specialix: Code cleanups

Go through the inlines and other oddments that are iffy. Remove various bits
of dead code and bogus debug. Turn the crtsdts compile time option into a
runtime switch.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt
index 4a4b428ce8f67839cf3dd407c975d080f2c655f0..6eb6f3a3331c2656b69156b3c308308500b58d98 100644 (file)
--- a/Documentation/specialix.txt
+++ b/Documentation/specialix.txt
@@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is:
 Hardware handshaking issues.
 ============================
 
-The driver can be compiled in two different ways. The default
-("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when
+The driver can be told to operate in two different ways. The default
+behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
 hardware handshaking is off. It behaves as the RTS hardware
 handshaking signal when hardware handshaking is selected.
 
@@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with
 software handshaking. So switching on the fly is not really an
 option.
 
-I actually prefer to use the "Specialix DTR/RTS pin is RTS" option.
+I actually prefer to use the "specialix.sx_rtscts=1" option.
 This makes the DTR/RTS pin always an RTS pin, and ioctls to
 change DTR are always ignored. I have a cable that is configured
 for this. 
@@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card.
             You have to WRITE to the address register to even 
             read-probe a CD186x register. Disable autodetection?
          -- Specialix: any suggestions?
-       - Arbitrary baud rates are not implemented yet. 
-            If you need this, bug me about it. 
 
 

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 650e6b44ce65942471a98bfcbdae8759fe1ffcbc..e0bbbfb6a36bd2b98092a641ef1b496f3a6b9e07 100644 (file)
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -300,16 +300,6 @@ config SPECIALIX
          and compile this driver as kernel loadable module which will be
          called specialix.
 
-config SPECIALIX_RTSCTS
-       bool "Specialix DTR/RTS pin is RTS"
-       depends on SPECIALIX
-       help
-         The Specialix IO8+ card can only support either RTS or DTR. If you
-         say N here, the driver will use the pin as "DTR" when the tty is in
-         software handshake mode.  If you say Y here or hardware handshake is
-         on, it will always be RTS.  Read the file
-         <file:Documentation/specialix.txt> for more information.
-
 config SX
        tristate "Specialix SX (and SI) card support"
        depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)

diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index c390c6cc030e2caaeab5df7ce0e104a306b67eb3..f3184a8a75d656d16e6d10efbc0bdb184f595739 100644 (file)
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -110,6 +110,7 @@
 
 static int sx_debug;
 static int sx_rxfifo = SPECIALIX_RXFIFO;
+static int sx_rtscts;
 
 #ifdef DEBUG
 #define dprintk(f, str...) if (sx_debug & f) printk(str)
@@ -134,25 +135,12 @@ static int sx_rxfifo = SPECIALIX_RXFIFO;
 #define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__)
 #define func_exit()  dprintk(SX_DEBUG_FLOW, "io8: exit  %s\n", __func__)
 
-#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1)
-
 
 /* Configurable options: */
 
 /* Am I paranoid or not ? ;-) */
 #define SPECIALIX_PARANOIA_CHECK
 
-/* Do I trust the IRQ from the card? (enabeling it doesn't seem to help)
-   When the IRQ routine leaves the chip in a state that is keeps on
-   requiring attention, the timer doesn't help either. */
-#undef SPECIALIX_TIMER
-
-#ifdef SPECIALIX_TIMER
-static int sx_poll = HZ;
-#endif
-
-
-
 /*
  * The following defines are mostly for testing purposes. But if you need
  * some nice reporting in your syslog, you can define them also.
@@ -162,16 +150,6 @@ static int sx_poll = HZ;
 
 
 
-#ifdef CONFIG_SPECIALIX_RTSCTS
-#define SX_CRTSCTS(bla) 1
-#else
-#define SX_CRTSCTS(tty) C_CRTSCTS(tty)
-#endif
-
-
-/* Used to be outb(0xff, 0x80); */
-#define short_pause() udelay(1)
-
 
 #define SPECIALIX_LEGAL_FLAGS \
        (ASYNC_HUP_NOTIFY   | ASYNC_SAK          | ASYNC_SPLIT_TERMIOS   | \
@@ -190,14 +168,7 @@ static struct specialix_board sx_board[SX_NBOARD] =  {
 static struct specialix_port sx_port[SX_NBOARD * SX_NPORT];
 
 
-#ifdef SPECIALIX_TIMER
-static struct timer_list missed_irq_timer;
-static irqreturn_t sx_interrupt(int irq, void *dev_id);
-#endif
-
-
-
-static inline int sx_paranoia_check(struct specialix_port const *port,
+static int sx_paranoia_check(struct specialix_port const *port,
                                    char *name, const char *routine)
 {
 #ifdef SPECIALIX_PARANOIA_CHECK
@@ -288,7 +259,7 @@ static inline void sx_out_off(struct specialix_board  *bp,
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR(struct specialix_board  *bp)
+static void sx_wait_CCR(struct specialix_board  *bp)
 {
        unsigned long delay, flags;
        unsigned char ccr;
@@ -307,7 +278,7 @@ static inline void sx_wait_CCR(struct specialix_board  *bp)
 
 
 /* Wait for Channel Command Register ready */
-static inline void sx_wait_CCR_off(struct specialix_board  *bp)
+static void sx_wait_CCR_off(struct specialix_board  *bp)
 {
        unsigned long delay;
        unsigned char crr;
@@ -330,7 +301,7 @@ static inline void sx_wait_CCR_off(struct specialix_board  *bp)
  *  specialix IO8+ IO range functions.
  */
 
-static inline int sx_request_io_range(struct specialix_board *bp)
+static int sx_request_io_range(struct specialix_board *bp)
 {
        return request_region(bp->base,
                bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE,
@@ -338,7 +309,7 @@ static inline int sx_request_io_range(struct specialix_board *bp)
 }
 
 
-static inline void sx_release_io_range(struct specialix_board *bp)
+static void sx_release_io_range(struct specialix_board *bp)
 {
        release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ?
                                        SX_PCI_IO_SPACE : SX_IO_SPACE);
@@ -440,36 +411,10 @@ static int read_cross_byte(struct specialix_board *bp, int reg, int bit)
 }
 
 
-#ifdef SPECIALIX_TIMER
-void missed_irq(unsigned long data)
-{
-       unsigned char irq;
-       unsigned long flags;
-       struct specialix_board  *bp = (struct specialix_board *)data;
-
-       spin_lock_irqsave(&bp->lock, flags);
-       irq = sx_in((struct specialix_board *)data, CD186x_SRSR) &
-                               (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint);
-       spin_unlock_irqrestore(&bp->lock, flags);
-       if (irq) {
-               printk(KERN_INFO
-                       "Missed interrupt... Calling int from timer. \n");
-               sx_interrupt(-1, bp);
-       }
-       mod_timer(&missed_irq_timer, jiffies + sx_poll);
-}
-#endif
-
-
-
 /* Main probing routine, also sets irq. */
 static int sx_probe(struct specialix_board *bp)
 {
        unsigned char val1, val2;
-#if 0
-       int irqs = 0;
-       int retries;
-#endif
        int rev;
        int chip;
 
@@ -482,15 +427,15 @@ static int sx_probe(struct specialix_board *bp)
 
        /* Are the I/O ports here ? */
        sx_out_off(bp, CD186x_PPRL, 0x5a);
-       short_pause();
+       udelay(1);
        val1 = sx_in_off(bp, CD186x_PPRL);
 
        sx_out_off(bp, CD186x_PPRL, 0xa5);
-       short_pause();
+       udelay(1);
        val2 = sx_in_off(bp, CD186x_PPRL);
 
 
-       if ((val1 != 0x5a) || (val2 != 0xa5)) {
+       if (val1 != 0x5a || val2 != 0xa5) {
                printk(KERN_INFO
                        "sx%d: specialix IO8+ Board at 0x%03x not found.\n",
                                                board_No(bp), bp->base);
@@ -522,50 +467,6 @@ static int sx_probe(struct specialix_board *bp)
        }
 
 
-#if 0
-       /* It's time to find IRQ for this board */
-       for (retries = 0; retries < 5 && irqs <= 0; retries++) {
-               irqs = probe_irq_on();
-               sx_init_CD186x(bp);                /* Reset CD186x chip      */
-               sx_out(bp, CD186x_CAR, 2);         /* Select port 2          */
-               sx_wait_CCR(bp);
-               sx_out(bp, CD186x_CCR, CCR_TXEN);  /* Enable transmitter     */
-               sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr   */
-               msleep(50);
-               irqs = probe_irq_off(irqs);
-
-               dprintk(SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR));
-               dprintk(SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR));
-               dprintk(SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR));
-               dprintk(SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR));
-               dprintk(SX_DEBUG_INIT, "\n");
-
-               /* Reset CD186x again      */
-               if (!sx_init_CD186x(bp)) {
-                       /* Hmmm. This is dead code anyway. */
-               }
-
-               dprintk(SX_DEBUG_INIT
-                       "val1 = %02x, val2 = %02x, val3 = %02x.\n",
-                               val1, val2, val3);
-
-       }
-
-#if 0
-       if (irqs <= 0) {
-               printk(KERN_ERR
-                 "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n",
-                                               board_No(bp), bp->base);
-               sx_release_io_range(bp);
-               func_exit();
-               return 1;
-       }
-#endif
-       printk(KERN_INFO "Started with irq=%d, but now have irq=%d.\n",
-                                                               bp->irq, irqs);
-       if (irqs > 0)
-               bp->irq = irqs;
-#endif
        /* Reset CD186x again  */
        if (!sx_init_CD186x(bp)) {
                sx_release_io_range(bp);
@@ -610,11 +511,6 @@ static int sx_probe(struct specialix_board *bp)
 
        dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR));
 
-#ifdef SPECIALIX_TIMER
-       setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp);
-       mod_timer(&missed_irq_timer, jiffies + sx_poll);
-#endif
-
        printk(KERN_INFO
     "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n",
                                board_No(bp), bp->base, bp->irq, chip, rev);
@@ -628,7 +524,7 @@ static int sx_probe(struct specialix_board *bp)
  *  Interrupt processing routines.
  * */
 
-static inline struct specialix_port *sx_get_port(struct specialix_board *bp,
+static struct specialix_port *sx_get_port(struct specialix_board *bp,
                                               unsigned char const *what)
 {
        unsigned char channel;
@@ -654,7 +550,7 @@ static inline struct specialix_port *sx_get_port(struct specialix_board *bp,
 }
 
 
-static inline void sx_receive_exc(struct specialix_board *bp)
+static void sx_receive_exc(struct specialix_board *bp)
 {
        struct specialix_port *port;
        struct tty_struct *tty;
@@ -729,7 +625,7 @@ static inline void sx_receive_exc(struct specialix_board *bp)
 }
 
 
-static inline void sx_receive(struct specialix_board *bp)
+static void sx_receive(struct specialix_board *bp)
 {
        struct specialix_port *port;
        struct tty_struct *tty;
@@ -758,7 +654,7 @@ static inline void sx_receive(struct specialix_board *bp)
 }
 
 
-static inline void sx_transmit(struct specialix_board *bp)
+static void sx_transmit(struct specialix_board *bp)
 {
        struct specialix_port *port;
        struct tty_struct *tty;
@@ -838,7 +734,7 @@ static inline void sx_transmit(struct specialix_board *bp)
 }
 
 
-static inline void sx_check_modem(struct specialix_board *bp)
+static void sx_check_modem(struct specialix_board *bp)
 {
        struct specialix_port *port;
        struct tty_struct *tty;
@@ -853,7 +749,6 @@ static inline void sx_check_modem(struct specialix_board *bp)
        tty = port->port.tty;
 
        mcr = sx_in(bp, CD186x_MCR);
-       printk("mcr = %02x.\n", mcr);   /* FIXME */
 
        if ((mcr & MCR_CDCHG)) {
                dprintk(SX_DEBUG_SIGNALS, "CD just changed... ");
@@ -983,13 +878,6 @@ static void turn_ints_off(struct specialix_board *bp)
        unsigned long flags;
 
        func_enter();
-       if (bp->flags & SX_BOARD_IS_PCI) {
-               /* This was intended for enabeling the interrupt on the
-                * PCI card. However it seems that it's already enabled
-                * and as PCI interrupts can be shared, there is no real
-                * reason to have to turn it off. */
-       }
-
        spin_lock_irqsave(&bp->lock, flags);
        (void) sx_in_off(bp, 0); /* Turn off interrupts. */
        spin_unlock_irqrestore(&bp->lock, flags);
@@ -1003,9 +891,6 @@ static void turn_ints_on(struct specialix_board *bp)
 
        func_enter();
 
-       if (bp->flags & SX_BOARD_IS_PCI) {
-               /* play with the PCI chip. See comment above. */
-       }
        spin_lock_irqsave(&bp->lock, flags);
        (void) sx_in(bp, 0); /* Turn ON interrupts. */
        spin_unlock_irqrestore(&bp->lock, flags);
@@ -1015,7 +900,7 @@ static void turn_ints_on(struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline int sx_setup_board(struct specialix_board *bp)
+static int sx_setup_board(struct specialix_board *bp)
 {
        int error;
 
@@ -1040,7 +925,7 @@ static inline int sx_setup_board(struct specialix_board *bp)
 
 
 /* Called with disabled interrupts */
-static inline void sx_shutdown_board(struct specialix_board *bp)
+static void sx_shutdown_board(struct specialix_board *bp)
 {
        func_enter();
 
@@ -1058,6 +943,12 @@ static inline void sx_shutdown_board(struct specialix_board *bp)
        func_exit();
 }
 
+static unsigned int sx_crtscts(struct tty_struct *tty)
+{
+       if (sx_rtscts)
+               return C_CRTSCTS(tty);
+       return 1;
+}
 
 /*
  * Setting up port characteristics.
@@ -1090,7 +981,7 @@ static void sx_change_speed(struct specialix_board *bp,
 
        /* The Specialix board doens't implement the RTS lines.
           They are used to set the IRQ level. Don't touch them. */
-       if (SX_CRTSCTS(tty))
+       if (sx_crtscts(tty))
                port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
        else
                port->MSVR =  (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
@@ -1108,7 +999,7 @@ static void sx_change_speed(struct specialix_board *bp,
        if (!baud) {
                /* Drop DTR & exit */
                dprintk(SX_DEBUG_TERMIOS, "Dropping DTR...  Hmm....\n");
-               if (!SX_CRTSCTS(tty)) {
+               if (!sx_crtscts(tty)) {
                        port->MSVR &= ~MSVR_DTR;
                        spin_lock_irqsave(&bp->lock, flags);
                        sx_out(bp, CD186x_MSVR, port->MSVR);
@@ -1118,7 +1009,7 @@ static void sx_change_speed(struct specialix_board *bp,
                return;
        } else {
                /* Set DTR on */
-               if (!SX_CRTSCTS(tty))
+               if (!sx_crtscts(tty))
                        port->MSVR |= MSVR_DTR;
        }
 
@@ -1448,7 +1339,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                spin_lock_irqsave(&bp->lock, flags);
                sx_out(bp, CD186x_CAR, port_No(port));
                CD = sx_in(bp, CD186x_MSVR) & MSVR_CD;
-               if (SX_CRTSCTS(tty)) {
+               if (sx_crtscts(tty)) {
                        /* Activate RTS */
                        port->MSVR |= MSVR_DTR;         /* WTF? */
                        sx_out(bp, CD186x_MSVR, port->MSVR);
@@ -1600,7 +1491,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp)
        }
 
        bp = port_Board(port);
-       if ((tty->count == 1) && (port->port.count != 1)) {
+       if (tty->count == 1 && port->port.count != 1) {
                printk(KERN_ERR "sx%d: sx_close: bad port count;"
                       " tty->count is 1, port count is %d\n",
                       board_No(bp), port->port.count);
@@ -1868,17 +1759,15 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file)
        dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n",
                        port_No(port), status, sx_in(bp, CD186x_CAR));
        dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port);
-       if (SX_CRTSCTS(port->port.tty)) {
-               result  = /*   (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */
+       if (sx_crtscts(port->port.tty)) {
+               result  = TIOCM_DTR | TIOCM_DSR
                          |   ((status & MSVR_DTR) ? TIOCM_RTS : 0)
                          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-                         |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
                          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
        } else {
-               result  = /*   (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */
+               result  = TIOCM_RTS | TIOCM_DSR
                          |   ((status & MSVR_DTR) ? TIOCM_DTR : 0)
                          |   ((status & MSVR_CD)  ? TIOCM_CAR : 0)
-                         |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */
                          |   ((status & MSVR_CTS) ? TIOCM_CTS : 0);
        }
 
@@ -1905,24 +1794,14 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
        bp = port_Board(port);
 
        spin_lock_irqsave(&port->lock, flags);
-   /*  if (set & TIOCM_RTS)
-               port->MSVR |= MSVR_RTS; */
-   /*   if (set & TIOCM_DTR)
-               port->MSVR |= MSVR_DTR; */
-
-       if (SX_CRTSCTS(port->port.tty)) {
+       if (sx_crtscts(port->port.tty)) {
                if (set & TIOCM_RTS)
                        port->MSVR |= MSVR_DTR;
        } else {
                if (set & TIOCM_DTR)
                        port->MSVR |= MSVR_DTR;
        }
-
-  /*   if (clear & TIOCM_RTS)
-               port->MSVR &= ~MSVR_RTS; */
-  /*    if (clear & TIOCM_DTR)
-               port->MSVR &= ~MSVR_DTR; */
-       if (SX_CRTSCTS(port->port.tty)) {
+       if (sx_crtscts(port->port.tty)) {
                if (clear & TIOCM_RTS)
                        port->MSVR &= ~MSVR_DTR;
        } else {
@@ -1939,7 +1818,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 }
 
 
-static inline void sx_send_break(struct specialix_port *port,
+static void sx_send_break(struct specialix_port *port,
                                                unsigned long length)
 {
        struct specialix_board *bp = port_Board(port);
@@ -1967,7 +1846,7 @@ static inline void sx_send_break(struct specialix_port *port,
 }
 
 
-static inline int sx_set_serial_info(struct specialix_port *port,
+static int sx_set_serial_info(struct specialix_port *port,
                                        struct serial_struct __user *newinfo)
 {
        struct serial_struct tmp;
@@ -2015,7 +1894,7 @@ static inline int sx_set_serial_info(struct specialix_port *port,
 }
 
 
-static inline int sx_get_serial_info(struct specialix_port *port,
+static int sx_get_serial_info(struct specialix_port *port,
                                     struct serial_struct __user *retinfo)
 {
        struct serial_struct tmp;
@@ -2112,7 +1991,7 @@ static void sx_throttle(struct tty_struct *tty)
        bp = port_Board(port);
 
        /* Use DTR instead of RTS ! */
-       if (SX_CRTSCTS(tty))
+       if (sx_crtscts(tty))
                port->MSVR &= ~MSVR_DTR;
        else {
                /* Auch!!! I think the system shouldn't call this then. */
@@ -2158,7 +2037,7 @@ static void sx_unthrottle(struct tty_struct *tty)
 
        spin_lock_irqsave(&port->lock, flags);
        /* XXXX Use DTR INSTEAD???? */
-       if (SX_CRTSCTS(tty))
+       if (sx_crtscts(tty))
                port->MSVR |= MSVR_DTR;
        /* Else clause: see remark in "sx_throttle"... */
        spin_lock_irqsave(&bp->lock, flags);
@@ -2381,11 +2260,11 @@ static int __init specialix_init(void)
 
        printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n");
        printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n");
-#ifdef CONFIG_SPECIALIX_RTSCTS
-       printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
-#else
-       printk(KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
-#endif
+       if (sx_rtscts)
+               printk(KERN_INFO
+                       "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n");
+       else
+               printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n");
 
        for (i = 0; i < SX_NBOARD; i++)
                spin_lock_init(&sx_board[i].lock);
@@ -2443,16 +2322,13 @@ static int __init specialix_init(void)
 }
 
 static int iobase[SX_NBOARD]  = {0,};
-
-static int irq [SX_NBOARD] = {0,};
+static int irq[SX_NBOARD] = {0,};
 
 module_param_array(iobase, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param(sx_debug, int, 0);
+module_param(sx_rtscts, int, 0);
 module_param(sx_rxfifo, int, 0);
-#ifdef SPECIALIX_TIMER
-module_param(sx_poll, int, 0);
-#endif
 
 /*
  * You can setup up to 4 boards.
@@ -2492,10 +2368,6 @@ static void __exit specialix_exit_module(void)
        for (i = 0; i < SX_NBOARD; i++)
                if (sx_board[i].flags & SX_BOARD_PRESENT)
                        sx_release_io_range(&sx_board[i]);
-#ifdef SPECIALIX_TIMER
-       del_timer_sync(&missed_irq_timer);
-#endif
-
        func_exit();
 }