]> pilppa.com Git - linux-2.6-omap-h63xx.git/commitdiff
Revert "PCI: PCIE ASPM support"
authorGreg Kroah-Hartman <gregkh@suse.de>
Sat, 2 Feb 2008 19:32:01 +0000 (11:32 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Sat, 2 Feb 2008 19:32:01 +0000 (11:32 -0800)
This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b.

It caused build errors on non-x86 platforms, config file confusion, and
even some boot errors on some x86-64 boxes.  All around, not quite ready
for prime-time :(

Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/pci/pci-sysfs.c
drivers/pci/pci.c
drivers/pci/pcie/Kconfig
drivers/pci/pcie/Makefile
drivers/pci/pcie/aspm.c [deleted file]
drivers/pci/probe.c
drivers/pci/remove.c
include/linux/aspm.h [deleted file]
include/linux/pci.h
include/linux/pci_regs.h

index abf4203304e405269dc111afbe19b02d1e14ff4d..8dcf1458aa2fafe6e0433efd1dfb515ce503271a 100644 (file)
@@ -21,7 +21,6 @@
 #include <linux/topology.h>
 #include <linux/mm.h>
 #include <linux/capability.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 static int sysfs_initialized;  /* = 0 */
@@ -651,8 +650,6 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
        if (pcibios_add_platform_entries(pdev))
                goto err_rom_file;
 
-       pcie_aspm_create_sysfs_dev_files(pdev);
-
        return 0;
 
 err_rom_file:
@@ -682,8 +679,6 @@ void pci_remove_sysfs_dev_files(struct pci_dev *pdev)
        if (!sysfs_initialized)
                return;
 
-       pcie_aspm_remove_sysfs_dev_files(pdev);
-
        if (pdev->cfg_size < 4096)
                sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr);
        else
index b3e9294e4a0ede470f1c537e4b48e5b77380a175..04aac77824681a10582f1382a1c06771d2c3179e 100644 (file)
@@ -18,7 +18,6 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 #include <linux/log2.h>
-#include <linux/aspm.h>
 #include <asm/dma.h>   /* isa_dma_bridge_buggy */
 #include "pci.h"
 
@@ -520,9 +519,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
        if (need_restore)
                pci_restore_bars(dev);
 
-       if (dev->bus->self)
-               pcie_aspm_pm_state_change(dev->bus->self);
-
        return 0;
 }
 
index 60104cf987966eb09f7cef369c680ad897b70408..287a9311716c66b98fd06e7a44a3dff43738f27f 100644 (file)
@@ -26,23 +26,3 @@ config HOTPLUG_PCI_PCIE
          When in doubt, say N.
 
 source "drivers/pci/pcie/aer/Kconfig"
-
-#
-# PCI Express ASPM
-#
-config PCIEASPM
-       bool "PCI Express ASPM support(Experimental)"
-       depends on PCI && EXPERIMENTAL
-       default y
-       help
-         This enables PCI Express ASPM (Active State Power Management) and
-         Clock Power Management. ASPM supports state L0/L0s/L1.
-
-         When in doubt, say N.
-config PCIEASPM_DEBUG
-       bool "Debug PCI Express ASPM"
-       depends on PCIEASPM
-       default n
-       help
-         This enables PCI Express ASPM debug support. It will add per-device
-         interface to control ASPM.
index 11f6bb1eae24b5816f37181fdbf6021add41099a..e00fb99acf44434934d05db3dc33959eeebd5650 100644 (file)
@@ -2,9 +2,6 @@
 # Makefile for PCI-Express PORT Driver
 #
 
-# Build PCI Express ASPM if needed
-obj-$(CONFIG_PCIEASPM)         += aspm.o
-
 pcieportdrv-y                  := portdrv_core.o portdrv_pci.o portdrv_bus.o
 
 obj-$(CONFIG_PCIEPORTBUS)      += pcieportdrv.o
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
deleted file mode 100644 (file)
index 1a5adeb..0000000
+++ /dev/null
@@ -1,802 +0,0 @@
-/*
- * File:       drivers/pci/pcie/aspm.c
- * Enabling PCIE link L0s/L1 state and Clock Power Management
- *
- * Copyright (C) 2007 Intel
- * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
- * Copyright (C) Shaohua Li (shaohua.li@intel.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/pci_regs.h>
-#include <linux/errno.h>
-#include <linux/pm.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/aspm.h>
-#include <acpi/acpi_bus.h>
-#include <linux/pci-acpi.h>
-#include "../pci.h"
-
-#ifdef MODULE_PARAM_PREFIX
-#undef MODULE_PARAM_PREFIX
-#endif
-#define MODULE_PARAM_PREFIX "pcie_aspm."
-
-struct endpoint_state {
-       unsigned int l0s_acceptable_latency;
-       unsigned int l1_acceptable_latency;
-};
-
-struct pcie_link_state {
-       struct list_head sibiling;
-       struct pci_dev *pdev;
-
-       /* ASPM state */
-       unsigned int support_state;
-       unsigned int enabled_state;
-       unsigned int bios_aspm_state;
-       /* upstream component */
-       unsigned int l0s_upper_latency;
-       unsigned int l1_upper_latency;
-       /* downstream component */
-       unsigned int l0s_down_latency;
-       unsigned int l1_down_latency;
-       /* Clock PM state*/
-       unsigned int clk_pm_capable;
-       unsigned int clk_pm_enabled;
-       unsigned int bios_clk_state;
-
-       /*
-        * A pcie downstream port only has one slot under it, so at most there
-        * are 8 functions
-        */
-       struct endpoint_state endpoints[8];
-};
-
-static int aspm_disabled;
-static DEFINE_MUTEX(aspm_lock);
-static LIST_HEAD(link_list);
-
-#define POLICY_DEFAULT 0       /* BIOS default setting */
-#define POLICY_PERFORMANCE 1   /* high performance */
-#define POLICY_POWERSAVE 2     /* high power saving */
-static int aspm_policy;
-static const char *policy_str[] = {
-       [POLICY_DEFAULT] = "default",
-       [POLICY_PERFORMANCE] = "performance",
-       [POLICY_POWERSAVE] = "powersave"
-};
-
-static int policy_to_aspm_state(struct pci_dev *pdev)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       switch (aspm_policy) {
-       case POLICY_PERFORMANCE:
-               /* Disable ASPM and Clock PM */
-               return 0;
-       case POLICY_POWERSAVE:
-               /* Enable ASPM L0s/L1 */
-               return PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-       case POLICY_DEFAULT:
-               return link_state->bios_aspm_state;
-       }
-       return 0;
-}
-
-static int policy_to_clkpm_state(struct pci_dev *pdev)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       switch (aspm_policy) {
-       case POLICY_PERFORMANCE:
-               /* Disable ASPM and Clock PM */
-               return 0;
-       case POLICY_POWERSAVE:
-               /* Disable Clock PM */
-               return 1;
-       case POLICY_DEFAULT:
-               return link_state->bios_clk_state;
-       }
-       return 0;
-}
-
-static void pcie_set_clock_pm(struct pci_dev *pdev, int enable)
-{
-       struct pci_dev *child_dev;
-       int pos;
-       u16 reg16;
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-               if (!pos)
-                       return;
-               pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
-               if (enable)
-                       reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
-               else
-                       reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
-               pci_write_config_word(child_dev, pos + PCI_EXP_LNKCTL, reg16);
-       }
-       link_state->clk_pm_enabled = !!enable;
-}
-
-static void pcie_check_clock_pm(struct pci_dev *pdev)
-{
-       int pos;
-       u32 reg32;
-       u16 reg16;
-       int capable = 1, enabled = 1;
-       struct pci_dev *child_dev;
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       /* All functions should have the same cap and state, take the worst */
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-               if (!pos)
-                       return;
-               pci_read_config_dword(child_dev, pos + PCI_EXP_LNKCAP, &reg32);
-               if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
-                       capable = 0;
-                       enabled = 0;
-                       break;
-               }
-               pci_read_config_word(child_dev, pos + PCI_EXP_LNKCTL, &reg16);
-               if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
-                       enabled = 0;
-       }
-       link_state->clk_pm_capable = capable;
-       link_state->clk_pm_enabled = enabled;
-       link_state->bios_clk_state = enabled;
-       pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-}
-
-/*
- * pcie_aspm_configure_common_clock: check if the 2 ends of a link
- *   could use common clock. If they are, configure them to use the
- *   common clock. That will reduce the ASPM state exit latency.
- */
-static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
-{
-       int pos, child_pos;
-       u16 reg16 = 0;
-       struct pci_dev *child_dev;
-       int same_clock = 1;
-
-       /*
-        * all functions of a slot should have the same Slot Clock
-        * Configuration, so just check one function
-        * */
-       child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-               bus_list);
-       BUG_ON(!child_dev->is_pcie);
-
-       /* Check downstream component if bit Slot Clock Configuration is 1 */
-       child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-       pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKSTA, &reg16);
-       if (!(reg16 & PCI_EXP_LNKSTA_SLC))
-               same_clock = 0;
-
-       /* Check upstream component if bit Slot Clock Configuration is 1 */
-       pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-       pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
-       if (!(reg16 & PCI_EXP_LNKSTA_SLC))
-               same_clock = 0;
-
-       /* Configure downstream component, all functions */
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-               pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-                       &reg16);
-               if (same_clock)
-                       reg16 |= PCI_EXP_LNKCTL_CCC;
-               else
-                       reg16 &= ~PCI_EXP_LNKCTL_CCC;
-               pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
-                       reg16);
-       }
-
-       /* Configure upstream component */
-       pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-       if (same_clock)
-               reg16 |= PCI_EXP_LNKCTL_CCC;
-       else
-               reg16 &= ~PCI_EXP_LNKCTL_CCC;
-       pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-
-       /* retrain link */
-       reg16 |= PCI_EXP_LNKCTL_RL;
-       pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-
-       /* Wait for link training end */
-       while (1) {
-               pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, &reg16);
-               if (!(reg16 & PCI_EXP_LNKSTA_LT))
-                       break;
-               cpu_relax();
-       }
-}
-
-/*
- * calc_L0S_latency: Convert L0s latency encoding to ns
- */
-static unsigned int calc_L0S_latency(unsigned int latency_encoding, int ac)
-{
-       unsigned int ns = 64;
-
-       if (latency_encoding == 0x7) {
-               if (ac)
-                       ns = -1U;
-               else
-                       ns = 5*1000; /* > 4us */
-       } else
-               ns *= (1 << latency_encoding);
-       return ns;
-}
-
-/*
- * calc_L1_latency: Convert L1 latency encoding to ns
- */
-static unsigned int calc_L1_latency(unsigned int latency_encoding, int ac)
-{
-       unsigned int ns = 1000;
-
-       if (latency_encoding == 0x7) {
-               if (ac)
-                       ns = -1U;
-               else
-                       ns = 65*1000; /* > 64us */
-       } else
-               ns *= (1 << latency_encoding);
-       return ns;
-}
-
-static void pcie_aspm_get_cap_device(struct pci_dev *pdev, u32 *state,
-       unsigned int *l0s, unsigned int *l1, unsigned int *enabled)
-{
-       int pos;
-       u16 reg16;
-       u32 reg32;
-       unsigned int latency;
-
-       pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-       pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &reg32);
-       *state = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
-       if (*state != PCIE_LINK_STATE_L0S &&
-               *state != (PCIE_LINK_STATE_L1|PCIE_LINK_STATE_L0S))
-               * state = 0;
-       if (*state == 0)
-               return;
-
-       latency = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
-       *l0s = calc_L0S_latency(latency, 0);
-       if (*state & PCIE_LINK_STATE_L1) {
-               latency = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
-               *l1 = calc_L1_latency(latency, 0);
-       }
-       pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-       *enabled = reg16 & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1);
-}
-
-static void pcie_aspm_cap_init(struct pci_dev *pdev)
-{
-       struct pci_dev *child_dev;
-       u32 state, tmp;
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       /* upstream component states */
-       pcie_aspm_get_cap_device(pdev, &link_state->support_state,
-               &link_state->l0s_upper_latency,
-               &link_state->l1_upper_latency,
-               &link_state->enabled_state);
-       /* downstream component states, all functions have the same setting */
-       child_dev = list_entry(pdev->subordinate->devices.next, struct pci_dev,
-               bus_list);
-       pcie_aspm_get_cap_device(child_dev, &state,
-               &link_state->l0s_down_latency,
-               &link_state->l1_down_latency,
-               &tmp);
-       link_state->support_state &= state;
-       if (!link_state->support_state)
-               return;
-       link_state->enabled_state &= link_state->support_state;
-       link_state->bios_aspm_state = link_state->enabled_state;
-
-       /* ENDPOINT states*/
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               int pos;
-               u32 reg32;
-               unsigned int latency;
-               struct endpoint_state *ep_state =
-                       &link_state->endpoints[PCI_FUNC(child_dev->devfn)];
-
-               if (child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-                       child_dev->pcie_type != PCI_EXP_TYPE_LEG_END)
-                       continue;
-
-               pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
-               pci_read_config_dword(child_dev, pos + PCI_EXP_DEVCAP, &reg32);
-               latency = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
-               latency = calc_L0S_latency(latency, 1);
-               ep_state->l0s_acceptable_latency = latency;
-               if (link_state->support_state & PCIE_LINK_STATE_L1) {
-                       latency = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
-                       latency = calc_L1_latency(latency, 1);
-                       ep_state->l1_acceptable_latency = latency;
-               }
-       }
-}
-
-static unsigned int __pcie_aspm_check_state_one(struct pci_dev *pdev,
-       unsigned int state)
-{
-       struct pci_dev *parent_dev, *tmp_dev;
-       unsigned int latency, l1_latency = 0;
-       struct pcie_link_state *link_state;
-       struct endpoint_state *ep_state;
-
-       parent_dev = pdev->bus->self;
-       link_state = parent_dev->link_state;
-       state &= link_state->support_state;
-       if (state == 0)
-               return 0;
-       ep_state = &link_state->endpoints[PCI_FUNC(pdev->devfn)];
-
-       /*
-        * Check latency for endpoint device.
-        * TBD: The latency from the endpoint to root complex vary per
-        * switch's upstream link state above the device. Here we just do a
-        * simple check which assumes all links above the device can be in L1
-        * state, that is we just consider the worst case. If switch's upstream
-        * link can't be put into L0S/L1, then our check is too strictly.
-        */
-       tmp_dev = pdev;
-       while (state & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) {
-               parent_dev = tmp_dev->bus->self;
-               link_state = parent_dev->link_state;
-               if (state & PCIE_LINK_STATE_L0S) {
-                       latency = max_t(unsigned int,
-                                       link_state->l0s_upper_latency,
-                                       link_state->l0s_down_latency);
-                       if (latency > ep_state->l0s_acceptable_latency)
-                               state &= ~PCIE_LINK_STATE_L0S;
-               }
-               if (state & PCIE_LINK_STATE_L1) {
-                       latency = max_t(unsigned int,
-                                       link_state->l1_upper_latency,
-                                       link_state->l1_down_latency);
-                       if (latency + l1_latency >
-                                       ep_state->l1_acceptable_latency)
-                               state &= ~PCIE_LINK_STATE_L1;
-               }
-               if (!parent_dev->bus->self) /* parent_dev is a root port */
-                       break;
-               else {
-                       /*
-                        * parent_dev is the downstream port of a switch, make
-                        * tmp_dev the upstream port of the switch
-                        */
-                       tmp_dev = parent_dev->bus->self;
-                       /*
-                        * every switch on the path to root complex need 1 more
-                        * microsecond for L1. Spec doesn't mention L0S.
-                        */
-                       if (state & PCIE_LINK_STATE_L1)
-                               l1_latency += 1000;
-               }
-       }
-       return state;
-}
-
-static unsigned int pcie_aspm_check_state(struct pci_dev *pdev,
-       unsigned int state)
-{
-       struct pci_dev *child_dev;
-
-       /* If no child, disable the link */
-       if (list_empty(&pdev->subordinate->devices))
-               return 0;
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-                       /*
-                        * If downstream component of a link is pci bridge, we
-                        * disable ASPM for now for the link
-                        * */
-                       state = 0;
-                       break;
-               }
-               if ((child_dev->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
-                       child_dev->pcie_type != PCI_EXP_TYPE_LEG_END))
-                       continue;
-               /* Device not in D0 doesn't need check latency */
-               if (child_dev->current_state == PCI_D1 ||
-                       child_dev->current_state == PCI_D2 ||
-                       child_dev->current_state == PCI_D3hot ||
-                       child_dev->current_state == PCI_D3cold)
-                       continue;
-               state = __pcie_aspm_check_state_one(child_dev, state);
-       }
-       return state;
-}
-
-static void __pcie_aspm_config_one_dev(struct pci_dev *pdev, unsigned int state)
-{
-       u16 reg16;
-       int pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-
-       pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &reg16);
-       reg16 &= ~0x3;
-       reg16 |= state;
-       pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-}
-
-static void __pcie_aspm_config_link(struct pci_dev *pdev, unsigned int state)
-{
-       struct pci_dev *child_dev;
-       int valid = 1;
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       /*
-        * if the downstream component has pci bridge function, don't do ASPM
-        * now
-        */
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
-               if (child_dev->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
-                       valid = 0;
-                       break;
-               }
-       }
-       if (!valid)
-               return;
-
-       /*
-        * spec 2.0 suggests all functions should be configured the same
-        * setting for ASPM. Enabling ASPM L1 should be done in upstream
-        * component first and then downstream, and vice versa for disabling
-        * ASPM L1. Spec doesn't mention L0S.
-        */
-       if (state & PCIE_LINK_STATE_L1)
-               __pcie_aspm_config_one_dev(pdev, state);
-
-       list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list)
-               __pcie_aspm_config_one_dev(child_dev, state);
-
-       if (!(state & PCIE_LINK_STATE_L1))
-               __pcie_aspm_config_one_dev(pdev, state);
-
-       link_state->enabled_state = state;
-}
-
-static void __pcie_aspm_configure_link_state(struct pci_dev *pdev,
-       unsigned int state)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       if (link_state->support_state == 0)
-               return;
-       state &= PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1;
-
-       /* state 0 means disabling aspm */
-       state = pcie_aspm_check_state(pdev, state);
-       if (link_state->enabled_state == state)
-               return;
-       __pcie_aspm_config_link(pdev, state);
-}
-
-/*
- * pcie_aspm_configure_link_state: enable/disable PCI express link state
- * @pdev: the root port or switch downstream port
- */
-static void pcie_aspm_configure_link_state(struct pci_dev *pdev,
-       unsigned int state)
-{
-       down_read(&pci_bus_sem);
-       mutex_lock(&aspm_lock);
-       __pcie_aspm_configure_link_state(pdev, state);
-       mutex_unlock(&aspm_lock);
-       up_read(&pci_bus_sem);
-}
-
-static void free_link_state(struct pci_dev *pdev)
-{
-       kfree(pdev->link_state);
-       pdev->link_state = NULL;
-}
-
-/*
- * pcie_aspm_init_link_state: Initiate PCI express link state.
- * It is called after the pcie and its children devices are scaned.
- * @pdev: the root port or switch downstream port
- */
-void pcie_aspm_init_link_state(struct pci_dev *pdev)
-{
-       unsigned int state;
-       struct pcie_link_state *link_state;
-       int error = 0;
-
-       if (aspm_disabled || !pdev->is_pcie || pdev->link_state)
-               return;
-       if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-               pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-               return;
-       down_read(&pci_bus_sem);
-       if (list_empty(&pdev->subordinate->devices))
-               goto out;
-
-       mutex_lock(&aspm_lock);
-
-       link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
-       if (!link_state)
-               goto unlock_out;
-       pdev->link_state = link_state;
-
-       pcie_aspm_configure_common_clock(pdev);
-
-       pcie_aspm_cap_init(pdev);
-
-       /* config link state to avoid BIOS error */
-       state = pcie_aspm_check_state(pdev, policy_to_aspm_state(pdev));
-       __pcie_aspm_config_link(pdev, state);
-
-       pcie_check_clock_pm(pdev);
-
-       link_state->pdev = pdev;
-       list_add(&link_state->sibiling, &link_list);
-
-unlock_out:
-       if (error)
-               free_link_state(pdev);
-       mutex_unlock(&aspm_lock);
-out:
-       up_read(&pci_bus_sem);
-}
-
-/* @pdev: the endpoint device */
-void pcie_aspm_exit_link_state(struct pci_dev *pdev)
-{
-       struct pci_dev *parent = pdev->bus->self;
-       struct pcie_link_state *link_state = parent->link_state;
-
-       if (aspm_disabled || !pdev->is_pcie || !parent || !link_state)
-               return;
-       if (parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-               parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-               return;
-       down_read(&pci_bus_sem);
-       mutex_lock(&aspm_lock);
-
-       /*
-        * All PCIe functions are in one slot, remove one function will remove
-        * the the whole slot, so just wait
-        */
-       if (!list_empty(&parent->subordinate->devices))
-               goto out;
-
-       /* All functions are removed, so just disable ASPM for the link */
-       __pcie_aspm_config_one_dev(parent, 0);
-       list_del(&link_state->sibiling);
-       /* Clock PM is for endpoint device */
-
-       free_link_state(parent);
-out:
-       mutex_unlock(&aspm_lock);
-       up_read(&pci_bus_sem);
-}
-
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       if (aspm_disabled || !pdev->is_pcie || !pdev->link_state)
-               return;
-       if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-               pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
-               return;
-       /*
-        * devices changed PM state, we should recheck if latency meets all
-        * functions' requirement
-        */
-       pcie_aspm_configure_link_state(pdev, link_state->enabled_state);
-}
-
-/*
- * pci_disable_link_state - disable pci device's link state, so the link will
- * never enter specific states
- */
-void pci_disable_link_state(struct pci_dev *pdev, int state)
-{
-       struct pci_dev *parent = pdev->bus->self;
-       struct pcie_link_state *link_state;
-
-       if (aspm_disabled || !pdev->is_pcie)
-               return;
-       if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
-           pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
-               parent = pdev;
-       if (!parent)
-               return;
-
-       down_read(&pci_bus_sem);
-       mutex_lock(&aspm_lock);
-       link_state = parent->link_state;
-       link_state->support_state &=
-               ~(state & (PCIE_LINK_STATE_L0S|PCIE_LINK_STATE_L1));
-       if (state & PCIE_LINK_STATE_CLKPM)
-               link_state->clk_pm_capable = 0;
-
-       __pcie_aspm_configure_link_state(parent, link_state->enabled_state);
-       if (!link_state->clk_pm_capable && link_state->clk_pm_enabled)
-               pcie_set_clock_pm(parent, 0);
-       mutex_unlock(&aspm_lock);
-       up_read(&pci_bus_sem);
-}
-EXPORT_SYMBOL(pci_disable_link_state);
-
-static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
-{
-       int i;
-       struct pci_dev *pdev;
-       struct pcie_link_state *link_state;
-
-       for (i = 0; i < ARRAY_SIZE(policy_str); i++)
-               if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
-                       break;
-       if (i >= ARRAY_SIZE(policy_str))
-               return -EINVAL;
-       if (i == aspm_policy)
-               return 0;
-
-       down_read(&pci_bus_sem);
-       mutex_lock(&aspm_lock);
-       aspm_policy = i;
-       list_for_each_entry(link_state, &link_list, sibiling) {
-               pdev = link_state->pdev;
-               __pcie_aspm_configure_link_state(pdev,
-                       policy_to_aspm_state(pdev));
-               if (link_state->clk_pm_capable &&
-                   link_state->clk_pm_enabled != policy_to_clkpm_state(pdev))
-                       pcie_set_clock_pm(pdev, policy_to_clkpm_state(pdev));
-
-       }
-       mutex_unlock(&aspm_lock);
-       up_read(&pci_bus_sem);
-       return 0;
-}
-
-static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
-{
-       int i, cnt = 0;
-       for (i = 0; i < ARRAY_SIZE(policy_str); i++)
-               if (i == aspm_policy)
-                       cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
-               else
-                       cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
-       return cnt;
-}
-
-module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
-       NULL, 0644);
-
-#ifdef CONFIG_PCIEASPM_DEBUG
-static ssize_t link_state_show(struct device *dev,
-               struct device_attribute *attr,
-               char *buf)
-{
-       struct pci_dev *pci_device = to_pci_dev(dev);
-       struct pcie_link_state *link_state = pci_device->link_state;
-
-       return sprintf(buf, "%d\n", link_state->enabled_state);
-}
-
-static ssize_t link_state_store(struct device *dev,
-               struct device_attribute *attr,
-               const char *buf,
-               size_t n)
-{
-       struct pci_dev *pci_device = to_pci_dev(dev);
-       int state;
-
-       if (n < 1)
-               return -EINVAL;
-       state = buf[0]-'0';
-       if (state >= 0 && state <= 3) {
-               /* setup link aspm state */
-               pcie_aspm_configure_link_state(pci_device, state);
-               return n;
-       }
-
-       return -EINVAL;
-}
-
-static ssize_t clk_ctl_show(struct device *dev,
-               struct device_attribute *attr,
-               char *buf)
-{
-       struct pci_dev *pci_device = to_pci_dev(dev);
-       struct pcie_link_state *link_state = pci_device->link_state;
-
-       return sprintf(buf, "%d\n", link_state->clk_pm_enabled);
-}
-
-static ssize_t clk_ctl_store(struct device *dev,
-               struct device_attribute *attr,
-               const char *buf,
-               size_t n)
-{
-       struct pci_dev *pci_device = to_pci_dev(dev);
-       int state;
-
-       if (n < 1)
-               return -EINVAL;
-       state = buf[0]-'0';
-
-       down_read(&pci_bus_sem);
-       mutex_lock(&aspm_lock);
-       pcie_set_clock_pm(pci_device, !!state);
-       mutex_unlock(&aspm_lock);
-       up_read(&pci_bus_sem);
-
-       return n;
-}
-
-static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store);
-static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store);
-
-static char power_group[] = "power";
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-               pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
-               return;
-
-       if (link_state->support_state)
-               sysfs_add_file_to_group(&pdev->dev.kobj,
-                       &dev_attr_link_state.attr, power_group);
-       if (link_state->clk_pm_capable)
-               sysfs_add_file_to_group(&pdev->dev.kobj,
-                       &dev_attr_clk_ctl.attr, power_group);
-}
-
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
-{
-       struct pcie_link_state *link_state = pdev->link_state;
-
-       if (!pdev->is_pcie || (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
-               pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
-               return;
-
-       if (link_state->support_state)
-               sysfs_remove_file_from_group(&pdev->dev.kobj,
-                       &dev_attr_link_state.attr, power_group);
-       if (link_state->clk_pm_capable)
-               sysfs_remove_file_from_group(&pdev->dev.kobj,
-                       &dev_attr_clk_ctl.attr, power_group);
-}
-#endif
-
-static int __init pcie_aspm_disable(char *str)
-{
-       aspm_disabled = 1;
-       return 1;
-}
-
-__setup("pcie_noaspm", pcie_aspm_disable);
-
-static int __init pcie_aspm_init(void)
-{
-       if (aspm_disabled)
-               return 0;
-       pci_osc_support_set(OSC_ACTIVE_STATE_PWR_SUPPORT|
-               OSC_CLOCK_PWR_CAPABILITY_SUPPORT);
-       return 0;
-}
-
-fs_initcall(pcie_aspm_init);
index 8b505bd925aa31895df3eafd4c47cb40b5d24bc3..34fa0397b55d63fa40010a901b4ff708741d1fee 100644 (file)
@@ -9,7 +9,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 #define CARDBUS_LATENCY_TIMER  176     /* secondary latency timer */
@@ -1002,10 +1001,6 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
                                break;
                }
        }
-
-       if (bus->self)
-               pcie_aspm_init_link_state(bus->self);
-
        return nr;
 }
 
index ec4a82ba29a8d04b6739462e846395388cace68d..9684e1bde277a1e012fae641363178f394071323 100644 (file)
@@ -1,6 +1,5 @@
 #include <linux/pci.h>
 #include <linux/module.h>
-#include <linux/aspm.h>
 #include "pci.h"
 
 static void pci_free_resources(struct pci_dev *dev)
@@ -31,9 +30,6 @@ static void pci_stop_dev(struct pci_dev *dev)
                dev->global_list.next = dev->global_list.prev = NULL;
                up_write(&pci_bus_sem);
        }
-
-       if (dev->bus->self)
-               pcie_aspm_exit_link_state(dev);
 }
 
 static void pci_destroy_dev(struct pci_dev *dev)
diff --git a/include/linux/aspm.h b/include/linux/aspm.h
deleted file mode 100644 (file)
index f41a698..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *     aspm.h
- *
- *     PCI Express ASPM defines and function prototypes
- *
- *     Copyright (C) 2007 Intel Corp.
- *             Zhang Yanmin (yanmin.zhang@intel.com)
- *             Shaohua Li (shaohua.li@intel.com)
- *
- *     For more information, please consult the following manuals (look at
- *     http://www.pcisig.com/ for how to get them):
- *
- *     PCI Express Specification
- */
-
-#ifndef LINUX_ASPM_H
-#define LINUX_ASPM_H
-
-#include <linux/pci.h>
-
-#define PCIE_LINK_STATE_L0S    1
-#define PCIE_LINK_STATE_L1     2
-#define PCIE_LINK_STATE_CLKPM  4
-
-#ifdef CONFIG_PCIEASPM
-extern void pcie_aspm_init_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-extern void pcie_aspm_pm_state_change(struct pci_dev *pdev);
-extern void pci_disable_link_state(struct pci_dev *pdev, int state);
-#else
-#define pcie_aspm_init_link_state(pdev)                do {} while (0)
-#define pcie_aspm_exit_link_state(pdev)                do {} while (0)
-#define pcie_aspm_pm_state_change(pdev)                do {} while (0)
-#define pci_disable_link_state(pdev, state)    do {} while (0)
-#endif
-
-#ifdef CONFIG_PCIEASPM_DEBUG /* this depends on CONFIG_PCIEASPM */
-extern void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
-extern void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
-#else
-#define pcie_aspm_create_sysfs_dev_files(pdev) do {} while (0)
-#define pcie_aspm_remove_sysfs_dev_files(pdev) do {} while (0)
-#endif
-#endif /* LINUX_ASPM_H */
index 4f96f1d94ac4cf6c30d6660534c5b41a6f2fbee1..cee75c0ff6e7b8631b80c0edb0a428428c5d5f5d 100644 (file)
@@ -128,7 +128,6 @@ struct pci_cap_saved_state {
        u32 data[0];
 };
 
-struct pcie_link_state;
 /*
  * The pci_dev structure is used to describe PCI devices.
  */
@@ -164,10 +163,6 @@ struct pci_dev {
                                           this is D0-D3, D0 being fully functional,
                                           and D3 being off. */
 
-#ifdef CONFIG_PCIEASPM
-       struct pcie_link_state  *link_state;    /* ASPM link state. */
-#endif
-
        pci_channel_state_t error_state;        /* current connectivity state */
        struct  device  dev;            /* Generic device interface */
 
index c0c1223c91945111ca4ebbfe8d022de8461ab0ad..c1914a8b94a975fa5360722536b49a3746c29028 100644 (file)
 #define  PCI_EXP_DEVSTA_AUXPD  0x10    /* AUX Power Detected */
 #define  PCI_EXP_DEVSTA_TRPND  0x20    /* Transactions Pending */
 #define PCI_EXP_LNKCAP         12      /* Link Capabilities */
-#define  PCI_EXP_LNKCAP_ASPMS  0xc00   /* ASPM Support */
-#define  PCI_EXP_LNKCAP_L0SEL  0x7000  /* L0s Exit Latency */
-#define  PCI_EXP_LNKCAP_L1EL   0x38000 /* L1 Exit Latency */
-#define  PCI_EXP_LNKCAP_CLKPM  0x40000 /* L1 Clock Power Management */
 #define PCI_EXP_LNKCTL         16      /* Link Control */
-#define  PCI_EXP_LNKCTL_RL     0x20    /* Retrain Link */
-#define  PCI_EXP_LNKCTL_CCC    0x40    /* Common Clock COnfiguration */
 #define  PCI_EXP_LNKCTL_CLKREQ_EN 0x100        /* Enable clkreq */
 #define PCI_EXP_LNKSTA         18      /* Link Status */
-#define  PCI_EXP_LNKSTA_LT     0x800   /* Link Training */
-#define  PCI_EXP_LNKSTA_SLC    0x1000  /* Slot Clock Configuration */
 #define PCI_EXP_SLTCAP         20      /* Slot Capabilities */
 #define PCI_EXP_SLTCTL         24      /* Slot Control */
 #define PCI_EXP_SLTSTA         26      /* Slot Status */