + BMDMA_CMD_OFS);
+ cmd &= ~ATA_DMA_START;
+ writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_sff_dma_pause(ap);
+}
+
+/**
+ * mv_bmdma_status - Read BMDMA status
+ * @ap: port for which to retrieve DMA status.
+ *
+ * Read and return equivalent of the sff BMDMA status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 mv_bmdma_status(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg, status;
+
+ /*
+ * Other bits are valid only if ATA_DMA_ACTIVE==0,
+ * and the ATA_DMA_INTR bit doesn't exist.
+ */
+ reg = readl(port_mmio + BMDMA_STATUS_OFS);
+ if (reg & ATA_DMA_ACTIVE)
+ status = ATA_DMA_ACTIVE;
+ else
+ status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
+ return status;
+}
+
/**
* mv_qc_prep - Host specific command preparation.
* @qc: queued command to prepare
projects / linux-2.6-omap-h63xx.git / commitdiff