/*
- cx231xx_avcore.c - driver for Conexant Cx23100/101/102 USB video capture devices
+ cx231xx_avcore.c - driver for Conexant Cx23100/101/102
+ USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
#include "cx231xx.h"
-/*************************************************************************************
- * C O L I B R I - B L O C K C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * C O L I B R I - B L O C K C O N T R O L functions *
+ ********************************************************************* ********/
int cx231xx_colibri_init_super_block(struct cx231xx *dev, u32 ref_count)
{
int status = 0;
/* super block initialize */
temp = (u8) (ref_count & 0xff);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE2,
- 2, temp, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_TUNE2, 2, temp, 1);
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE2, 2,
- &colibri_power_status, 1);
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_TUNE2, 2,
+ &colibri_power_status, 1);
temp = (u8) ((ref_count & 0x300) >> 8);
temp |= 0x40;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE1,
- 2, temp, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_PLL2, 2,
- 0x0f, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_TUNE1, 2, temp, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PLL2, 2, 0x0f, 1);
/* enable pll */
while (colibri_power_status != 0x18) {
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2, 0x18, 1);
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2, 0x18, 1);
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status, 1);
colibri_power_status &= 0xff;
if (status < 0) {
- cx231xx_info
- (": Init Super Block failed in sending/receiving cmds\n");
+ cx231xx_info(": Init Super Block failed in sending/receiving cmds\n");
break;
}
i++;
if (i == 10) {
- cx231xx_info
- (": Init Super Block force break in loop !!!!\n");
+ cx231xx_info(": Init Super Block force break in loop !!!!\n");
status = -1;
break;
}
return status;
/* start tuning filter */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, SUP_BLK_TUNE3,
- 2, 0x40, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ SUP_BLK_TUNE3, 2, 0x40, 1);
msleep(5);
/* exit tuning */
int status = 0;
/* power up all 3 channels, clear pd_buffer */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00, 1);
/* Enable quantizer calibration */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS, ADC_COM_QUANT,
- 2, 0x02, 1);
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ ADC_COM_QUANT, 2, 0x02, 1);
/* channel initialize, force modulator (fb) reset */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH1, 2, 0x17, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH2, 2, 0x17, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH3, 2, 0x17, 1);
/* start quantilizer calibration */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_CAL_ATEST_CH1, 2, 0x10, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_CAL_ATEST_CH2, 2, 0x10, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_CAL_ATEST_CH3, 2, 0x10, 1);
msleep(5);
/* exit modulator (fb) reset */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH1, 2, 0x07, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH2, 2, 0x07, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_FB_FRCRST_CH3, 2, 0x07, 1);
/* enable the pre_clamp in each channel for single-ended input */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH1, 2, 0xf0, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH2, 2, 0xf0, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH3, 2, 0xf0, 1);
/* use diode instead of resistor, so set term_en to 0, res_en to 0 */
- status =
- cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
+ status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
ADC_QGAIN_RES_TRM_CH1, 3, 7, 0x00);
- status =
- cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
+ status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
ADC_QGAIN_RES_TRM_CH2, 3, 7, 0x00);
- status =
- cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
+ status = cx231xx_reg_mask_write(dev, Colibri_DEVICE_ADDRESS, 8,
ADC_QGAIN_RES_TRM_CH3, 3, 7, 0x00);
/* dynamic element matching off */
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_DCSERVO_DEM_CH1, 2, 0x03, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_DCSERVO_DEM_CH2, 2, 0x03, 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_DCSERVO_DEM_CH3, 2, 0x03, 1);
return status;
value &= (!INPUT_SEL_MASK);
value |= (ch1_setting - 1) << 4;
value &= 0xff;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH1, 2, value, 1);
}
value &= (!INPUT_SEL_MASK);
value |= (ch2_setting - 1) << 4;
value &= 0xff;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH2, 2, value, 1);
}
- /* For ch3_setting, the value to put in the register is 7 less than the input number */
+ /* For ch3_setting, the value to put in the register is
+ 7 less than the input number */
if (ch3_setting != 0) {
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH3, 2, &value, 1);
value &= (!INPUT_SEL_MASK);
value |= (ch3_setting - 1) << 4;
value &= 0xff;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH3, 2, value, 1);
}
break;
}
- if ((mode != dev->colibri_mode)
- && (dev->video_input == CX231XX_VMUX_TELEVISION)) {
- status =
- cx231xx_colibri_adjust_ref_count(dev,
+ if ((mode != dev->colibri_mode) && (dev->video_input == CX231XX_VMUX_TELEVISION))
+ status = cx231xx_colibri_adjust_ref_count(dev,
CX231XX_VMUX_TELEVISION);
- }
dev->colibri_mode = mode;
if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
while (colibri_power_status != 0x18) {
- status =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- 0x18, 1);
- status =
- cx231xx_read_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ 0x18, 1);
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status,
+ 1);
if (status < 0)
break;
}
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00,
1);
} else if (avmode == POLARIS_AVMODE_DIGITAL) {
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x70,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x70,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x70,
1);
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2,
&colibri_power_status, 1);
colibri_power_status |= 0x07;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
SUP_BLK_PWRDN, 2,
colibri_power_status, 1);
} else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) {
while (colibri_power_status != 0x18) {
- status =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- 0x18, 1);
- status =
- cx231xx_read_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ 0x18, 1);
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status,
+ 1);
if (status < 0)
break;
}
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH1, 2, 0x00,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH2, 2, 0x00,
1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
ADC_PWRDN_CLAMP_CH3, 2, 0x00,
1);
} else {
default:
if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
while (colibri_power_status != 0x18) {
- status =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- 0x18, 1);
- status =
- cx231xx_read_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ 0x18, 1);
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status,
+ 1);
if (status < 0)
break;
}
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH1, 2, 0x40,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH2, 2, 0x40,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH3, 2, 0x00,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH1, 2,
+ 0x40, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH2, 2,
+ 0x40, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH3, 2,
+ 0x00, 1);
} else if (avmode == POLARIS_AVMODE_DIGITAL) {
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH1, 2, 0x70,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH2, 2, 0x70,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH3, 2, 0x70,
- 1);
-
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH1, 2,
+ 0x70, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH2, 2,
+ 0x70, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH3, 2,
+ 0x70, 1);
+
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status,
+ 1);
colibri_power_status |= 0x07;
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- colibri_power_status, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ colibri_power_status,
+ 1);
} else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) {
while (colibri_power_status != 0x18) {
- status =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- 0x18, 1);
- status =
- cx231xx_read_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- SUP_BLK_PWRDN, 2,
- &colibri_power_status,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ 0x18, 1);
+ status = cx231xx_read_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ SUP_BLK_PWRDN, 2,
+ &colibri_power_status,
+ 1);
if (status < 0)
break;
}
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH1, 2, 0x00,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH2, 2, 0x00,
- 1);
- status =
- cx231xx_write_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- ADC_PWRDN_CLAMP_CH3, 2, 0x40,
- 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH1, 2,
+ 0x00, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH2, 2,
+ 0x00, 1);
+ status = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ ADC_PWRDN_CLAMP_CH3, 2,
+ 0x40, 1);
} else {
cx231xx_info("Invalid AV mode input\n");
status = -1;
dev->video_input = video_input;
if (video_input == CX231XX_VMUX_TELEVISION) {
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH3, 2, &input_mode, 1);
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH3, 2, &ntf_mode,
1);
} else {
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_INPUT_CH1, 2, &input_mode, 1);
- status =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
ADC_NTF_PRECLMP_EN_CH1, 2, &ntf_mode,
1);
}
return status;
}
-/*************************************************************************************
- * V I D E O / A U D I O D E C O D E R C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * V I D E O / A U D I O D E C O D E R C O N T R O L functions *
+ ******************************************++**********************************/
int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input)
{
int status = 0;
case CX231XX_VMUX_SVIDEO:
if ((dev->current_pcb_config.type == USB_BUS_POWER) &&
(dev->power_mode != POLARIS_AVMODE_ENXTERNAL_AV)) {
- status = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ENXTERNAL_AV); /* External AV */
+ /* External AV */
+ status = cx231xx_set_power_mode(dev,
+ POLARIS_AVMODE_ENXTERNAL_AV);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
+ cx231xx_errdev("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
}
- status =
- cx231xx_set_decoder_video_input(dev, INPUT(input)->type,
- INPUT(input)->vmux);
+ status = cx231xx_set_decoder_video_input(dev,
+ INPUT(input)->type,
+ INPUT(input)->vmux);
break;
case CX231XX_VMUX_TELEVISION:
case CX231XX_VMUX_CABLE:
if ((dev->current_pcb_config.type == USB_BUS_POWER) &&
(dev->power_mode != POLARIS_AVMODE_ANALOGT_TV)) {
- status = cx231xx_set_power_mode(dev, POLARIS_AVMODE_ANALOGT_TV); /* Tuner */
+ /* Tuner */
+ status = cx231xx_set_power_mode(dev,
+ POLARIS_AVMODE_ANALOGT_TV);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
+ cx231xx_errdev("%s: cx231xx_set_power_mode : Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
}
}
- status =
- cx231xx_set_decoder_video_input(dev,
- CX231XX_VMUX_COMPOSITE1,
- INPUT(input)->vmux);
+ status = cx231xx_set_decoder_video_input(dev,
+ CX231XX_VMUX_COMPOSITE1,
+ INPUT(input)->vmux);
break;
default:
- cx231xx_errdev
- ("%s: cx231xx_set_power_mode : Unknown Input %d !\n",
+ cx231xx_errdev("%s: cx231xx_set_power_mode : Unknown Input %d !\n",
__func__, INPUT(input)->type);
break;
}
if (pin_type != dev->video_input) {
status = cx231xx_colibri_adjust_ref_count(dev, pin_type);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_colibri_adjust_ref_count :Failed to set Colibri input mux - errCode [%d]!\n",
+ cx231xx_errdev("%s: cx231xx_colibri_adjust_ref_count :Failed to set Colibri input mux - errCode [%d]!\n",
__func__, status);
return status;
}
/* call colibri block to set video inputs */
status = cx231xx_colibri_set_input_mux(dev, input);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_colibri_set_input_mux :Failed to set Colibri input mux - errCode [%d]!\n",
+ cx231xx_errdev("%s: cx231xx_colibri_set_input_mux :Failed to set Colibri input mux - errCode [%d]!\n",
__func__, status);
return status;
}
switch (pin_type) {
case CX231XX_VMUX_COMPOSITE1:
- {
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, &value, 4);
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, &value, 4);
+ value |= (0 << 13) | (1 << 4);
+ value &= ~(1 << 5);
+
+ value &= (~(0x1ff8000)); /* set [24:23] [22:15] to 0 */
+ value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, value, 4);
+
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, 2, &value, 4);
+ value |= (1 << 7);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, 2, value, 4);
+
+ /* Set vip 1.1 output mode */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1,
+ FLD_OUT_MODE,
+ OUT_MODE_VIP11);
+
+ /* Tell DIF object to go to baseband mode */
+ status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
+ if (status < 0) {
+ cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ __func__, status);
+ return status;
+ }
+
+ /* Read the DFE_CTRL1 register */
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2, &value, 4);
+
+ /* enable the VBI_GATE_EN */
+ value |= FLD_VBI_GATE_EN;
+
+ /* Enable the auto-VGA enable */
+ value |= FLD_VGA_AUTO_EN;
+
+ /* Write it back */
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2, value, 4);
+
+ /* Disable auto config of registers */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_ACFG_DIS,
+ cx231xx_set_field(FLD_ACFG_DIS, 1));
+
+ /* Set CVBS input mode */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_INPUT_MODE,
+ cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
+ break;
+ case CX231XX_VMUX_SVIDEO:
+ /* Disable the use of DIF */
+
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, &value, 4);
+
+ value &= (~(0x1ff8000)); /* set [24:23] [22:15] to 0 */
+ value |= 0x1000010; /* set FUNC_MODE[24:23] = 2
+ IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, value, 4);
+
+ /* Tell DIF object to go to baseband mode */
+ status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
+ if (status < 0) {
+ cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ __func__, status);
+ return status;
+ }
+
+ /* Read the DFE_CTRL1 register */
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2, &value, 4);
+
+ /* enable the VBI_GATE_EN */
+ value |= FLD_VBI_GATE_EN;
+
+ /* Enable the auto-VGA enable */
+ value |= FLD_VGA_AUTO_EN;
+
+ /* Write it back */
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2, value, 4);
+
+ /* Disable auto config of registers */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_ACFG_DIS,
+ cx231xx_set_field(FLD_ACFG_DIS, 1));
+
+ /* Set YC input mode */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL,
+ FLD_INPUT_MODE,
+ cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_YC_1));
+
+ /* Chroma to ADC2 */
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, &value, 4);
+ value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */
+
+ /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8)
+ This sets them to use video
+ rather than audio. Only one of the two will be in use. */
+ value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3);
+
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2, value, 4);
+
+ status = cx231xx_colibri_set_mode(dev, AFE_MODE_BASEBAND);
+ break;
+ case CX231XX_VMUX_TELEVISION:
+ case CX231XX_VMUX_CABLE:
+ default:
+ switch (dev->model) {
+ case CX231XX_BOARD_CNXT_RDE_250:
+ case CX231XX_BOARD_CNXT_RDU_250:
+ /* Disable the use of DIF */
+
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2,
+ &value, 4);
value |= (0 << 13) | (1 << 4);
value &= ~(1 << 5);
- value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
- value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, value, 4);
+ value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
+ value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2,
+ value, 4);
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, 2, &value, 4);
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, 2,
+ &value, 4);
value |= (1 << 7);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, 2, value, 4);
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, 2,
+ value, 4);
/* Set vip 1.1 output mode */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1,
- FLD_OUT_MODE,
- OUT_MODE_VIP11);
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, FLD_OUT_MODE,
+ OUT_MODE_VIP11);
- /* Tell DIF object to go to baseband mode */
- status =
- cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
+ /* Tell DIF object to go to baseband mode */
+ status = cx231xx_dif_set_standard(dev,
+ DIF_USE_BASEBAND);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
- __func__, status);
+ cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ __func__, status);
return status;
}
/* Read the DFE_CTRL1 register */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2, &value, 4);
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2,
+ &value, 4);
/* enable the VBI_GATE_EN */
value |= FLD_VBI_GATE_EN;
value |= FLD_VGA_AUTO_EN;
/* Write it back */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2, value, 4);
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2,
+ value, 4);
/* Disable auto config of registers */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL,
- FLD_ACFG_DIS,
- cx231xx_set_field
- (FLD_ACFG_DIS,
- 1));
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_ACFG_DIS,
+ cx231xx_set_field(FLD_ACFG_DIS, 1));
/* Set CVBS input mode */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL,
- FLD_INPUT_MODE,
- cx231xx_set_field
- (FLD_INPUT_MODE,
- INPUT_MODE_CVBS_0));
- }
- break;
- case CX231XX_VMUX_SVIDEO:
- {
- /* Disable the use of DIF */
-
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, &value, 4);
-
- value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
- value |= 0x1000010; /* set FUNC_MODE[24:23] = 2
- IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, value, 4);
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_INPUT_MODE,
+ cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
+ break;
+ default:
+ /* Enable the DIF for the tuner */
- /* Tell DIF object to go to baseband mode */
- status =
- cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
+ /* Reinitialize the DIF */
+ status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
- __func__, status);
+ cx231xx_errdev("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
+ __func__, status);
return status;
}
+ /* Make sure bypass is cleared */
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DIF_MISC_CTRL,
+ 2, &value, 4);
+
+ /* Clear the bypass bit */
+ value &= ~FLD_DIF_DIF_BYPASS;
+
+ /* Enable the use of the DIF block */
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DIF_MISC_CTRL,
+ 2, value, 4);
+
/* Read the DFE_CTRL1 register */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2, &value, 4);
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2,
+ &value, 4);
- /* enable the VBI_GATE_EN */
- value |= FLD_VBI_GATE_EN;
+ /* Disable the VBI_GATE_EN */
+ value &= ~FLD_VBI_GATE_EN;
- /* Enable the auto-VGA enable */
- value |= FLD_VGA_AUTO_EN;
+ /* Enable the auto-VGA enable, AGC, and
+ set the skip count to 2 */
+ value |= FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN | 0x00200000;
/* Write it back */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2, value, 4);
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2,
+ value, 4);
- /* Disable auto config of registers */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL,
- FLD_ACFG_DIS,
- cx231xx_set_field
- (FLD_ACFG_DIS,
- 1));
-
- /* Set YC input mode */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL,
- FLD_INPUT_MODE,
- cx231xx_set_field
- (FLD_INPUT_MODE,
- INPUT_MODE_YC_1));
-
- /* Chroma to ADC2 */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, &value, 4);
- value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */
+ /* Wait 15 ms */
+ msleep(1);
- /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8) This sets them to use video
- rather than audio. Only one of the two will be in use. */
- value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3);
+ /* Disable the auto-VGA enable AGC */
+ value &= ~(FLD_VGA_AUTO_EN);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2, value, 4);
+ /* Write it back */
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL1, 2,
+ value, 4);
- status =
- cx231xx_colibri_set_mode(dev, AFE_MODE_BASEBAND);
- }
- break;
- case CX231XX_VMUX_TELEVISION:
- case CX231XX_VMUX_CABLE:
- default:
- {
- switch (dev->model) {
- case CX231XX_BOARD_CNXT_RDE_250:
- case CX231XX_BOARD_CNXT_RDU_250:
- {
- /* Disable the use of DIF */
-
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2,
- &value, 4);
- value |= (0 << 13) | (1 << 4);
- value &= ~(1 << 5);
-
- value &= (~(0x1FF8000)); /* set [24:23] [22:15] to 0 */
- value |= 0x1000000; /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2,
- value, 4);
-
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, 2,
- &value, 4);
- value |= (1 << 7);
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, 2,
- value, 4);
-
- /* Set vip 1.1 output mode */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, FLD_OUT_MODE,
- OUT_MODE_VIP11);
-
- /* Tell DIF object to go to baseband mode */
- status =
- cx231xx_dif_set_standard(dev,
- DIF_USE_BASEBAND);
- if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
- __func__, status);
- return status;
- }
-
- /* Read the DFE_CTRL1 register */
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2,
- &value, 4);
-
- /* enable the VBI_GATE_EN */
- value |= FLD_VBI_GATE_EN;
-
- /* Enable the auto-VGA enable */
- value |= FLD_VGA_AUTO_EN;
-
- /* Write it back */
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2,
- value, 4);
-
- /* Disable auto config of registers */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL, FLD_ACFG_DIS,
- cx231xx_set_field(FLD_ACFG_DIS,
- 1));
-
- /* Set CVBS input mode */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL, FLD_INPUT_MODE,
- cx231xx_set_field(FLD_INPUT_MODE,
- INPUT_MODE_CVBS_0));
- }
- break;
- default:
- {
- /* Enable the DIF for the tuner */
-
- /* Reinitialize the DIF */
- status =
- cx231xx_dif_set_standard(dev,
- dev->norm);
- if (status < 0) {
- cx231xx_errdev
- ("%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
- __func__, status);
- return status;
- }
-
- /* Make sure bypass is cleared */
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DIF_MISC_CTRL,
- 2, &value, 4);
-
- /* Clear the bypass bit */
- value &= ~FLD_DIF_DIF_BYPASS;
-
- /* Enable the use of the DIF block */
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DIF_MISC_CTRL,
- 2, value, 4);
-
- /* Read the DFE_CTRL1 register */
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2,
- &value, 4);
-
- /* Disable the VBI_GATE_EN */
- value &= ~FLD_VBI_GATE_EN;
-
- /* Enable the auto-VGA enable, AGC, and set the skip count to 2 */
- value |=
- FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN |
- 0x00200000;
-
- /* Write it back */
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2,
- value, 4);
-
- /* Wait 15 ms */
- msleep(1);
-
- /* Disable the auto-VGA enable AGC */
- value &= ~(FLD_VGA_AUTO_EN);
-
- /* Write it back */
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- DFE_CTRL1, 2,
- value, 4);
-
- /* Enable Polaris B0 AGC output */
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- PIN_CTRL, 2,
- &value, 4);
- value |=
- (FLD_OEF_AGC_RF) |
- (FLD_OEF_AGC_IFVGA) |
- (FLD_OEF_AGC_IF);
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- PIN_CTRL, 2,
- value, 4);
-
- /* Set vip 1.1 output mode */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, FLD_OUT_MODE,
- OUT_MODE_VIP11);
-
- /* Disable auto config of registers */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL, FLD_ACFG_DIS,
- cx231xx_set_field(FLD_ACFG_DIS,
- 1));
-
- /* Set CVBS input mode */
- status =
- cx231xx_read_modify_write_i2c_dword
- (dev, HAMMERHEAD_I2C_ADDRESS,
- MODE_CTRL, FLD_INPUT_MODE,
- cx231xx_set_field(FLD_INPUT_MODE,
- INPUT_MODE_CVBS_0));
-
- /* Set some bits in AFE_CTRL so that channel 2 or 3 is ready to receive audio */
- /* Clear clamp for channels 2 and 3 (bit 16-17) */
- /* Clear droop comp (bit 19-20) */
- /* Set VGA_SEL (for audio control) (bit 7-8) */
- status =
- cx231xx_read_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2,
- &value, 4);
-
- value |=
- FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2;
-
- status =
- cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- AFE_CTRL, 2,
- value, 4);
- }
- break;
+ /* Enable Polaris B0 AGC output */
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ PIN_CTRL, 2,
+ &value, 4);
+ value |= (FLD_OEF_AGC_RF) |
+ (FLD_OEF_AGC_IFVGA) |
+ (FLD_OEF_AGC_IF);
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ PIN_CTRL, 2,
+ value, 4);
+
+ /* Set vip 1.1 output mode */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, FLD_OUT_MODE,
+ OUT_MODE_VIP11);
+
+ /* Disable auto config of registers */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_ACFG_DIS,
+ cx231xx_set_field(FLD_ACFG_DIS, 1));
+
+ /* Set CVBS input mode */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ MODE_CTRL, FLD_INPUT_MODE,
+ cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0));
+
+ /* Set some bits in AFE_CTRL so that channel 2 or 3 is ready to receive audio */
+ /* Clear clamp for channels 2 and 3 (bit 16-17) */
+ /* Clear droop comp (bit 19-20) */
+ /* Set VGA_SEL (for audio control) (bit 7-8) */
+ status = cx231xx_read_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2,
+ &value, 4);
+
+ value |= FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2;
+
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AFE_CTRL, 2,
+ value, 4);
+ break;
- }
}
break;
}
/* Set raw VBI mode */
- status =
- cx231xx_read_modify_write_i2c_dword(dev, HAMMERHEAD_I2C_ADDRESS,
- OUT_CTRL1, FLD_VBIHACTRAW_EN,
- cx231xx_set_field
- (FLD_VBIHACTRAW_EN, 1));
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, FLD_VBIHACTRAW_EN,
+ cx231xx_set_field(FLD_VBIHACTRAW_EN, 1));
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, OUT_CTRL1, 2,
- &value, 4);
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ OUT_CTRL1, 2,
+ &value, 4);
if (value & 0x02) {
value |= (1 << 19);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
OUT_CTRL1, 2, value, 4);
}
(unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, DFE_CTRL3, 2,
- 0xCD3F0280, 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ DFE_CTRL3, 2,
+ 0xCD3F0280, 4);
if (dev->norm & (V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_PAL_M)) {
cx231xx_info("do_mode_ctrl_overrides NTSC\n");
- /* Move the close caption lines out of active video, adjust the active video start point */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ /* Move the close caption lines out of active video,
+ adjust the active video start point */
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL,
FLD_VBLANK_CNT, 0x18);
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL,
FLD_VACTIVE_CNT,
0x1E6000);
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL,
FLD_V656BLANK_CNT,
0x1E000000);
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL,
FLD_HBLANK_CNT,
cx231xx_set_field
(FLD_HBLANK_CNT, 0x79));
- } else if (dev->
- norm & (V4L2_STD_PAL_B | V4L2_STD_PAL_G | V4L2_STD_PAL_D |
- V4L2_STD_PAL_I | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
+ } else if (dev->norm & (V4L2_STD_PAL_B | V4L2_STD_PAL_G |
+ V4L2_STD_PAL_D | V4L2_STD_PAL_I |
+ V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
cx231xx_info("do_mode_ctrl_overrides PAL\n");
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL,
FLD_VBLANK_CNT, 0x24);
/* Adjust the active video horizontal start point */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL,
FLD_HBLANK_CNT,
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
- } else if (dev->
- norm & (V4L2_STD_SECAM_B | V4L2_STD_SECAM_D |
- V4L2_STD_SECAM_G | V4L2_STD_SECAM_K |
- V4L2_STD_SECAM_K1 | V4L2_STD_SECAM_L |
- V4L2_STD_SECAM_LC)) {
+ } else if (dev->norm & (V4L2_STD_SECAM_B | V4L2_STD_SECAM_D |
+ V4L2_STD_SECAM_G | V4L2_STD_SECAM_K |
+ V4L2_STD_SECAM_K1 | V4L2_STD_SECAM_L |
+ V4L2_STD_SECAM_LC)) {
cx231xx_info("do_mode_ctrl_overrides SECAM\n");
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
VERT_TIM_CTRL,
FLD_VBLANK_CNT, 0x24);
/* Adjust the active video horizontal start point */
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
+ status = cx231xx_read_modify_write_i2c_dword(dev,
HAMMERHEAD_I2C_ADDRESS,
HORIZ_TIM_CTRL,
FLD_HBLANK_CNT,
u32 value = 0;
/* Put it in soft reset */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2,
- &gen_ctrl, 1);
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ GENERAL_CTL, 2, &gen_ctrl, 1);
gen_ctrl |= 1;
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2,
- gen_ctrl, 1);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ GENERAL_CTL, 2, gen_ctrl, 1);
switch (audio_input) {
case AUDIO_INPUT_LINE:
-
/* setup AUD_IO control from Merlin paralle output */
- value =
- cx231xx_set_field(FLD_AUD_CHAN1_SRC, AUD_CHAN_SRC_PARALLEL);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AUD_IO_CTRL, 2, value, 4);
+ value = cx231xx_set_field(FLD_AUD_CHAN1_SRC,
+ AUD_CHAN_SRC_PARALLEL);
+ status = cx231xx_write_i2c_data(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ AUD_IO_CTRL, 2, value, 4);
/* setup input to Merlin, SRC2 connect to AC97
bypass upsample-by-2, slave mode, sony mode, left justify
adr 091c, dat 01000000 */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, AC97_CTL,
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ AC97_CTL,
2, &dwval, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
AC97_CTL, 2,
(dwval | FLD_AC97_UP2X_BYPASS), 4);
/* select the parallel1 and SRC3 */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- BAND_OUT_SEL, 2,
- cx231xx_set_field(FLD_SRC3_IN_SEL,
- 0x0) |
- cx231xx_set_field(FLD_SRC3_CLK_SEL,
- 0x0) |
- cx231xx_set_field
- (FLD_PARALLEL1_SRC_SEL, 0x0), 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ BAND_OUT_SEL, 2,
+ cx231xx_set_field(FLD_SRC3_IN_SEL, 0x0) |
+ cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x0) |
+ cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x0),
+ 4);
/* unmute all, AC97 in, independence mode
adr 08d0, data 0x00063073 */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_CTL1, 2, 0x00063073, 4);
/* set AVC maximum threshold, adr 08d4, dat ffff0024 */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_VOL_CTL, 2, &dwval, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_VOL_CTL, 2,
(dwval | FLD_PATH1_AVC_THRESHOLD),
4);
/* set SC maximum threshold, adr 08ec, dat ffffb3a3 */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_SC_CTL, 2, &dwval, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_SC_CTL, 2,
(dwval | FLD_PATH1_SC_THRESHOLD), 4);
break;
default:
/* Setup SRC sources and clocks */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- BAND_OUT_SEL, 2,
- cx231xx_set_field(FLD_SRC6_IN_SEL,
- 0x00) |
- cx231xx_set_field(FLD_SRC6_CLK_SEL,
- 0x01) |
- cx231xx_set_field(FLD_SRC5_IN_SEL,
- 0x00) |
- cx231xx_set_field(FLD_SRC5_CLK_SEL,
- 0x02) |
- cx231xx_set_field(FLD_SRC4_IN_SEL,
- 0x02) |
- cx231xx_set_field(FLD_SRC4_CLK_SEL,
- 0x03) |
- cx231xx_set_field(FLD_SRC3_IN_SEL,
- 0x00) |
- cx231xx_set_field(FLD_SRC3_CLK_SEL,
- 0x00) |
- cx231xx_set_field
- (FLD_BASEBAND_BYPASS_CTL,
- 0x00) |
- cx231xx_set_field(FLD_AC97_SRC_SEL,
- 0x03) |
- cx231xx_set_field(FLD_I2S_SRC_SEL,
- 0x00) |
- cx231xx_set_field
- (FLD_PARALLEL2_SRC_SEL,
- 0x02) |
- cx231xx_set_field
- (FLD_PARALLEL1_SRC_SEL, 0x01), 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ BAND_OUT_SEL, 2,
+ cx231xx_set_field(FLD_SRC6_IN_SEL, 0x00) |
+ cx231xx_set_field(FLD_SRC6_CLK_SEL, 0x01) |
+ cx231xx_set_field(FLD_SRC5_IN_SEL, 0x00) |
+ cx231xx_set_field(FLD_SRC5_CLK_SEL, 0x02) |
+ cx231xx_set_field(FLD_SRC4_IN_SEL, 0x02) |
+ cx231xx_set_field(FLD_SRC4_CLK_SEL, 0x03) |
+ cx231xx_set_field(FLD_SRC3_IN_SEL, 0x00) |
+ cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x00) |
+ cx231xx_set_field(FLD_BASEBAND_BYPASS_CTL, 0x00) |
+ cx231xx_set_field(FLD_AC97_SRC_SEL, 0x03) |
+ cx231xx_set_field(FLD_I2S_SRC_SEL, 0x00) |
+ cx231xx_set_field(FLD_PARALLEL2_SRC_SEL, 0x02) |
+ cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x01), 4);
/* Setup the AUD_IO control */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- AUD_IO_CTRL, 2,
- cx231xx_set_field(FLD_I2S_PORT_DIR,
- 0x00) |
- cx231xx_set_field(FLD_I2S_OUT_SRC,
- 0x00) |
- cx231xx_set_field(FLD_AUD_CHAN3_SRC,
- 0x00) |
- cx231xx_set_field(FLD_AUD_CHAN2_SRC,
- 0x00) |
- cx231xx_set_field(FLD_AUD_CHAN1_SRC,
- 0x03), 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ AUD_IO_CTRL, 2,
+ cx231xx_set_field(FLD_I2S_PORT_DIR, 0x00) |
+ cx231xx_set_field(FLD_I2S_OUT_SRC, 0x00) |
+ cx231xx_set_field(FLD_AUD_CHAN3_SRC, 0x00) |
+ cx231xx_set_field(FLD_AUD_CHAN2_SRC, 0x00) |
+ cx231xx_set_field(FLD_AUD_CHAN1_SRC, 0x03), 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_CTL1, 2, 0x1F063870, 4);
/* setAudioStandard(_audio_standard); */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_CTL1, 2, 0x00063870, 4);
switch (dev->model) {
case CX231XX_BOARD_CNXT_RDE_250:
case CX231XX_BOARD_CNXT_RDU_250:
- status =
- cx231xx_read_modify_write_i2c_dword(dev,
- HAMMERHEAD_I2C_ADDRESS,
- CHIP_CTRL,
- FLD_SIF_EN,
- cx231xx_set_field
- (FLD_SIF_EN,
- 1));
+ status = cx231xx_read_modify_write_i2c_dword(dev,
+ HAMMERHEAD_I2C_ADDRESS,
+ CHIP_CTRL,
+ FLD_SIF_EN,
+ cx231xx_set_field(FLD_SIF_EN, 1));
break;
default:
break;
break;
case AUDIO_INPUT_MUTE:
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
PATH1_CTL1, 2, 0x1F011012, 4);
break;
}
/* Take it out of soft reset */
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2,
- &gen_ctrl, 1);
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ GENERAL_CTL, 2, &gen_ctrl, 1);
gen_ctrl &= ~1;
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, GENERAL_CTL, 2,
- gen_ctrl, 1);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ GENERAL_CTL, 2, gen_ctrl, 1);
return status;
}
get_scale(dev, width, height, &hscale, &vscale);
/* set horzontal scale */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, HSCALE_CTRL, 2,
- hscale, 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ HSCALE_CTRL, 2, hscale, 4);
/* set vertical scale */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, VSCALE_CTRL, 2,
- vscale, 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ VSCALE_CTRL, 2, vscale, 4);
return status;
}
-/*************************************************************************************
- * C H I P Specific C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * C H I P Specific C O N T R O L functions *
+ ******************************************************************************/
int cx231xx_init_ctrl_pin_status(struct cx231xx *dev)
{
u32 value;
int status = 0;
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2,
- &value, 4);
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL,
+ 2, &value, 4);
value |= (~dev->board.ctl_pin_status_mask);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL, 2,
- value, 4);
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS, PIN_CTRL,
+ 2, value, 4);
return status;
}
int status = 0;
/* first set the direction to output */
- status =
- cx231xx_set_gpio_direction(dev,
- dev->board.
- agc_analog_digital_select_gpio, 1);
+ status = cx231xx_set_gpio_direction(dev,
+ dev->board.
+ agc_analog_digital_select_gpio, 1);
/* 0 - demod ; 1 - Analog mode */
- status =
- cx231xx_set_gpio_value(dev,
+ status = cx231xx_set_gpio_value(dev,
dev->board.agc_analog_digital_select_gpio,
analog_or_digital);
cx231xx_info("Changing the i2c port for tuner to %d\n", I2CIndex);
- status =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
+ status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
+ PWR_CTL_EN, value, 4);
if (status < 0)
return status;
if (I2CIndex == I2C_1) {
if (value[0] & I2C_DEMOD_EN) {
value[0] &= ~I2C_DEMOD_EN;
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
PWR_CTL_EN, value, 4);
}
} else {
if (!(value[0] & I2C_DEMOD_EN)) {
value[0] |= I2C_DEMOD_EN;
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
PWR_CTL_EN, value, 4);
}
}
}
-/*************************************************************************************
- * D I F - B L O C K C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * D I F - B L O C K C O N T R O L functions *
+ ******************************************************************************/
int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode,
u32 function_mode, u32 standard)
{
if (mode == V4L2_TUNER_RADIO) {
/* C2HH */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF); /* IF_MODE */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF); /* IF_MODE */
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
} else {
switch (standard) {
case V4L2_STD_NTSC_M: /* 75 IRE Setup */
case V4L2_STD_PAL_M:
case V4L2_STD_PAL_N:
case V4L2_STD_PAL_Nc:
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb); /* IF_MODE */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AUD_IO_CTRL, 0, 31, 0x00000003); /* 0x124, AUD_CHAN1_SRC = 0x3 */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
+ function_mode); /* FUNC_MODE = DIF */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb); /* IF_MODE */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AUD_IO_CTRL, 0, 31, 0x00000003); /* 0x124, AUD_CHAN1_SRC = 0x3 */
break;
case V4L2_STD_PAL_B:
case V4L2_STD_PAL_G:
/* C2HH setup */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE); /* IF_MODE */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
+ function_mode); /* FUNC_MODE = DIF */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE); /* IF_MODE */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
break;
case V4L2_STD_PAL_D:
case V4L2_STD_SECAM_K:
case V4L2_STD_SECAM_K1:
/* C2HH setup */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); /* FUNC_MODE = DIF */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF); /* IF_MODE */
- status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32, AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); /* lo if big signal */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 23, 24,
+ function_mode); /* FUNC_MODE = DIF */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF); /* IF_MODE */
+ status = cx231xx_reg_mask_write(dev,
+ HAMMERHEAD_I2C_ADDRESS, 32,
+ AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); /* no inv */
break;
case DIF_USE_BASEBAND:
func_mode = 0x01;
}
- status =
- cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode,
+ status = cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode,
func_mode, standard);
if (standard == DIF_USE_BASEBAND) { /* base band */
-
- /* There is a different SRC_PHASE_INC value for baseband vs. DIF */
+ /* There is a different SRC_PHASE_INC value
+ for baseband vs. DIF */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0xDF7DF83,
4);
- status =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- DIF_MISC_CTRL, 2,
- &dif_misc_ctrl_value, 4);
+ status = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ DIF_MISC_CTRL, 2,
+ &dif_misc_ctrl_value, 4);
dif_misc_ctrl_value |= FLD_DIF_DIF_BYPASS;
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_MISC_CTRL, 2,
} else if (standard & (V4L2_STD_PAL_B | V4L2_STD_PAL_G)) {
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL3, 0, 31, 0x00008800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_INT_CURRENT, 0, 31,
0x26001700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_RF_CURRENT, 0, 31,
0x00002660);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VIDEO_AGC_CTRL, 0, 31,
0x72500800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VID_AUD_OVERRIDE, 0, 31,
0x27000100);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530EC);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_COMP_FLT_CTRL, 0, 31,
0x00A653A8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_PHASE_INC, 0, 31,
0x1befbf06);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_GAIN_CONTROL, 0, 31,
0x000035e8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |= 0x3a013F11;
} else if (standard & V4L2_STD_PAL_D) {
-
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL3, 0, 31, 0x00008800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_INT_CURRENT, 0, 31,
0x26001700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_RF_CURRENT, 0, 31,
0x00002660);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VIDEO_AGC_CTRL, 0, 31,
0x72500800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VID_AUD_OVERRIDE, 0, 31,
0x27000100);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AV_SEP_CTRL, 0, 31, 0x3F3934EA);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_COMP_FLT_CTRL, 0, 31,
0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_PHASE_INC, 0, 31,
0x1befbf06);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_GAIN_CONTROL, 0, 31,
0x000035e8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
} else if (standard & V4L2_STD_PAL_I) {
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL3, 0, 31, 0x00008800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_REF, 0, 31, 0x444C1380);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_IF, 0, 31, 0xDA302600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_INT, 0, 31, 0xDA261700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_RF, 0, 31, 0xDA262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_INT_CURRENT, 0, 31,
0x26001700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_RF_CURRENT, 0, 31,
0x00002660);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VIDEO_AGC_CTRL, 0, 31,
0x72500800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VID_AUD_OVERRIDE, 0, 31,
0x27000100);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AV_SEP_CTRL, 0, 31, 0x5F39A934);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_COMP_FLT_CTRL, 0, 31,
0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_PHASE_INC, 0, 31,
0x1befbf06);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_GAIN_CONTROL, 0, 31,
0x000035e8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
/* Save the Spec Inversion value */
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |= 0x3a033F11;
} else if (standard & V4L2_STD_PAL_M) {
-
/* improved Low Frequency Phase Noise */
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL, 2, 0xFF01FF0C, 4);
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL1, 2, 0xbd038c85,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL2, 2, 0x1db4640a, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL3, 2, 0x00008800, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, 0x444C1380, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_INT_CURRENT, 2,
0x26001700, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_RF_CURRENT, 2, 0x00002660,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VIDEO_AGC_CTRL, 2, 0x72500800,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VID_AUD_OVERRIDE, 2, 0x27000100,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AV_SEP_CTRL, 2, 0x012c405d, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_GAIN_CONTROL, 2, 0x000035e8,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SOFT_RST_CTRL_REVB, 2,
0x00000000, 4);
} else if (standard & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) {
/* improved Low Frequency Phase Noise */
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL, 2, 0xFF01FF0C, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL1, 2, 0xbd038c85, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL2, 2, 0x1db4640a, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL3, 2, 0x00008800, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, 0x444C1380, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_INT_CURRENT, 2,
0x26001700, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_RF_CURRENT, 2, 0x00002660,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VIDEO_AGC_CTRL, 2, 0x72500800,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VID_AUD_OVERRIDE, 2, 0x27000100,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AV_SEP_CTRL, 2, 0x012c405d, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_GAIN_CONTROL, 2, 0x000035e8,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SOFT_RST_CTRL_REVB, 2,
0x00000000, 4);
(V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G |
V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1)) {
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL3, 0, 31, 0x00008800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_REF, 0, 31, 0x888C0380);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_INT_CURRENT, 0, 31,
0x26001700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_RF_CURRENT, 0, 31,
0x00002660);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VID_AUD_OVERRIDE, 0, 31,
0x27000100);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_COMP_FLT_CTRL, 0, 31,
0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_PHASE_INC, 0, 31,
0x1befbf06);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_GAIN_CONTROL, 0, 31,
0x000035e8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VIDEO_AGC_CTRL, 0, 31,
0xf4000000);
} else if (standard & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) {
/* Is it SECAM_L1? */
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL, 0, 31, 0x6503bc0c);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL1, 0, 31, 0xbd038c85);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL2, 0, 31, 0x1db4640a);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_PLL_CTRL3, 0, 31, 0x00008800);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_REF, 0, 31, 0x888C0380);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_IF, 0, 31, 0xe0262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_INT, 0, 31, 0xc2171700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_CTRL_RF, 0, 31, 0xc2262600);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_IF_INT_CURRENT, 0, 31,
0x26001700);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AGC_RF_CURRENT, 0, 31,
0x00002660);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VID_AUD_OVERRIDE, 0, 31,
0x27000100);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_COMP_FLT_CTRL, 0, 31,
0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_PHASE_INC, 0, 31,
0x1befbf06);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_SRC_GAIN_CONTROL, 0, 31,
0x000035e8);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_RPT_VARIANCE, 0, 31, 0x00000000);
- status =
- cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
+ status = cx231xx_reg_mask_write(dev, HAMMERHEAD_I2C_ADDRESS, 32,
DIF_VIDEO_AGC_CTRL, 0, 31,
0xf2560000);
dif_misc_ctrl_value &= FLD_DIF_SPEC_INV;
dif_misc_ctrl_value |= 0x3a023F11;
- } else { /* V4L2_STD_NTSC_M (75 IRE Setup) Or V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */
+ } else {
+ /* V4L2_STD_NTSC_M (75 IRE Setup) Or
+ V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */
- /* For NTSC the centre frequency of video coming out of sidewinder is
- around 7.1MHz or 3.6MHz depending on the spectral inversion.
- so for a non spectrally inverted channel the pll freq word is 0x03420c49
+ /* For NTSC the centre frequency of video coming out of
+ sidewinder is around 7.1MHz or 3.6MHz depending on the
+ spectral inversion. so for a non spectrally inverted channel
+ the pll freq word is 0x03420c49
*/
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL, 2, 0x6503BC0C, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL1, 2, 0xBD038C85, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL2, 2, 0x1DB4640A, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_PLL_CTRL3, 2, 0x00008800, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, 0x444C0380, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_INT_CURRENT, 2,
0x26001700, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_RF_CURRENT, 2, 0x00002660,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VIDEO_AGC_CTRL, 2, 0x04000800,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_VID_AUD_OVERRIDE, 2, 0x27000100,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AV_SEP_CTRL, 2, 0x01296e1f, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_COMP_FLT_CTRL, 2, 0x009f50c1, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_PHASE_INC, 2, 0x1befbf06, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_SRC_GAIN_CONTROL, 2, 0x000035e8,
4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_CTRL_IF, 2, 0xC2262600, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_CTRL_INT, 2, 0xC2262600, 4);
- status =
- cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_CTRL_RF, 2, 0xC2262600, 4);
/* Save the Spec Inversion value */
AUD_SRC_SEL[19] should always be disabled */
dif_misc_ctrl_value &= ~FLD_DIF_AUD_SRC_SEL;
- /* It is still possible to get Set Standard calls even when we are in FM mode
+ /* It is still possible to get Set Standard calls even when we
+ are in FM mode.
This is done to override the value for FM. */
if (dev->active_mode == V4L2_TUNER_RADIO)
dif_misc_ctrl_value = 0x7a080000;
DIF_AGC_IF_REF, 2, &dwval, 4);
dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF);
- if (dev->
- norm & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_B | V4L2_STD_SECAM_D)) {
+ if (dev->norm & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_B |
+ V4L2_STD_SECAM_D))
dwval |= 0x88000000;
- } else {
+ else
dwval |= 0x44000000;
- }
status = cx231xx_write_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
DIF_AGC_IF_REF, 2, dwval, 4);
return status;
}
-/*************************************************************************************
- * F L A T I R O N - B L O C K C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * F L A T I R O N - B L O C K C O N T R O L functions *
+ ******************************************************************************/
int cx231xx_flatiron_initialize(struct cx231xx *dev)
{
int status = 0;
u32 value;
- status =
- cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS, CH_PWR_CTRL1, 1,
- &value, 1);
+ status = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
+ CH_PWR_CTRL1, 1, &value, 1);
/* enables clock to delta-sigma and decimation filter */
value |= 0x80;
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
u32 value = 0;
if (avmode != POLARIS_AVMODE_ENXTERNAL_AV) {
- status =
- cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
+ status = cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, &value, 1);
value |= 0xfe;
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
switch (audio_input) {
case CX231XX_AMUX_LINE_IN:
-
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
CH_PWR_CTRL2, 1, 0x00, 1);
status = cx231xx_write_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
return status;
}
-/*************************************************************************************
- * P O W E R C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * P O W E R C O N T R O L functions *
+ ******************************************************************************/
int cx231xx_set_power_mode(struct cx231xx *dev, AV_MODE mode)
{
u8 value[4] = { 0, 0, 0, 0 };
cx231xx_info(" setPowerMode::mode = %d\n", mode);
- status =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
+ status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value,
+ 4);
if (status < 0)
return status;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
- value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
tmp |= PWR_ISO_EN;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
- value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
dev->xc_fw_load_done = 0; /* reset state of xceive tuner */
break;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
- value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
if (!(tmp & PWR_TUNER_EN)) {
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
if (!(tmp & PWR_ISO_EN)) {
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
if ((dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
-
/* tuner path to channel 1 from port 3 */
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
break;
case POLARIS_AVMODE_DIGITAL:
-
if (!(tmp & PWR_TUNER_EN)) {
tmp |= (PWR_TUNER_EN);
value[0] = (u8) tmp;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
if (!(tmp & PWR_AV_EN)) {
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
if (!(tmp & PWR_ISO_EN)) {
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
- value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
if (!(tmp & PWR_DEMOD_EN)) {
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
- PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
if ((dev->model == CX231XX_BOARD_CNXT_RDE_250) ||
(dev->model == CX231XX_BOARD_CNXT_RDU_250)) {
-
/* tuner path to channel 1 from port 3 */
cx231xx_enable_i2c_for_tuner(dev, I2C_3);
msleep(PWR_SLEEP_INTERVAL);
- /* For power saving, only enable Pwr_resetout_n when digital TV is selected. */
+ /* For power saving, only enable Pwr_resetout_n
+ when digital TV is selected. */
if (mode == POLARIS_AVMODE_DIGITAL) {
tmp |= PWR_RESETOUT_EN;
value[0] = (u8) tmp;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
- value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER,
+ PWR_CTL_EN, value, 4);
msleep(PWR_SLEEP_INTERVAL);
}
/* update power control for flatiron */
status = cx231xx_flatiron_update_power_control(dev, mode);
- status =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
- cx231xx_info
- (" The data of PWR_CTL_EN register 0x74=0x%0x,0x%0x,0x%0x,0x%0x\n",
- value[0], value[1], value[2], value[3]);
+ status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value,
+ 4);
+ cx231xx_info(" The data of PWR_CTL_EN register 0x74=0x%0x,0x%0x,0x%0x,0x%0x\n",
+ value[0], value[1], value[2], value[3]);
return status;
}
u32 tmp = 0;
int status = 0;
- status =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 4);
+ status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
+ value, 4);
if (status > 0)
return status;
value[1] = (u8) (tmp >> 8);
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN, value, 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN,
+ value, 4);
return status;
}
-/*************************************************************************************
- * S T R E A M C O N T R O L functions *
- *************************************************************************************/
+/******************************************************************************
+ * S T R E A M C O N T R O L functions *
+ ******************************************************************************/
int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask)
{
u8 value[4] = { 0x0, 0x0, 0x0, 0x0 };
int status = 0;
cx231xx_info("cx231xx_start_stream():: ep_mask = %x\n", ep_mask);
- status =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
+ status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
+ value, 4);
if (status < 0)
return status;
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, value,
- 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET,
+ value, 4);
return status;
}
value[2] = (u8) (tmp >> 16);
value[3] = (u8) (tmp >> 24);
- status =
- cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, value,
- 4);
+ status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET,
+ value, 4);
return status;
}
if (start) {
rc = cx231xx_initialize_stream_xfer(dev, media_type);
- if (rc < 0) {
+ if (rc < 0)
return rc;
- }
/* enable video capture */
if (ep_mask > 0)
rc = cx231xx_stop_stream(dev, ep_mask);
}
- if (dev->mode == CX231XX_ANALOG_MODE) {
- /* do any in Analog mode */
- } else {
- /* do any in digital mode */
- }
return rc;
}
-
EXPORT_SYMBOL_GPL(cx231xx_capture_start);
-/************************************************************************************
-* G P I O B I T control functions *
-*************************************************************************************/
+/*****************************************************************************
+* G P I O B I T control functions *
+******************************************************************************/
int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u8 * gpio_val)
{
int status = 0;
u32 value = 0;
/* Check for valid pin_number - if 32 , bail out */
- if (pin_number >= 32) {
+ if (pin_number >= 32)
return -EINVAL;
- }
- if (pin_value == 0) { /* input */
+ /* input */
+ if (pin_value == 0)
value = dev->gpio_dir & (~(1 << pin_number)); /* clear */
- } else {
+ else
value = dev->gpio_dir | (1 << pin_number);
- }
- status = cx231xx_set_gpio_bit(dev, value, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, value, (u8 *) &dev->gpio_val);
/* cache the value for future */
dev->gpio_dir = value;
/* It was in input mode */
value = dev->gpio_dir | (1 << pin_number);
dev->gpio_dir = value;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *) &dev->gpio_val);
value = 0;
}
- if (pin_value == 0) {
+ if (pin_value == 0)
value = dev->gpio_val & (~(1 << pin_number));
- } else {
+ else
value = dev->gpio_val | (1 << pin_number);
- }
/* store the value */
dev->gpio_val = value;
/* toggle bit0 of GP_IO */
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
return status;
}
-/************************************************************************************
-* G P I O I2C related functions *
-*************************************************************************************/
+/*****************************************************************************
+* G P I O I2C related functions *
+******************************************************************************/
int cx231xx_gpio_i2c_start(struct cx231xx *dev)
{
int status = 0;
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
dev->gpio_val |= 1 << dev->board.tuner_sda_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
return status;
}
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
/* set SCL to input ,release SCL cable control
set SDA to input ,release SDA cable control */
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
- if (status < 0) {
+ cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
+ if (status < 0)
return -EINVAL;
- }
+
return status;
}
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* set SCL to output 1; set SDA to output 0 */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* set SCL to output 0; set SDA to output 0 */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
} else {
/* set SCL to output 0; set SDA to output 1 */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
dev->gpio_val |= 1 << dev->board.tuner_sda_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* set SCL to output 1; set SDA to output 1 */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* set SCL to output 0; set SDA to output 1 */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
}
}
return status;
/* set SCL to output 0; set SDA to input */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* set SCL to output 1; set SDA to input */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
/* get SDA data bit */
gpio_logic_value = dev->gpio_val;
- status =
- cx231xx_get_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
- if ((dev->gpio_val & (1 << dev->board.tuner_sda_gpio)) != 0) {
+ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
+ if ((dev->gpio_val & (1 << dev->board.tuner_sda_gpio)) != 0)
value |= (1 << (8 - i - 1));
- }
dev->gpio_val = gpio_logic_value;
}
/* set SCL to output 0,finish the read latest SCL signal.
- !!!set SDA to input,never to modify SDA direction at the same times */
+ !!!set SDA to input, never to modify SDA direction at
+ the same times */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* store the value */
*buf = value & 0xff;
int nCnt = 10;
int nInit = nCnt;
- /* clock stretch; set SCL to input; set SDA to input; get SCL value till SCL = 1 */
+ /* clock stretch; set SCL to input; set SDA to input;
+ get SCL value till SCL = 1 */
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio);
gpio_logic_value = dev->gpio_val;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
do {
msleep(2);
- status =
- cx231xx_get_gpio_bit(dev, dev->gpio_dir,
- (u8 *) & dev->gpio_val);
+ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir,
+ (u8 *)&dev->gpio_val);
nCnt--;
- } while (((dev->gpio_val & (1 << dev->board.tuner_scl_gpio)) == 0)
- && (nCnt > 0));
+ } while (((dev->gpio_val & (1 << dev->board.tuner_scl_gpio)) == 0) && (nCnt > 0));
- if (nCnt == 0) {
- cx231xx_info
- ("No ACK after %d msec for clock stretch. GPIO I2C operation failed!",
- nInit * 10);
- }
+ if (nCnt == 0)
+ cx231xx_info("No ACK after %d msec for clock stretch. GPIO I2C operation failed!",
+ nInit * 10);
/* readAck
- throuth clock stretch ,slave has given a SCL signal,so the SDA data can be directly read. */
- status =
- cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ throuth clock stretch ,slave has given a SCL signal,
+ so the SDA data can be directly read. */
+ status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) {
dev->gpio_val = gpio_logic_value;
dev->gpio_val |= (1 << dev->board.tuner_sda_gpio);
}
- /* read SDA end, set the SCL to output 0, after this operation, SDA direction can be changed. */
+ /* read SDA end, set the SCL to output 0, after this operation,
+ SDA direction can be changed. */
dev->gpio_val = gpio_logic_value;
dev->gpio_dir |= (1 << dev->board.tuner_scl_gpio);
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
return status;
}
/* set SDA to ouput */
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set SCL = 0 (output); set SDA = 0 (output) */
dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio);
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set SCL = 1 (output); set SDA = 0 (output) */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set SCL = 0 (output); set SDA = 0 (output) */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set SDA to input,and then the slave will read data from SDA. */
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
return status;
}
/* set scl to output ; set sda to input */
dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio;
dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set scl to output 0; set sda to input */
dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio);
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
/* set scl to output 1; set sda to input */
dev->gpio_val |= 1 << dev->board.tuner_scl_gpio;
- status =
- cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *) & dev->gpio_val);
+ status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
return status;
}
-/************************************************************************************
-* G P I O I2C related functions *
-*************************************************************************************/
+/*****************************************************************************
+* G P I O I2C related functions *
+******************************************************************************/
/* cx231xx_gpio_i2c_read
* Function to read data from gpio based I2C interface
*/
/*
- cx231xx-video.c - driver for Conexant Cx23100/101/102 USB video capture devices
+ cx231xx-video.c - driver for Conexant Cx23100/101/102
+ USB video capture devices
Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
Based on em28xx driver
static struct cx231xx_ctrl cx231xx_ctls[] = {
/* --- video --- */
{
- .v = {
- .id = V4L2_CID_BRIGHTNESS,
- .name = "Brightness",
- .minimum = 0x00,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x7f,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
- .off = 128,
- .reg = LUMA_CTRL,
- .mask = 0x00ff,
- .shift = 0,
- }, {
- .v = {
- .id = V4L2_CID_CONTRAST,
- .name = "Contrast",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x3f,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
- .off = 0,
- .reg = LUMA_CTRL,
- .mask = 0xff00,
- .shift = 8,
- }, {
- .v = {
- .id = V4L2_CID_HUE,
- .name = "Hue",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x7f,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
- .off = 128,
- .reg = CHROMA_CTRL,
- .mask = 0xff0000,
- .shift = 16,
- }, {
- /* strictly, this only describes only U saturation.
- * V saturation is handled specially through code.
- */
- .v = {
- .id = V4L2_CID_SATURATION,
- .name = "Saturation",
- .minimum = 0,
- .maximum = 0xff,
- .step = 1,
- .default_value = 0x7f,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
- .off = 0,
- .reg = CHROMA_CTRL,
- .mask = 0x00ff,
- .shift = 0,
- }, {
- /* --- audio --- */
- .v = {
- .id = V4L2_CID_AUDIO_MUTE,
- .name = "Mute",
- .minimum = 0,
- .maximum = 1,
- .default_value = 1,
- .type = V4L2_CTRL_TYPE_BOOLEAN,
- },
- .reg = PATH1_CTL1,
- .mask = (0x1f << 24),
- .shift = 24,
- }, {
- .v = {
- .id = V4L2_CID_AUDIO_VOLUME,
- .name = "Volume",
- .minimum = 0,
- .maximum = 0x3f,
- .step = 1,
- .default_value = 0x3f,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
- .reg = PATH1_VOL_CTL,
- .mask = 0xff,
- .shift = 0,
- }
+ .v = {
+ .id = V4L2_CID_BRIGHTNESS,
+ .name = "Brightness",
+ .minimum = 0x00,
+ .maximum = 0xff,
+ .step = 1,
+ .default_value = 0x7f,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+ .off = 128,
+ .reg = LUMA_CTRL,
+ .mask = 0x00ff,
+ .shift = 0,
+ }, {
+ .v = {
+ .id = V4L2_CID_CONTRAST,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ .default_value = 0x3f,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+ .off = 0,
+ .reg = LUMA_CTRL,
+ .mask = 0xff00,
+ .shift = 8,
+ }, {
+ .v = {
+ .id = V4L2_CID_HUE,
+ .name = "Hue",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ .default_value = 0x7f,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+ .off = 128,
+ .reg = CHROMA_CTRL,
+ .mask = 0xff0000,
+ .shift = 16,
+ }, {
+ /* strictly, this only describes only U saturation.
+ * V saturation is handled specially through code.
+ */
+ .v = {
+ .id = V4L2_CID_SATURATION,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 0xff,
+ .step = 1,
+ .default_value = 0x7f,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+ .off = 0,
+ .reg = CHROMA_CTRL,
+ .mask = 0x00ff,
+ .shift = 0,
+ }, {
+ /* --- audio --- */
+ .v = {
+ .id = V4L2_CID_AUDIO_MUTE,
+ .name = "Mute",
+ .minimum = 0,
+ .maximum = 1,
+ .default_value = 1,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ },
+ .reg = PATH1_CTL1,
+ .mask = (0x1f << 24),
+ .shift = 24,
+ }, {
+ .v = {
+ .id = V4L2_CID_AUDIO_VOLUME,
+ .name = "Volume",
+ .minimum = 0,
+ .maximum = 0x3f,
+ .step = 1,
+ .default_value = 0x3f,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ },
+ .reg = PATH1_VOL_CTL,
+ .mask = 0xff,
+ .shift = 0,
+ }
};
static const int CX231XX_CTLS = ARRAY_SIZE(cx231xx_ctls);
}
sav_eav &= 0xF0;
- /* Get the first line if we have some portion of an SAV/EAV from the last buffer
- or a partial line */
+ /* Get the first line if we have some portion of an SAV/EAV from
+ the last buffer or a partial line */
if (sav_eav) {
- bytes_parsed += cx231xx_get_video_line(dev, dma_q, sav_eav, /* SAV/EAV */
- p_buffer + bytes_parsed, /* p_buffer */
- buffer_size - bytes_parsed); /* buffer size */
+ bytes_parsed += cx231xx_get_video_line(dev, dma_q,
+ sav_eav, /* SAV/EAV */
+ p_buffer + bytes_parsed, /* p_buffer */
+ buffer_size - bytes_parsed); /* buffer size */
}
/* Now parse data that is completely in this buffer */
u32 bytes_used = 0;
sav_eav = cx231xx_find_next_SAV_EAV(p_buffer + bytes_parsed, /* p_buffer */
- buffer_size - bytes_parsed, /* buffer size */
- &bytes_used); /* Receives bytes used to get SAV/EAV */
+ buffer_size - bytes_parsed, /* buffer size */
+ &bytes_used); /* Receives bytes used to get SAV/EAV */
bytes_parsed += bytes_used;
sav_eav &= 0xF0;
if (sav_eav && (bytes_parsed < buffer_size)) {
- bytes_parsed += cx231xx_get_video_line(dev, dma_q, sav_eav, /* SAV/EAV */
- p_buffer + bytes_parsed, /* p_buffer */
- buffer_size - bytes_parsed); /* buffer size */
+ bytes_parsed += cx231xx_get_video_line(dev,
+ dma_q, sav_eav, /* SAV/EAV */
+ p_buffer + bytes_parsed, /* p_buffer */
+ buffer_size - bytes_parsed); /* buffer size */
}
}
- /* Save the last four bytes of the buffer so we can check the buffer boundary
- condition next time */
+ /* Save the last four bytes of the buffer so we can check the
+ buffer boundary condition next time */
memcpy(dma_q->partial_buf, p_buffer + buffer_size - 4, 4);
bytes_parsed = 0;
return rc;
}
-u8 cx231xx_find_boundary_SAV_EAV(u8 * p_buffer, u8 * partial_buf,
- u32 * p_bytes_used)
+u8 cx231xx_find_boundary_SAV_EAV(u8 *p_buffer, u8 *partial_buf,
+ u32 *p_bytes_used)
{
u32 bytes_used;
u8 boundary_bytes[8];
memcpy(boundary_bytes + 4, p_buffer, 4);
/* Check for the SAV/EAV in the boundary buffer */
- sav_eav =
- cx231xx_find_next_SAV_EAV((u8 *) & boundary_bytes, 8, &bytes_used);
+ sav_eav = cx231xx_find_next_SAV_EAV((u8 *)&boundary_bytes, 8,
+ &bytes_used);
if (sav_eav) {
/* found a boundary SAV/EAV. Updates the bytes used to reflect
return sav_eav;
}
-u8 cx231xx_find_next_SAV_EAV(u8 * p_buffer, u32 buffer_size, u32 * p_bytes_used)
+u8 cx231xx_find_next_SAV_EAV(u8 *p_buffer, u32 buffer_size, u32 *p_bytes_used)
{
u32 i;
u8 sav_eav = 0;
- /* Don't search if the buffer size is less than 4. It causes a page fault since
- buffer_size - 4 evaluates to a large number in that case. */
+ /*
+ * Don't search if the buffer size is less than 4. It causes a page
+ * fault since buffer_size - 4 evaluates to a large number in that
+ * case.
+ */
if (buffer_size < 4) {
*p_bytes_used = buffer_size;
return 0;
return 0;
}
-u32 cx231xx_get_video_line(struct cx231xx * dev,
- struct cx231xx_dmaqueue * dma_q, u8 sav_eav,
- u8 * p_buffer, u32 buffer_size)
+u32 cx231xx_get_video_line(struct cx231xx *dev,
+ struct cx231xx_dmaqueue *dma_q, u8 sav_eav,
+ u8 *p_buffer, u32 buffer_size)
{
u32 bytes_copied = 0;
int current_field = -1;
switch (sav_eav) {
case SAV_ACTIVE_VIDEO_FIELD1:
- /* looking for skipped line which occurred in PAL 720x480 mode. In this case,
- there will be no active data contained between the SAV and EAV */
- if ((buffer_size > 3) &&
- (p_buffer[0] == 0xFF) && (p_buffer[1] == 0x00)
- && (p_buffer[2] == 0x00)
- && ((p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1)
- || (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2)
- || (p_buffer[3] == EAV_VBLANK_FIELD1)
- || (p_buffer[3] == EAV_VBLANK_FIELD2)
- )
- ) {
+ /* looking for skipped line which occurred in PAL 720x480 mode.
+ In this case, there will be no active data contained
+ between the SAV and EAV */
+ if ((buffer_size > 3) && (p_buffer[0] == 0xFF) &&
+ (p_buffer[1] == 0x00) && (p_buffer[2] == 0x00) &&
+ ((p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1) ||
+ (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2) ||
+ (p_buffer[3] == EAV_VBLANK_FIELD1) ||
+ (p_buffer[3] == EAV_VBLANK_FIELD2)))
return bytes_copied;
- }
current_field = 1;
break;
case SAV_ACTIVE_VIDEO_FIELD2:
- /* looking for skipped line which occurred in PAL 720x480 mode. In this case,
- there will be no active data contained between the SAV and EAV */
- if ((buffer_size > 3) &&
- (p_buffer[0] == 0xFF) && (p_buffer[1] == 0x00)
- && (p_buffer[2] == 0x00)
- && ((p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1)
- || (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2)
- || (p_buffer[3] == EAV_VBLANK_FIELD1)
- || (p_buffer[3] == EAV_VBLANK_FIELD2)
- )
- ) {
+ /* looking for skipped line which occurred in PAL 720x480 mode.
+ In this case, there will be no active data contained between
+ the SAV and EAV */
+ if ((buffer_size > 3) && (p_buffer[0] == 0xFF) &&
+ (p_buffer[1] == 0x00) && (p_buffer[2] == 0x00) &&
+ ((p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD1) ||
+ (p_buffer[3] == EAV_ACTIVE_VIDEO_FIELD2) ||
+ (p_buffer[3] == EAV_VBLANK_FIELD1) ||
+ (p_buffer[3] == EAV_VBLANK_FIELD2)))
return bytes_copied;
- }
current_field = 2;
break;
}
dma_q->last_sav = sav_eav;
- bytes_copied =
- cx231xx_copy_video_line(dev, dma_q, p_buffer, buffer_size,
- current_field);
+ bytes_copied = cx231xx_copy_video_line(dev, dma_q, p_buffer,
+ buffer_size, current_field);
return bytes_copied;
}
-u32 cx231xx_copy_video_line(struct cx231xx * dev,
- struct cx231xx_dmaqueue * dma_q, u8 * p_line,
+u32 cx231xx_copy_video_line(struct cx231xx *dev,
+ struct cx231xx_dmaqueue *dma_q, u8 *p_line,
u32 length, int field_number)
{
u32 bytes_to_copy;
struct cx231xx_buffer *buf;
u32 _line_size = dev->width * 2;
- if (dma_q->current_field != field_number) {
+ if (dma_q->current_field != field_number)
cx231xx_reset_video_buffer(dev, dma_q);
- }
/* get the buffer pointer */
buf = dev->video_mode.isoc_ctl.buf;
if (dma_q->lines_completed >= dma_q->lines_per_field) {
dma_q->bytes_left_in_line -= bytes_to_copy;
- dma_q->is_partial_line =
- (dma_q->bytes_left_in_line == 0) ? 0 : 1;
+ dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0) ?
+ 0 : 1;
return 0;
}
have copied if we had a buffer. */
if (!buf) {
dma_q->bytes_left_in_line -= bytes_to_copy;
- dma_q->is_partial_line =
- (dma_q->bytes_left_in_line == 0) ? 0 : 1;
+ dma_q->is_partial_line = (dma_q->bytes_left_in_line == 0)
+ ? 0 : 1;
return bytes_to_copy;
}
dma_q->bytes_left_in_line -= bytes_to_copy;
if (dma_q->bytes_left_in_line == 0) {
-
dma_q->bytes_left_in_line = _line_size;
dma_q->lines_completed++;
dma_q->is_partial_line = 0;
if (cx231xx_is_buffer_done(dev, dma_q) && buf) {
-
buffer_filled(dev, dma_q, buf);
dma_q->pos = 0;
/* handle the switch from field 1 to field 2 */
if (dma_q->current_field == 1) {
- if (dma_q->lines_completed >= dma_q->lines_per_field) {
+ if (dma_q->lines_completed >= dma_q->lines_per_field)
dma_q->field1_done = 1;
- } else {
+ else
dma_q->field1_done = 0;
- }
}
buf = dev->video_mode.isoc_ctl.buf;
}
int cx231xx_do_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
- u8 * p_buffer, u32 bytes_to_copy)
+ u8 *p_buffer, u32 bytes_to_copy)
{
u8 *p_out_buffer = NULL;
u32 current_line_bytes_copied = 0;
/* bytes already completed in the current line */
startwrite += current_line_bytes_copied;
- lencopy =
- dma_q->bytes_left_in_line >
- bytes_to_copy ? bytes_to_copy : dma_q->bytes_left_in_line;
+ lencopy = dma_q->bytes_left_in_line > bytes_to_copy ?
+ bytes_to_copy : dma_q->bytes_left_in_line;
- if ((u8 *) (startwrite + lencopy) >
- (u8 *) (p_out_buffer + buf->vb.size)) {
+ if ((u8 *)(startwrite + lencopy) > (u8 *)(p_out_buffer + buf->vb.size))
return 0;
- }
/* The below copies the UYVY data straight into video buffer */
cx231xx_swab((u16 *) p_buffer, (u16 *) startwrite, (u16) lencopy);
return 0;
}
-void cx231xx_swab(u16 * from, u16 * to, u16 len)
+void cx231xx_swab(u16 *from, u16 *to, u16 len)
{
u16 i;
if (len <= 0)
return;
- for (i = 0; i < len / 2; i++) {
+ for (i = 0; i < len / 2; i++)
to[i] = (from[i] << 8) | (from[i] >> 8);
- }
}
u8 cx231xx_is_buffer_done(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q)
u8 buffer_complete = 0;
/* Dual field stream */
- buffer_complete =
- ((dma_q->current_field == 2) &&
- (dma_q->lines_completed >= dma_q->lines_per_field) &&
- dma_q->field1_done);
+ buffer_complete = ((dma_q->current_field == 2) &&
+ (dma_q->lines_completed >= dma_q->lines_per_field) &&
+ dma_q->field1_done);
return buffer_complete;
}
struct cx231xx *dev = fh->dev;
struct v4l2_frequency f;
- *size =
- (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
+ *size = (fh->dev->width * fh->dev->height * dev->format->depth + 7)>>3;
if (0 == *count)
*count = CX231XX_DEF_BUF;
struct cx231xx_fh *fh = vq->priv_data;
struct cx231xx *dev = fh->dev;
unsigned long flags = 0;
+
if (in_interrupt())
BUG();
int rc = 0, urb_init = 0;
/* The only currently supported format is 16 bits/pixel */
- buf->vb.size =
- (fh->dev->width * fh->dev->height * dev->format->depth + 7) >> 3;
-
+ buf->vb.size = (fh->dev->width * fh->dev->height * dev->format->depth
+ + 7) >> 3;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
return -EINVAL;
buf->vb.state = VIDEOBUF_PREPARED;
return 0;
- fail:
+fail:
free_buffer(vq, buf);
return rc;
}
static int res_check(struct cx231xx_fh *fh)
{
- return (fh->stream_on);
+ return fh->stream_on;
}
static void res_free(struct cx231xx_fh *fh)
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
mutex_unlock(&dev->lock);
+
return 0;
}
/* Set the correct alternate setting for this resolution */
cx231xx_resolution_set(dev);
- out:
+out:
mutex_unlock(&dev->lock);
return rc;
}
static const char *iname[] = {
[CX231XX_VMUX_COMPOSITE1] = "Composite1",
- [CX231XX_VMUX_SVIDEO] = "S-Video",
+ [CX231XX_VMUX_SVIDEO] = "S-Video",
[CX231XX_VMUX_TELEVISION] = "Television",
- [CX231XX_VMUX_CABLE] = "Cable TV",
- [CX231XX_VMUX_DVB] = "DVB",
- [CX231XX_VMUX_DEBUG] = "for debug only",
+ [CX231XX_VMUX_CABLE] = "Cable TV",
+ [CX231XX_VMUX_DVB] = "DVB",
+ [CX231XX_VMUX_DEBUG] = "for debug only",
};
static int vidioc_enum_input(struct file *file, void *priv,
dev->ctl_freq = f->frequency;
if (dev->tuner_type == TUNER_XC5000) {
- if (dev->cx231xx_set_analog_freq != NULL) {
+ if (dev->cx231xx_set_analog_freq != NULL)
dev->cx231xx_set_analog_freq(dev, f->frequency);
- }
} else {
- cx231xx_i2c_call_clients(&dev->i2c_bus[1], VIDIOC_S_FREQUENCY,
- f);
+ cx231xx_i2c_call_clients(&dev->i2c_bus[1],
+ VIDIOC_S_FREQUENCY, f);
}
mutex_unlock(&dev->lock);
case V4L2_CHIP_MATCH_HOST:
switch (reg->match.addr) {
case 0: /* Cx231xx - internal registers */
- ret =
- cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
- (u16) reg->reg, value, 4);
- reg->val =
- value[0] | value[1] << 8 | value[2] << 16 | value[3]
- << 24;
+ ret = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER,
+ (u16)reg->reg, value, 4);
+ reg->val = value[0] | value[1] << 8 |
+ value[2] << 16 | value[3] << 24;
break;
case 1: /* Colibri - read byte */
- ret =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- (u16) reg->reg, 2, &data, 1);
+ ret = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ (u16)reg->reg, 2, &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 14: /* Colibri - read dword */
- ret =
- cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
- (u16) reg->reg, 2, &data, 4);
+ ret = cx231xx_read_i2c_data(dev, Colibri_DEVICE_ADDRESS,
+ (u16)reg->reg, 2, &data, 4);
reg->val = le32_to_cpu(data);
break;
case 2: /* Hammerhead - read byte */
- ret =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- (u16) reg->reg, 2, &data, 1);
+ ret = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ (u16)reg->reg, 2, &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 24: /* Hammerhead - read dword */
- ret =
- cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
- (u16) reg->reg, 2, &data, 4);
+ ret = cx231xx_read_i2c_data(dev, HAMMERHEAD_I2C_ADDRESS,
+ (u16)reg->reg, 2, &data, 4);
reg->val = le32_to_cpu(data);
break;
case 3: /* flatiron - read byte */
- ret =
- cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
- (u16) reg->reg, 1, &data, 1);
+ ret = cx231xx_read_i2c_data(dev,
+ Flatrion_DEVICE_ADDRESS,
+ (u16)reg->reg, 1,
+ &data, 1);
reg->val = le32_to_cpu(data & 0xff);
break;
case 34: /* flatiron - read dword */
ret =
cx231xx_read_i2c_data(dev, Flatrion_DEVICE_ADDRESS,
- (u16) reg->reg, 1, &data, 4);
+ (u16)reg->reg, 1, &data, 4);
reg->val = le32_to_cpu(data);
break;
}
}
mutex_lock(&dev->lock);
-
cx231xx_i2c_call_clients(&dev->i2c_bus[0], VIDIOC_DBG_G_REGISTER, reg);
-
mutex_unlock(&dev->lock);
return ret;
data[1] = (u8) (value >> 8);
data[2] = (u8) (value >> 16);
data[3] = (u8) (value >> 24);
- ret =
- cx231xx_write_ctrl_reg(dev,
+ ret = cx231xx_write_ctrl_reg(dev,
VRT_SET_REGISTER,
- (u16) reg->reg, data,
+ (u16)reg->reg, data,
4);
break;
case 1: /* Colibri - read byte */
- ret =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- (u16) reg->reg, 2,
- value, 1);
+ ret = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ (u16)reg->reg, 2,
+ value, 1);
break;
case 14: /* Colibri - read dword */
- ret =
- cx231xx_write_i2c_data(dev,
- Colibri_DEVICE_ADDRESS,
- (u16) reg->reg, 2,
- value, 4);
+ ret = cx231xx_write_i2c_data(dev,
+ Colibri_DEVICE_ADDRESS,
+ (u16)reg->reg, 2,
+ value, 4);
break;
case 2: /* Hammerhead - read byte */
ret =
cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- (u16) reg->reg, 2,
- value, 1);
+ HAMMERHEAD_I2C_ADDRESS,
+ (u16)reg->reg, 2,
+ value, 1);
break;
case 24: /* Hammerhead - read dword */
ret =
cx231xx_write_i2c_data(dev,
- HAMMERHEAD_I2C_ADDRESS,
- (u16) reg->reg, 2,
- value, 4);
+ HAMMERHEAD_I2C_ADDRESS,
+ (u16)reg->reg, 2,
+ value, 4);
break;
case 3: /* flatiron - read byte */
ret =
cx231xx_write_i2c_data(dev,
- Flatrion_DEVICE_ADDRESS,
- (u16) reg->reg, 1,
- value, 1);
+ Flatrion_DEVICE_ADDRESS,
+ (u16)reg->reg, 1,
+ value, 1);
break;
case 34: /* flatiron - read dword */
ret =
cx231xx_write_i2c_data(dev,
- Flatrion_DEVICE_ADDRESS,
- (u16) reg->reg, 1,
- value, 4);
+ Flatrion_DEVICE_ADDRESS,
+ (u16)reg->reg, 1,
+ value, 4);
break;
}
}
if (rc < 0)
return rc;
- return (videobuf_reqbufs(&fh->vb_vidq, rb));
+ return videobuf_reqbufs(&fh->vb_vidq, rb);
}
static int vidioc_querybuf(struct file *file, void *priv, struct v4l2_buffer *b)
if (rc < 0)
return rc;
- return (videobuf_querybuf(&fh->vb_vidq, b));
+ return videobuf_querybuf(&fh->vb_vidq, b);
}
static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
if (rc < 0)
return rc;
- return (videobuf_qbuf(&fh->vb_vidq, b));
+ return videobuf_qbuf(&fh->vb_vidq, b);
}
static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
if (rc < 0)
return rc;
- return (videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK));
+ return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
}
#ifdef CONFIG_VIDEO_V4L1_COMPAT
dev->users++;
- if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
- videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_video_qops, NULL, &dev->video_mode.slock, fh->type, V4L2_FIELD_INTERLACED, /* V4L2_FIELD_SEQ_TB, */
+ if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_video_qops,
+ NULL, &dev->video_mode.slock,
+ fh->type, V4L2_FIELD_INTERLACED,
sizeof(struct cx231xx_buffer), fh);
- }
-
if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-
- /* Set the required alternate setting VBI interface works in Bulk mode only */
+ /* Set the required alternate setting VBI interface works in
+ Bulk mode only */
cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
- videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_vbi_qops, NULL, &dev->vbi_mode.slock, fh->type, V4L2_FIELD_SEQ_TB, /* V4L2_FIELD_INTERLACED, */
+ videobuf_queue_vmalloc_init(&fh->vb_vidq, &cx231xx_vbi_qops,
+ NULL, &dev->vbi_mode.slock,
+ fh->type, V4L2_FIELD_SEQ_TB,
sizeof(struct cx231xx_buffer), fh);
}
cx231xx_uninit_vbi_isoc(dev);
/* set alternate 0 */
- if (!dev->vbi_or_sliced_cc_mode) {
+ if (!dev->vbi_or_sliced_cc_mode)
cx231xx_set_alt_setting(dev, INDEX_VANC, 0);
- } else {
+ else
cx231xx_set_alt_setting(dev, INDEX_HANC, 0);
- }
kfree(fh);
dev->users--;
* will allocate buffers when called for the first time
*/
static ssize_t
-cx231xx_v4l2_read(struct file *filp, char __user * buf, size_t count,
- loff_t * pos)
+cx231xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *pos)
{
struct cx231xx_fh *fh = filp->private_data;
struct cx231xx *dev = fh->dev;
}
static const struct v4l2_file_operations cx231xx_v4l_fops = {
- .owner = THIS_MODULE,
- .open = cx231xx_v4l2_open,
+ .owner = THIS_MODULE,
+ .open = cx231xx_v4l2_open,
.release = cx231xx_v4l2_close,
- .read = cx231xx_v4l2_read,
- .poll = cx231xx_v4l2_poll,
- .mmap = cx231xx_v4l2_mmap,
- .ioctl = video_ioctl2,
+ .read = cx231xx_v4l2_read,
+ .poll = cx231xx_v4l2_poll,
+ .mmap = cx231xx_v4l2_mmap,
+ .ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops video_ioctl_ops = {
- .vidioc_querycap = vidioc_querycap,
- .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
- .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
- .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
- .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
- .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
- .vidioc_try_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
- .vidioc_s_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
- .vidioc_g_audio = vidioc_g_audio,
- .vidioc_s_audio = vidioc_s_audio,
- .vidioc_cropcap = vidioc_cropcap,
- .vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap,
+ .vidioc_querycap = vidioc_querycap,
+ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
+ .vidioc_g_fmt_vbi_cap = vidioc_g_fmt_vbi_cap,
+ .vidioc_try_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
+ .vidioc_s_fmt_vbi_cap = vidioc_try_fmt_vbi_cap,
+ .vidioc_g_audio = vidioc_g_audio,
+ .vidioc_s_audio = vidioc_s_audio,
+ .vidioc_cropcap = vidioc_cropcap,
+ .vidioc_g_fmt_sliced_vbi_cap = vidioc_g_fmt_sliced_vbi_cap,
.vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
- .vidioc_reqbufs = vidioc_reqbufs,
- .vidioc_querybuf = vidioc_querybuf,
- .vidioc_qbuf = vidioc_qbuf,
- .vidioc_dqbuf = vidioc_dqbuf,
- .vidioc_s_std = vidioc_s_std,
- .vidioc_g_std = vidioc_g_std,
- .vidioc_enum_input = vidioc_enum_input,
- .vidioc_g_input = vidioc_g_input,
- .vidioc_s_input = vidioc_s_input,
- .vidioc_queryctrl = vidioc_queryctrl,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
- .vidioc_streamon = vidioc_streamon,
- .vidioc_streamoff = vidioc_streamoff,
- .vidioc_g_tuner = vidioc_g_tuner,
- .vidioc_s_tuner = vidioc_s_tuner,
- .vidioc_g_frequency = vidioc_g_frequency,
- .vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_reqbufs = vidioc_reqbufs,
+ .vidioc_querybuf = vidioc_querybuf,
+ .vidioc_qbuf = vidioc_qbuf,
+ .vidioc_dqbuf = vidioc_dqbuf,
+ .vidioc_s_std = vidioc_s_std,
+ .vidioc_g_std = vidioc_g_std,
+ .vidioc_enum_input = vidioc_enum_input,
+ .vidioc_g_input = vidioc_g_input,
+ .vidioc_s_input = vidioc_s_input,
+ .vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_streamon = vidioc_streamon,
+ .vidioc_streamoff = vidioc_streamoff,
+ .vidioc_g_tuner = vidioc_g_tuner,
+ .vidioc_s_tuner = vidioc_s_tuner,
+ .vidioc_g_frequency = vidioc_g_frequency,
+ .vidioc_s_frequency = vidioc_s_frequency,
#ifdef CONFIG_VIDEO_ADV_DEBUG
- .vidioc_g_register = vidioc_g_register,
- .vidioc_s_register = vidioc_s_register,
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
#endif
#ifdef CONFIG_VIDEO_V4L1_COMPAT
- .vidiocgmbuf = vidiocgmbuf,
+ .vidiocgmbuf = vidiocgmbuf,
#endif
};
static struct video_device cx231xx_vbi_template;
static const struct video_device cx231xx_video_template = {
- .fops = &cx231xx_v4l_fops,
- .release = video_device_release,
- .ioctl_ops = &video_ioctl_ops,
- .minor = -1,
- .tvnorms = V4L2_STD_ALL,
+ .fops = &cx231xx_v4l_fops,
+ .release = video_device_release,
+ .ioctl_ops = &video_ioctl_ops,
+ .minor = -1,
+ .tvnorms = V4L2_STD_ALL,
.current_norm = V4L2_STD_PAL,
};
static const struct v4l2_file_operations radio_fops = {
- .owner = THIS_MODULE,
- .open = cx231xx_v4l2_open,
+ .owner = THIS_MODULE,
+ .open = cx231xx_v4l2_open,
.release = cx231xx_v4l2_close,
- .ioctl = video_ioctl2,
+ .ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
- .vidioc_querycap = radio_querycap,
- .vidioc_g_tuner = radio_g_tuner,
- .vidioc_enum_input = radio_enum_input,
- .vidioc_g_audio = radio_g_audio,
- .vidioc_s_tuner = radio_s_tuner,
- .vidioc_s_audio = radio_s_audio,
- .vidioc_s_input = radio_s_input,
- .vidioc_queryctrl = radio_queryctrl,
- .vidioc_g_ctrl = vidioc_g_ctrl,
- .vidioc_s_ctrl = vidioc_s_ctrl,
+ .vidioc_querycap = radio_querycap,
+ .vidioc_g_tuner = radio_g_tuner,
+ .vidioc_enum_input = radio_enum_input,
+ .vidioc_g_audio = radio_g_audio,
+ .vidioc_s_tuner = radio_s_tuner,
+ .vidioc_s_audio = radio_s_audio,
+ .vidioc_s_input = radio_s_input,
+ .vidioc_queryctrl = radio_queryctrl,
+ .vidioc_g_ctrl = vidioc_g_ctrl,
+ .vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
#ifdef CONFIG_VIDEO_ADV_DEBUG
- .vidioc_g_register = vidioc_g_register,
- .vidioc_s_register = vidioc_s_register,
+ .vidioc_g_register = vidioc_g_register,
+ .vidioc_s_register = vidioc_s_register,
#endif
};
static struct video_device cx231xx_radio_template = {
- .name = "cx231xx-radio",
- .fops = &radio_fops,
+ .name = "cx231xx-radio",
+ .fops = &radio_fops,
.ioctl_ops = &radio_ioctl_ops,
- .minor = -1,
+ .minor = -1,
};
/******************************** usb interface ******************************/
vfd = video_device_alloc();
if (NULL == vfd)
return NULL;
+
*vfd = *template;
vfd->minor = -1;
vfd->parent = &dev->udev->dev;
dev->name, dev->vbi_dev->num);
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
- dev->radio_dev =
- cx231xx_vdev_init(dev, &cx231xx_radio_template, "radio");
+ dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
+ "radio");
if (!dev->radio_dev) {
cx231xx_errdev("cannot allocate video_device.\n");
return -ENODEV;
projects / linux-2.6-omap-h63xx.git / commitdiff