]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
x86, VisWS: turn into generic arch, eliminate include/asm-x86/mach-visws/mach_apic.h
authorIngo Molnar <mingo@elte.hu>
Thu, 10 Jul 2008 13:04:13 +0000 (15:04 +0200)
committerIngo Molnar <mingo@elte.hu>
Thu, 10 Jul 2008 16:55:34 +0000 (18:55 +0200)
now that include/asm-x86/mach-visws/mach_apic.h equals
to include/asm-x86/mach-default/mach_apic.h, simply start
using the generic one.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
include/asm-x86/mach-visws/mach_apic.h

index 0b2cde5e1b74b38641c4cea560784be0d7716a9b..6943e7a1d0e6c01dac8374b09e1b55eaef31b9b0 100644 (file)
@@ -1,141 +1 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-#include <mach_apicdef.h>
-#include <asm/smp.h>
-
-#define APIC_DFR_VALUE (APIC_DFR_FLAT)
-
-static inline cpumask_t target_cpus(void)
-{ 
-#ifdef CONFIG_SMP
-       return cpu_online_map;
-#else
-       return cpumask_of_cpu(0);
-#endif
-} 
-
-#define NO_BALANCE_IRQ (0)
-#define esr_disable (0)
-
-#ifdef CONFIG_X86_64
-#include <asm/genapic.h>
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#define TARGET_CPUS      (genapic->target_cpus())
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define phys_pkg_id    (genapic->phys_pkg_id)
-#define vector_allocation_domain    (genapic->vector_allocation_domain)
-extern void setup_apic_routing(void);
-#else
-#define INT_DELIVERY_MODE dest_LowestPrio
-#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
-#define TARGET_CPUS (target_cpus())
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void init_apic_ldr(void)
-{
-       unsigned long val;
-
-       apic_write_around(APIC_DFR, APIC_DFR_VALUE);
-       val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-       val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
-       apic_write_around(APIC_LDR, val);
-}
-
-static inline int apic_id_registered(void)
-{
-       return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
-       return cpus_addr(cpumask)[0];
-}
-
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
-       return cpuid_apic >> index_msb;
-}
-
-static inline void setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-       printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-                                       "Flat", nr_ioapics);
-#endif
-}
-
-static inline int apicid_to_node(int logical_apicid)
-{
-#ifdef CONFIG_SMP
-       return apicid_2_node[hard_smp_processor_id()];
-#else
-       return 0;
-#endif
-}
-#endif
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-       return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
-       return physid_isset(bit, phys_cpu_present_map);
-}
-
-static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
-{
-       return phys_map;
-}
-
-static inline int multi_timer_check(int apic, int irq)
-{
-       return 0;
-}
-
-/* Mapping from cpu number to logical apicid */
-static inline int cpu_to_logical_apicid(int cpu)
-{
-       return 1 << cpu;
-}
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
-       if (mps_cpu < NR_CPUS && cpu_present(mps_cpu))
-               return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
-       else
-               return BAD_APICID;
-}
-
-static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
-{
-       return physid_mask_of_physid(phys_apicid);
-}
-
-static inline void setup_portio_remap(void)
-{
-}
-
-static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-       return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
-}
-
-static inline void enable_apic_mode(void)
-{
-}
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* __ASM_MACH_APIC_H */
+#include "../mach-default/mach_apic.h"