]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
sky2: FE+ vlan workaround
authorStephen Hemminger <shemminger@linux-foundation.org>
Thu, 27 Sep 2007 19:32:44 +0000 (12:32 -0700)
committerJeff Garzik <jeff@garzik.org>
Fri, 28 Sep 2007 03:32:28 +0000 (23:32 -0400)
The FE+ workaround means the driver can no longer trust the status register
to indicate VLAN tagged frames.  The fix for this is to just disable VLAN
acceleration for that chip version. Tested and works fine.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/sky2.c

index a3de0b6127ebb537b87a1849e207909fcc333ee4..3bfc9d3e3c6e2e0619a33a65298056652fceb1c1 100644 (file)
@@ -3970,8 +3970,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
                dev->features |= NETIF_F_HIGHDMA;
 
 #ifdef SKY2_VLAN_TAG_USED
-       dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-       dev->vlan_rx_register = sky2_vlan_rx_register;
+       /* The workaround for FE+ status conflicts with VLAN tag detection. */
+       if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
+             sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) {
+               dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+               dev->vlan_rx_register = sky2_vlan_rx_register;
+       }
 #endif
 
        /* read the mac address */