]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
mac80211: adding 802.11n configuration flows
authorRon Rindjunsky <ron.rindjunsky@intel.com>
Mon, 26 Nov 2007 14:14:34 +0000 (16:14 +0200)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 22:55:33 +0000 (14:55 -0800)
This patch configures the 802.11n mode of operation
internally in ieee80211_conf structure and in the low-level
driver as well (through op conf_ht).
It does not include AP configuration flows.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
include/net/mac80211.h
net/mac80211/ieee80211.c
net/mac80211/ieee80211_i.h
net/mac80211/ieee80211_sta.c

index 79e96455438a50168206c231c562e106ff46e9b8..0d67b331ee7252cd140ff65ecab2e64e65aa95ed 100644 (file)
@@ -1041,6 +1041,8 @@ enum ieee80211_erp_change_flags {
  * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us.
  *     This is needed only for IBSS mode and the result of this function is
  *     used to determine whether to reply to Probe Requests.
+ *
+ * @conf_ht: Configures low level driver with 802.11n HT data. Must be atomic.
  */
 struct ieee80211_ops {
        int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb,
@@ -1086,6 +1088,7 @@ struct ieee80211_ops {
                             struct sk_buff *skb,
                             struct ieee80211_tx_control *control);
        int (*tx_last_beacon)(struct ieee80211_hw *hw);
+       int (*conf_ht)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
 };
 
 /**
index 4f8b6653e3642ac60f8e2c228831c30ffd7e927d..d6a97a68a62ea518b4d0f584ca27ddac15c96c2b 100644 (file)
@@ -34,6 +34,8 @@
 #include "debugfs.h"
 #include "debugfs_netdev.h"
 
+#define SUPP_MCS_SET_LEN 16
+
 /*
  * For seeing transmitted packets on monitor interfaces
  * we have a radiotap header too.
@@ -563,6 +565,55 @@ int ieee80211_hw_config(struct ieee80211_local *local)
        return ret;
 }
 
+/**
+ * ieee80211_hw_config_ht should be used only after legacy configuration
+ * has been determined, as ht configuration depends upon the hardware's
+ * HT abilities for a _specific_ band.
+ */
+int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht,
+                          struct ieee80211_ht_info *req_ht_cap,
+                          struct ieee80211_ht_bss_info *req_bss_cap)
+{
+       struct ieee80211_conf *conf = &local->hw.conf;
+       struct ieee80211_hw_mode *mode = conf->mode;
+       int i;
+
+       /* HT is not supported */
+       if (!mode->ht_info.ht_supported) {
+               conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+               return -EOPNOTSUPP;
+       }
+
+       /* disable HT */
+       if (!enable_ht) {
+               conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
+       } else {
+               conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
+               conf->ht_conf.cap = req_ht_cap->cap & mode->ht_info.cap;
+               conf->ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
+               conf->ht_conf.cap |=
+                       mode->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
+               conf->ht_bss_conf.primary_channel =
+                       req_bss_cap->primary_channel;
+               conf->ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
+               conf->ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
+               for (i = 0; i < SUPP_MCS_SET_LEN; i++)
+                       conf->ht_conf.supp_mcs_set[i] =
+                               mode->ht_info.supp_mcs_set[i] &
+                                 req_ht_cap->supp_mcs_set[i];
+
+               /* In STA mode, this gives us indication
+                * to the AP's mode of operation */
+               conf->ht_conf.ht_supported = 1;
+               conf->ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
+               conf->ht_conf.ampdu_density = req_ht_cap->ampdu_density;
+       }
+
+       local->ops->conf_ht(local_to_hw(local), &local->hw.conf);
+
+       return 0;
+}
+
 void ieee80211_erp_info_change_notify(struct net_device *dev, u8 changes)
 {
        struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
index 66b6cf3a62ac7e9ab5318e21b202e75674bb10cd..2dcb9425fe8f88e521365f0630a87dd751869a83 100644 (file)
@@ -708,6 +708,9 @@ int ieee80211_if_update_wds(struct net_device *dev, u8 *remote_addr);
 void ieee80211_if_setup(struct net_device *dev);
 struct ieee80211_rate *ieee80211_get_rate(struct ieee80211_local *local,
                                          int phymode, int hwrate);
+int ieee80211_hw_config_ht(struct ieee80211_local *local, int enable_ht,
+                          struct ieee80211_ht_info *req_ht_cap,
+                          struct ieee80211_ht_bss_info *req_bss_cap);
 
 /* ieee80211_ioctl.c */
 extern const struct iw_handler_def ieee80211_iw_handler_def;
index 1d553d78b2275f7cc7a448d534853599062fc134..87830c04a1caf4d1904da04efa169162b9060d9c 100644 (file)
@@ -1437,6 +1437,19 @@ static void ieee80211_rx_mgmt_assoc_resp(struct net_device *dev,
        }
        sta->supp_rates = rates;
 
+       if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
+           local->ops->conf_ht) {
+               struct ieee80211_ht_bss_info bss_info;
+
+               ieee80211_ht_cap_ie_to_ht_info(
+                               (struct ieee80211_ht_cap *)
+                               elems.ht_cap_elem, &sta->ht_info);
+               ieee80211_ht_addt_info_ie_to_ht_bss_info(
+                               (struct ieee80211_ht_addt_info *)
+                               elems.ht_info_elem, &bss_info);
+               ieee80211_hw_config_ht(local, 1, &sta->ht_info, &bss_info);
+       }
+
        rate_control_rate_init(sta, local);
 
        if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
@@ -1859,6 +1872,8 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
        struct ieee80211_if_sta *ifsta;
        size_t baselen;
        struct ieee802_11_elems elems;
+       struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+       struct ieee80211_conf *conf = &local->hw.conf;
 
        ieee80211_rx_bss_info(dev, mgmt, len, rx_status, 1);
 
@@ -1881,6 +1896,23 @@ static void ieee80211_rx_mgmt_beacon(struct net_device *dev,
        if (elems.erp_info && elems.erp_info_len >= 1)
                ieee80211_handle_erp_ie(dev, elems.erp_info[0]);
 
+       if (elems.ht_cap_elem && elems.ht_info_elem &&
+           elems.wmm_param && local->ops->conf_ht &&
+           conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+               struct ieee80211_ht_bss_info bss_info;
+
+               ieee80211_ht_addt_info_ie_to_ht_bss_info(
+                               (struct ieee80211_ht_addt_info *)
+                               elems.ht_info_elem, &bss_info);
+               /* check if AP changed bss inforamation */
+               if ((conf->ht_bss_conf.primary_channel !=
+                    bss_info.primary_channel) ||
+                   (conf->ht_bss_conf.bss_cap != bss_info.bss_cap) ||
+                   (conf->ht_bss_conf.bss_op_mode != bss_info.bss_op_mode))
+                       ieee80211_hw_config_ht(local, 1, &conf->ht_conf,
+                                               &bss_info);
+       }
+
        if (elems.wmm_param && (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
                ieee80211_sta_wmm_params(dev, ifsta, elems.wmm_param,
                                         elems.wmm_param_len);