acenic: convert to net_device_ops

Convert this driver to network device ops. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 109eb7ccff307a28a2c10d62833c9c6fa87c7a76..309a90ea92115d2fdb90b79af0a1715d5346b290 100644 (file)
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -450,6 +450,17 @@ static const struct ethtool_ops ace_ethtool_ops = {
 
 static void ace_watchdog(struct net_device *dev);
 
+static const struct net_device_ops ace_netdev_ops = {
+       .ndo_open               = ace_open,
+       .ndo_stop               = ace_close,
+       .ndo_tx_timeout         = ace_watchdog,
+       .ndo_get_stats          = ace_get_stats,
+       .ndo_set_multicast_list = ace_set_multicast_list,
+       .ndo_set_mac_address    = ace_set_mac_addr,
+       .ndo_change_mtu         = ace_change_mtu,
+       .ndo_vlan_rx_register   = ace_vlan_rx_register,
+};
+
 static int __devinit acenic_probe_one(struct pci_dev *pdev,
                const struct pci_device_id *id)
 {
@@ -473,20 +484,13 @@ static int __devinit acenic_probe_one(struct pci_dev *pdev,
        dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
 #if ACENIC_DO_VLAN
        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-       dev->vlan_rx_register = ace_vlan_rx_register;
 #endif
 
-       dev->tx_timeout = &ace_watchdog;
        dev->watchdog_timeo = 5*HZ;
 
-       dev->open = &ace_open;
-       dev->stop = &ace_close;
+       dev->netdev_ops = &ace_netdev_ops;
        dev->hard_start_xmit = &ace_start_xmit;
-       dev->get_stats = &ace_get_stats;
-       dev->set_multicast_list = &ace_set_multicast_list;
        SET_ETHTOOL_OPS(dev, &ace_ethtool_ops);
-       dev->set_mac_address = &ace_set_mac_addr;
-       dev->change_mtu = &ace_change_mtu;
 
        /* we only display this string ONCE */
        if (!boards_found)