]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
[POWERPC] Introduce lowmem_end_addr to distinguish from total_lowmem
authorKumar Gala <galak@kernel.crashing.org>
Tue, 15 Apr 2008 19:52:22 +0000 (05:52 +1000)
committerPaul Mackerras <paulus@samba.org>
Wed, 16 Apr 2008 21:46:13 +0000 (07:46 +1000)
total_lowmem represents the amount of low memory, not the physical
address that low memory ends at.  If the start of memory is at 0 it
happens that total_lowmem can be used as both the size and the address
that lowmem ends at (or more specifically one byte beyond the end).

To make the code a bit more clear and deal with the case when the start of
memory isn't at physical 0, we introduce lowmem_end_addr that represents
one byte beyond the last physical address in the lowmem region.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/mm/44x_mmu.c
arch/powerpc/mm/init_32.c
arch/powerpc/mm/init_64.c
arch/powerpc/mm/mem.c
arch/powerpc/mm/mmu_decl.h

index 04dc08798d3d1ff9c4bdbc2da09f9fbc8ce49c02..953fb919eb06da65f004f18943490028cd93538a 100644 (file)
@@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void)
 
        /* Pin in enough TLBs to cover any lowmem not covered by the
         * initial 256M mapping established in head_44x.S */
-       for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+       for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
             addr += PPC_PIN_SIZE)
                ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
 
index 1d7e5b8ade6a837c8c519ec663deee4366dd65ee..ba61d088d2a26f8b05e067851b8c1f8bc983a9dc 100644 (file)
@@ -146,6 +146,7 @@ void __init MMU_init(void)
        }
 
        total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+       lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
        /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
@@ -156,9 +157,10 @@ void __init MMU_init(void)
 
        if (total_lowmem > __max_low_memory) {
                total_lowmem = __max_low_memory;
+               lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
                total_memory = total_lowmem;
-               lmb_enforce_memory_limit(total_lowmem);
+               lmb_enforce_memory_limit(lowmem_end_addr);
                lmb_analyze();
 #endif /* CONFIG_HIGHMEM */
        }
index 5f553991698b2df5eb1c433c53f94a28c91f7055..9ea65d978685ea614782f0816e17d387bc317c33 100644 (file)
@@ -75,6 +75,8 @@
 /* max amount of RAM to use */
 unsigned long __max_memory;
 
+phys_addr_t memstart_addr;
+
 void free_initmem(void)
 {
        unsigned long addr;
index e3349ead395988e9ec8fa83f0a3cde5ff019c7fe..16def4dcff6d33ccadcf2b2b53c65628519fa901 100644 (file)
@@ -216,9 +216,11 @@ void __init do_init_bootmem(void)
        unsigned long total_pages;
        int boot_mapsize;
 
-       max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+       max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+       total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
        total_pages = total_lowmem >> PAGE_SHIFT;
+       max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
 #endif
 
        /*
@@ -244,18 +246,18 @@ void __init do_init_bootmem(void)
         * present.
         */
 #ifdef CONFIG_HIGHMEM
-       free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+       free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
        /* reserve the sections we're already using */
        for (i = 0; i < lmb.reserved.cnt; i++) {
                unsigned long addr = lmb.reserved.region[i].base +
                                     lmb_size_bytes(&lmb.reserved, i) - 1;
-               if (addr < total_lowmem)
+               if (addr < lowmem_end_addr)
                        reserve_bootmem(lmb.reserved.region[i].base,
                                        lmb_size_bytes(&lmb.reserved, i),
                                        BOOTMEM_DEFAULT);
-               else if (lmb.reserved.region[i].base < total_lowmem) {
-                       unsigned long adjusted_size = total_lowmem -
+               else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+                       unsigned long adjusted_size = lowmem_end_addr -
                                      lmb.reserved.region[i].base;
                        reserve_bootmem(lmb.reserved.region[i].base,
                                        adjusted_size, BOOTMEM_DEFAULT);
@@ -325,7 +327,7 @@ void __init paging_init(void)
               (top_of_ram - total_ram) >> 20);
        memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 #ifdef CONFIG_HIGHMEM
-       max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+       max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
        max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
 #else
        max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
@@ -380,7 +382,7 @@ void __init mem_init(void)
        {
                unsigned long pfn, highmem_mapnr;
 
-               highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+               highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
                for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
                        struct page *page = pfn_to_page(pfn);
                        if (lmb_is_reserved(pfn << PAGE_SHIFT))
index 5bc11f5933a91467834aecf40e5dc8ce60f8635f..67477e7729582b18391afd7fe70704b96c02cd4d 100644 (file)
@@ -52,6 +52,7 @@ extern unsigned long __initial_memory_limit;
 extern unsigned long total_memory;
 extern unsigned long total_lowmem;
 extern phys_addr_t memstart_addr;
+extern phys_addr_t lowmem_end_addr;
 
 /* ...and now those things that may be slightly different between processor
  * architectures.  -- Dan