]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
spi_s3c24xx: pin configuration updates
authorBen Dooks <ben-linux@fluff.org>
Thu, 16 Oct 2008 05:02:41 +0000 (22:02 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 16 Oct 2008 18:21:38 +0000 (11:21 -0700)
Add a pin configuration callback for the s3c24xx SPI driver, as there are
several options depending on the channel and the chip in use.

This is needed as the controller may not have been setup by the initial
bootloader and the fact that the SPI controller gets reset over
suspend/resume into slave mode but the GPIO function registers do not.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/arm/mach-s3c2410/include/mach/spi.h
drivers/spi/spi_s3c24xx.c

index 921b13b4f0a055dc3c036138149e6ca14db8fc89..46d46f5b99f2817b92c43729928371f0d3a8fb08 100644 (file)
@@ -18,6 +18,7 @@ struct s3c2410_spi_info {
        unsigned int             num_cs;        /* total chipselects */
        int                      bus_num;       /* bus number to use. */
 
+       void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
        void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
 
index 3eb414b84a9d5a2f82482bec675e22c969d4c224..c252cbac00f1d14ef273f53dea2ca7f39edd38b5 100644 (file)
@@ -247,6 +247,9 @@ static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
        writeb(0xff, hw->regs + S3C2410_SPPRE);
        writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
        writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+       if (hw->pdata && hw->pdata->gpio_setup)
+               hw->pdata->gpio_setup(hw->pdata, 1);
 }
 
 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
@@ -412,6 +415,9 @@ static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
 {
        struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
+       if (hw->pdata && hw->pdata->gpio_setup)
+               hw->pdata->gpio_setup(hw->pdata, 0);
+
        clk_disable(hw->clk);
        return 0;
 }