]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
sky2: handle advanced error recovery config issues
authorStephen Hemminger <shemminger@linux-foundation.org>
Mon, 5 Nov 2007 23:52:13 +0000 (15:52 -0800)
committerJeff Garzik <jeff@garzik.org>
Sat, 10 Nov 2007 09:25:09 +0000 (04:25 -0500)
The PCI AER support may not work for a couple of reasons.
It may not be configured into the kernel or there may be a BIOS
bug that prevents MMCONFIG from working.  If MMCONFIG doesn't work
then the PCI registers that control AER will not be accessible via
pci_read_config functions; luckly there is another window to access
PCI space in the device, so use that.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/sky2.c
drivers/net/sky2.h

index 76038bbeb50eaa4da7233f41306da629b78feb1e..a6ccd11574d03a894a6dc5da19cfc05f37176ade 100644 (file)
@@ -2435,13 +2435,26 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
        if (status & Y2_IS_PCI_EXP) {
                /* PCI-Express uncorrectable Error occurred */
-               int pos = pci_find_aer_capability(hw->pdev);
+               int aer = pci_find_aer_capability(hw->pdev);
                u32 err;
 
-               pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err);
+               if (aer) {
+                       pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
+                                             &err);
+                       pci_cleanup_aer_uncorrect_error_status(pdev);
+               } else {
+                       /* Either AER not configured, or not working
+                        * because of bad MMCONFIG, so just do recover
+                        * manually.
+                        */
+                       err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+                       sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+                                    0xfffffffful);
+               }
+
                if (net_ratelimit())
                        dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
-               pci_cleanup_aer_uncorrect_error_status(pdev);
+
        }
 
        if (status & Y2_HWE_L1_MASK)
@@ -2799,9 +2812,18 @@ static void sky2_reset(struct sky2_hw *hw)
 
        cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
        if (cap) {
-               /* Check for advanced error reporting */
-               pci_cleanup_aer_uncorrect_error_status(pdev);
-               pci_cleanup_aer_correct_error_status(pdev);
+               if (pci_find_aer_capability(pdev)) {
+                       /* Check for advanced error reporting */
+                       pci_cleanup_aer_uncorrect_error_status(pdev);
+                       pci_cleanup_aer_correct_error_status(pdev);
+               } else {
+                       dev_warn(&pdev->dev,
+                               "PCI Express Advanced Error Reporting"
+                               " not configured or MMCONFIG problem?\n");
+
+                       sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+                                    0xfffffffful);
+               }
 
                /* If error bit is stuck on ignore it */
                if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
index 49ee264064ab85dc95ac522b93e72b8e240e7fa1..69525fd7908db70e898d51768b0c3dd6a557becb 100644 (file)
@@ -247,7 +247,8 @@ enum csr_regs {
        B3_PA_CTRL      = 0x01f0,
        B3_PA_TEST      = 0x01f2,
 
-       Y2_CFG_SPC      = 0x1c00,
+       Y2_CFG_SPC      = 0x1c00,       /* PCI config space region */
+       Y2_CFG_AER      = 0x1d00,       /* PCI Advanced Error Report region */
 };
 
 /*     B0_CTST                 16 bit  Control/Status register */