If you do not specifically know you have a Voyager based machine,
say N here, otherwise the kernel you build will not be bootable.
-config X86_NUMAQ
- bool "NUMAQ (IBM/Sequent)"
- depends on SMP && X86_32
- select NUMA
- help
- This option is used for getting Linux to run on a (IBM/Sequent) NUMA
- multiquad box. This changes the way that processors are bootstrapped,
- and uses Clustered Logical APIC addressing mode instead of Flat Logical.
- You will need a new lynxer.elf file to flash your firmware with - send
- email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
- bool "Summit/EXA (IBM x440)"
- depends on X86_32 && SMP
- help
- This option is needed for IBM systems that use the Summit/EXA chipset.
- In particular, it is needed for the x440.
-
- If you don't have one of these computers, you should say N here.
- If you want to build a NUMA kernel, you must select ACPI.
-
-config X86_BIGSMP
- bool "Support for other sub-arch SMP systems with more than 8 CPUs"
- depends on X86_32 && SMP
- help
- This option is needed for the systems that have more than 8 CPUs
- and if the system is not of any sub-arch type above.
-
- If you don't have such a system, you should say N here.
-
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
depends on X86_32
and vice versa. See <file:Documentation/sgi-visws.txt> for details.
config X86_GENERICARCH
- bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+ bool "Generic architecture"
depends on X86_32
help
- This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
- It is intended for a generic binary kernel.
- If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
+ This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+ subarchitectures. It is intended for a generic binary kernel.
+ if you select them all, kernel will probe it one by one. and will
+ fallback to default.
+
+if X86_GENERICARCH
+
+config X86_NUMAQ
+ bool "NUMAQ (IBM/Sequent)"
+ depends on SMP && X86_32
+ select NUMA
+ help
+ This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+ NUMA multiquad box. This changes the way that processors are
+ bootstrapped, and uses Clustered Logical APIC addressing mode instead
+ of Flat Logical. You will need a new lynxer.elf file to flash your
+ firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+ bool "Summit/EXA (IBM x440)"
+ depends on X86_32 && SMP
+ help
+ This option is needed for IBM systems that use the Summit/EXA chipset.
+ In particular, it is needed for the x440.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
help
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
supposed to run on an IA32-based Unisys ES7000 system.
- Only choose this option if you have such a system, otherwise you
- should say N here.
+
+config X86_BIGSMP
+ bool "Support for big SMP systems with more than 8 CPUs"
+ depends on X86_32 && SMP
+ help
+ This option is needed for the systems that have more than 8 CPUs
+ and if the system is not of any sub-arch type above.
+
+endif
config X86_RDC321X
bool "RDC R-321x SoC"
config NUMA
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
depends on SMP
- depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+ depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL)
default n if X86_PC
- default y if (X86_NUMAQ || X86_SUMMIT)
+ default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH)
help
Enable NUMA (Non Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws
mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/
-
# generic subarchitecture
mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/
mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000
-fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/
-mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/
-
# RDC R-321x subarch support
mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x
mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/
static int vidport;
static int lines, cols;
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
#include "../../../../lib/inflate.c"
static void *malloc(int size)
#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS 0
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
extern int es7000_plat;
#endif
set_bit(MP_ISA_BUS, mp_bus_not_pci);
Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
-#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH)
+#ifdef CONFIG_X86_ES7000
/*
* Older generations of ES7000 have no legacy identity mappings
*/
* by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999
*/
-#ifndef CONFIG_X86_NUMAQ
static void __init setup_ioapic_ids_from_mpc(void)
{
union IO_APIC_reg_00 reg_00;
unsigned char old_id;
unsigned long flags;
+#ifdef CONFIG_X86_NUMAQ
+ if (found_numaq)
+ return;
+#endif
+
/*
* Don't check I/O APIC IDs for xAPIC systems. They have
* no meaning without the serial APIC bus.
apic_printk(APIC_VERBOSE, " ok.\n");
}
}
-#else
-static void __init setup_ioapic_ids_from_mpc(void) { }
-#endif
int no_timer_check __initdata;
}
#ifdef CONFIG_X86_NUMAQ
+int found_numaq;
/*
* Have to match translation table entries to main table entries by counter
* hence the mpc_record variable .... can't see a less disgusting way of
* doing this ....
*/
+struct mpc_config_translation {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
__cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+ return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+ struct mpc_config_translation *translation_record)
+{
+ int quad = translation_record->trans_quad;
+ int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+ printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver, quad, logical_apicid);
+ return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ mp_bus_id_to_node[m->mpc_busid] = quad;
+ mp_bus_id_to_local[m->mpc_busid] = local;
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+ m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+static void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
#endif
static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
}
}
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
+ printk("Warning! Not a NUMA-Q system!\n");
else
found_numaq = 1;
return 0;
#ifdef CONFIG_X86_32
- mps_oem_check(mpc, oem, str);
+ /*
+ * need to make sure summit and es7000's mps_oem_check is safe to be
+ * called early via genericarch 's mps_oem_check
+ */
+ if (early) {
+#ifdef CONFIG_X86_NUMAQ
+ numaq_mps_oem_check(mpc, oem, str);
+#endif
+ } else
+ mps_oem_check(mpc, oem, str);
#endif
/* save the local APIC address, it might be non-default */
#define MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
-int found_numaq;
-
/*
* Function: smp_dump_qct()
*
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+#ifndef CONFIG_X86_NUMAQ
static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+#endif
static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
#
obj-$(CONFIG_X86_ES7000) := es7000plat.o
-obj-$(CONFIG_X86_GENERICARCH) := es7000plat.o
}
#endif
-/*
- * This file also gets compiled if CONFIG_X86_GENERICARCH is set. Generic
- * arch already has got following function definitions (asm-generic/es7000.c)
- * hence no need to define these for that case.
- */
-#ifndef CONFIG_X86_GENERICARCH
-void es7000_sw_apic(void);
-void __init enable_apic_mode(void)
-{
- es7000_sw_apic();
- return;
-}
-
-__init int mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (mpc->mpc_oemptr) {
- struct mp_config_oemtable *oem_table =
- (struct mp_config_oemtable *)mpc->mpc_oemptr;
- if (!strncmp(oem, "UNISYS", 6))
- return parse_unisys_oem((char *)oem_table);
- }
- return 0;
-}
-#ifdef CONFIG_ACPI
-/* Hook from generic ACPI tables.c */
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- unsigned long oem_addr;
- if (!find_unisys_acpi_oem_table(&oem_addr)) {
- if (es7000_check_dsdt())
- return parse_unisys_oem((char *)oem_addr);
- else {
- setup_unisys();
- return 1;
- }
- }
- return 0;
-}
-#else
-int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
- return 0;
-}
-#endif
-#endif /* COFIG_X86_GENERICARCH */
-
static void
es7000_spin(int n)
{
# Makefile for the generic architecture
#
-EXTRA_CFLAGS := -Iarch/x86/kernel
+EXTRA_CFLAGS := -Iarch/x86/kernel
-obj-y := probe.o summit.o bigsmp.o es7000.o default.o
-obj-y += ../../x86/mach-es7000/
+obj-y := probe.o default.o
+obj-$(CONFIG_X86_NUMAQ) += numaq.o
+obj-$(CONFIG_X86_SUMMIT) += summit.o
+obj-$(CONFIG_X86_BIGSMP) += bigsmp.o
+obj-$(CONFIG_X86_ES7000) += es7000.o
+obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/
static int hp_ht_bigsmp(const struct dmi_system_id *d)
{
-#ifdef CONFIG_X86_GENERICARCH
printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
dmi_bigsmp = 1;
-#endif
return 0;
}
--- /dev/null
+/*
+ * APIC driver for the IBM NUMAQ chipset.
+ */
+#define APIC_DEFINITION 1
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <asm/mpspec.h>
+#include <asm/genapic.h>
+#include <asm/fixmap.h>
+#include <asm/apicdef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/mach-numaq/mach_apic.h>
+#include <asm/mach-numaq/mach_apicdef.h>
+#include <asm/mach-numaq/mach_ipi.h>
+#include <asm/mach-numaq/mach_mpparse.h>
+#include <asm/mach-numaq/mach_wakecpu.h>
+#include <asm/numaq.h>
+
+static int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ numaq_mps_oem_check(mpc, oem, productid);
+ return found_numaq;
+}
+
+static int probe_numaq(void)
+{
+ /* already know from get_memcfg_numaq() */
+ return found_numaq;
+}
+
+/* Hook from generic ACPI tables.c */
+static int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 0;
+}
+
+struct genapic apic_numaq = APIC_INIT("NUMAQ", probe_numaq);
#include <asm/apicdef.h>
#include <asm/genapic.h>
+extern struct genapic apic_numaq;
extern struct genapic apic_summit;
extern struct genapic apic_bigsmp;
extern struct genapic apic_es7000;
struct genapic *genapic = &apic_default;
static struct genapic *apic_probe[] __initdata = {
+#ifdef CONFIG_X86_NUMAQ
+ &apic_numaq,
+#endif
+#ifdef CONFIG_X86_SUMMIT
&apic_summit,
+#endif
+#ifdef CONFIG_X86_BIGSMP
&apic_bigsmp,
+#endif
+#ifdef CONFIG_X86_ES7000
&apic_es7000,
+#endif
&apic_default, /* must be last */
NULL,
};
void __init generic_bigsmp_probe(void)
{
+#if CONFIG_X86_BIGSMP
/*
* This routine is used to switch to bigsmp mode when
* - There is no apic= option specified by the user
printk(KERN_INFO "Overriding APIC driver with %s\n",
genapic->name);
}
+#endif
}
void __init generic_apic_probe(void)
/* These functions can switch the APIC even after the initial ->probe() */
-int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
+int __init mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
{
int i;
for (i = 0; apic_probe[i]; ++i) {
pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
-# Careful: VISWS and NUMAQ overrule the pci-y above. The colons are
+# Careful: VISWS overrule the pci-y above. The colons are
# therefor correct. This needs a proper fix by distangling the code.
pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
-pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o
+
+pci-$(CONFIG_X86_NUMAQ) += numa.o
# Necessary for NUMAQ as well
pci-$(CONFIG_NUMA) += mp_bus_to_node.o
#include <linux/init.h>
#include <linux/nodemask.h>
#include <mach_apic.h>
+#include <asm/mpspec.h>
#include "pci.h"
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
-int mp_bus_id_to_node[MAX_MP_BUSSES];
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-int mp_bus_id_to_local[MAX_MP_BUSSES];
#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- mp_bus_id_to_node[m->mpc_busid] = quad;
- mp_bus_id_to_local[m->mpc_busid] = local;
- printk(KERN_INFO "Bus #%d is %s (node %d)\n",
- m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
EXPORT_SYMBOL(xquad_portio);
-#endif
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
{
int quad;
+ if (!found_numaq)
+ return 0;
+
raw_pci_ops = &pci_direct_conf1_mq;
if (pcibios_scanned++)
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
- depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
#ifndef _MACH_MPPARSE_H
#define _MACH_MPPARSE_H 1
-int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid);
-int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
+
+extern int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
+
+extern int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
#endif
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
-#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
-#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline int apic_id_registered(void)
return BAD_APICID;
}
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
- return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
static inline int apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
return physid_mask_of_physid(cpu + 4*node);
}
-struct mpc_config_translation {
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- int quad = translation_record->trans_quad;
- int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
- printk("Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver, quad, logical_apicid);
- return logical_apicid;
-}
-
extern void *xquad_portio;
static inline void setup_portio_remap(void)
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation);
-extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation);
-
-/* Hook from generic ACPI tables.c */
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-}
+extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid);
#endif /* __ASM_MACH_MPPARSE_H */
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[nid])
-#ifdef CONFIG_X86_NUMAQ
- #include <asm/numaq.h>
-#elif defined(CONFIG_ACPI_SRAT)/* summit or generic arch */
- #include <asm/srat.h>
-#endif
+#include <asm/numaq.h>
+/* summit or generic arch */
+#include <asm/srat.h>
extern int get_memcfg_numa_flat(void);
/*
*/
static inline void get_memcfg_numa(void)
{
-#ifdef CONFIG_X86_NUMAQ
+
if (get_memcfg_numaq())
return;
-#elif defined(CONFIG_ACPI_SRAT)
if (get_memcfg_from_srat())
return;
-#endif
-
get_memcfg_numa_flat();
}
#else /* !CONFIG_NUMA */
#define get_memcfg_numa get_memcfg_numa_flat
-#define get_zholes_size(n) (0)
#endif /* CONFIG_NUMA */
__pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
})
-#ifdef CONFIG_X86_NUMAQ /* we have contiguous memory on NUMA-Q */
-#define pfn_valid(pfn) ((pfn) < num_physpages)
-#else
static inline int pfn_valid(int pfn)
{
int nid = pfn_to_nid(pfn);
return (pfn < node_end_pfn(nid));
return 0;
}
-#endif /* CONFIG_X86_NUMAQ */
#endif /* CONFIG_DISCONTIGMEM */
extern u8 apicid_2_node[];
extern int pic_mode;
+#ifdef CONFIG_X86_NUMAQ
+extern int mp_bus_id_to_node[MAX_MP_BUSSES];
+extern int mp_bus_id_to_local[MAX_MP_BUSSES];
+extern int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#endif
+
#define MAX_APICID 256
#else
struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
};
-static inline unsigned long *get_zholes_size(int nid)
+#else
+static inline int get_memcfg_numaq(void)
{
- return NULL;
+ return 0;
}
#endif /* CONFIG_X86_NUMAQ */
#endif /* NUMAQ_H */
#ifndef _ASM_SRAT_H_
#define _ASM_SRAT_H_
-#ifndef CONFIG_ACPI_SRAT
-#error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
-#endif
-
+#ifdef CONFIG_ACPI_SRAT
extern int get_memcfg_from_srat(void);
-extern unsigned long *get_zholes_size(int);
+#else
+static inline int get_memcfg_from_srat(void)
+{
+ return 0;
+}
+#endif
#endif /* _ASM_SRAT_H_ */
projects / linux-2.6-omap-h63xx.git / commitdiff